Hyundai Sirius engine


The Hyundai Sirius engine was the company's first larger inline-four engine, with displacements from 1.8 L to 2.4 L. It is a license-built Mitsubishi construction. This engine is no longer used by Hyundai.

1.5 Hyundai G4DJ

The 1.5-liter Hyundai G4DJ engine was manufactured from 1989 to 1995 under license from Mitsubishi and was essentially a copy of the 8-valve version of the popular 4G15 powerplant.
The engine's advertised power was 63 kW / 84 hp / 86 PS and 124 Nm / 91 lb-ft of torque.
SPECIFICATIONS:
Total Displacement: 1468.45cc '''

The Hyundai G4DJ engine was equipped on the following vehicles listed below:
1990-1995 Hyundai Elantra
1990-1993 Hyundai Scoupe
1989-1993 Hyundai Pony
1989-1994 Hyundai Excel

1.6 Hyundai G4CR

The 1.6-liter Hyundai G4CR is an in-line four, dual overhead camshaft engine manufactured from 1990 to 1995 under license, as it was in fact a copy of the Mitsubishi 4G61 engine, and it was put on the first generation of the Lantra model. Unlike other power units of this series, this one never had a balancing shaft.
SPECIFICATIONS:
Total displacement: 1595 cc
Bore: 82.30 mm
Stroke: 75.00 mm
Compression Ratio: 9.2
Idle RPM: 750 ± 100
Ignition timing at idling speed: 5° ± 2°/750 rpm
Mitsubishi Orion 4G61 Reliability:
Low reliability is in the timing belt, and the consequences of its breakage are deplorable
This motor is prone to vibrations most often due to the destruction of motor bearings
The reason for the floating speed is usually the contamination of the throttle, injectors and PXX
Hydrocompensators here very quickly wear out and start to clink strongly

1.8

G4CN is the 1.8L DOHC engine based on the Mitsubishi 4G67. Both SOHC and DOHC versions were produced.
Bore and stroke is 81.5 mm × 88 mm or 82 mm × 88 mm
Application
G4CM is a 1.8L . Output is up to 98 hp at 5500 rpm with a 81.5 mm bore and 88 mm stroke
Application
G4JN is a 1.8 L Korean version DOHC engine with an 81.5 mm bore and 88 mm stroke. Output was up to 133 hp at 6000 rpm and 126 foot pounds of torque at 4200 rpm.
Application
G4CP is Hyundai's name for the 2.0 L Mitsubishi 4G63 engine.
Bore x stroke is 85 mm × 88 mm
Applications:
G4JP 2.0 is the 2.0 L Korean version. 85mm bore and 88mm stroke. It has a cast iron engine block and aluminum DOHC cylinder heads. It uses MFI fuel injection, has 4 valves per cylinder and features forged steel connecting rods. Output is 136 hp at 6000 rpm and 136 foot pounds of torque at 4500 rpm.
Applications:
4GA1-1 JAC's 4GA1-1 was learnt from HYUNDAI, it uses DOHC 16-valves ans SFI technology
Applications
JAC S1

2.4

There are two variants of the 2.4 L Sirius engine called G4CS and G4JS. The G4CS is of an SOHC design, its output is 120 PS.
Applications
The G4JS' has larger dimensions, different from those of other Sirius blocks at 86.5 mm and 100 mm with a compression ratio of 10. Output is 141 PS at 5500 rpm with 149 ft.lbf of torque at 3000 rpm. It has a cast iron engine block and aluminum DOHC cylinder heads. It uses MPI fuel injection and features forged steel connecting rods.
Applications