JCSAT-3


JCSAT-3 was a geostationary communications satellite designed and manufactured by Hughes on the HS-601 platform. It was originally ordered by JSAT Corporation, which later merged into the SKY Perfect JSAT Group. It has a mixed Ku band and C band payload and operated on the 128°E longitude until it was replaced by JCSAT-3A.

Satellite description

The spacecraft was designed and manufactured by Hughes on the HS-601 satellite bus. It had a launch mass of, a dry mass of and a 12-year design life. When stowed for launch, its dimensions were. With its solar panels fully extended it spanned, and its width when its antennas were fully deployed was. Its power system generated approximately 5 kW of power thanks to two wings with four solar panels each. It also had a single NiH2 battery composed of 30 cells and a 200Ah charge. It would serve as the main satellite on the 128°E longitude position of the JSAT fleet.
Its propulsion system was composed of an R-4D-11-300 LAE with a thrust of. It also used had 12 bipropellant thrusters for station keeping and attitude control. It included enough propellant for orbit circularization and 12 years of operation.
Its payload is composed of four octagonal antenna fed by twelve 36 MHz and sixteen 27 MHz Ku band plus twelve 27 MHz C band transponders for a total bandwidth of 1,296 MHz. The Ku band transponders have a TWTA output power of 63 Watts while the twelve C band transponders have 34 Watts of power.

History

On 1993, Japan Communications Satellite Company and Satellite Japan Corporation merged to form Japan Satellite Systems Inc.. That same year, JCSAT ordered JCSAT-3, a third satellite from Hughes, but this time using the HS-601 platform. In 1995, JCSAT obtained a license for international service, and thus became a regional operator.
On August 29 at 00:53:00 UTC, an Atlas IIAS launching from Cape Canaveral LC-36B successfully launched JCSAT-3 into orbit. It was positioned into the 128° East slot.
On April 20, 2004, JSAT ordered a second satellite from Lockheed, JCSAT-10. Based on the A2100AX platform, it would have a C band and Ku band payload and was expected to replace JCSAT-3 at the 128°East slot after its planned 2006 launch.
On October 11, an Ariane 5 ECA launched JCSAT-10 along Syracuse-3B into a transfer orbit. Upon successful deployment at 128°East longitude, it was renamed JCSAT-3A. On March 2007, JCSAT-3 was retired and decommissioned.