The first Jackson Lake Dam was a log-crib dam constructed in 1906–07 across the outlet of Jackson Lake, a natural lake. That dam raised the lake level by, but the dam failed in 1910. A new concrete and earthen dam was constructed in stages between 1911 raising the maximum lake level to above the lake's natural elevation, providing a storage capacity of. The new dam was designed by Frank A. Banks, who would later supervise the construction of Grand Coulee Dam. The reservoir was created by damming the outlet of the natural glacial Jackson Lake, with the additional height creating a storage pool for the Minidoka Project, which provides irrigation water from the Snake River for farmlands in Idaho. Jackson Lake stores and releases water which is collected by Minidoka Dam and American Falls Dam more than downstream for diversion to distribution canals. At the time of the dam's construction, Jackson Hole and the Teton Range were as yet unprotected from development. Grand Teton National Park was established in 1929, and excluded Jackson Lake. The lake was incorporated into Jackson Hole National Monument when it was proclaimed by President Franklin D. Roosevelt under the Antiquities Act, and became a part of Grand TetonNational Park in 1950 when the park was expanded to encompass the national monument lands. When the dam was built there was no attempt to clear the shores of the lake of standing timber, resulting in an unsightly band of dead trees when the waters rose. This vista, and the mudflats created by drawdown of lake waters, were cited in later years in successful arguments against reservoirs in Yellowstone National Park. Construction personnel for the dam were housed at a temporary camp that dwarfed the nearby town of Moran. Supplies came in from the Grassy Lake Road north of the park, which runs west into Idaho to meet the nearest railhead at Ashton, Idaho.
Reinforcement
The U.S. Bureau of Reclamation conducted studies on dams in 1976 and determined that Jackson Lake Dam was susceptible to failure in case of an earthquake of magnitude 5.5 or greater. Following the Borah Peak earthquake of 1983 in Idaho, the dam was upgraded during 1986–1989, and the Bureau of Reclamation believed it could withstand the "maximum credible earthquake," a magnitude 7.5 quake on the Teton fault. Since then various studies have cast doubt on this belief.
Dam facts and figures
The dam is owned and operated by the U.S. Bureau of Reclamation, which maintains the water level above the lake's natural elevation for downstream irrigation.
Type: Concrete gravity dam with earthen embankment wings