Java logging framework


A Java logging framework is a computer data logging package for the Java platform. This article covers general purpose logging frameworks.
Logging refers to the recording of activity by an application and is a common issue for development teams. Logging frameworks ease and standardize the process of logging for the Java platform. In particular they provide flexibility by avoiding explicit output to the console. Where logs are written becomes independent of the code and can be customized at runtime.
Unfortunately the JDK did not include logging in its original release so by the time the Java Logging API was added several other logging frameworks had become widely used - in particular and log4j. This led to problems when integrating different third-party libraries each using different logging frameworks. Pluggable logging frameworks were developed to solve this problem.

Functionality overview

Logging is typically broken into three major pieces: the Logger, the Formatter and the Appender.
Simpler logging frameworks, like , combine the logger and the appender. This simplifies default operation, but it is less configurable, especially if the project is moved across environments.

Logger

A Logger is an object that allows the application to log without regard to where the output is sent/stored. The application logs a message by passing an object or an object and an exception with an optional severity level to the logger object under a given name/identifier.

Name

A logger has a name. The name is usually structured hierarchically, with periods separating the levels. A common scheme is to use the name of the class or package that is doing the logging. Both log4j and the Java logging API support defining handlers higher up the hierarchy.
For example, the logger might be named "com.sun.some.UsefulClass". The handler can be defined for any of the following:
As long as there is a handler defined somewhere in this stack, logging may occur. For example a message logged to the com.sun.some.UsefulClass logger, may get written by the com.sun handler. Typically there is a global handler that receives and processes messages generated by any logger.

Severity level

The message is logged at a certain level. Common level names are copied from :
LevelDescription
FATALSevere errors that cause premature termination. Expect these to be immediately visible on a status console.
ERROROther runtime errors or unexpected conditions. Expect these to be immediately visible on a status console.
WARNINGUse of deprecated APIs, poor use of API, 'almost' errors, other runtime situations that are undesirable or unexpected, but not necessarily "wrong". Expect these to be immediately visible on a status console.
INFOInteresting runtime events. Expect these to be immediately visible on a console, so be conservative and keep to a minimum.
DEBUGdetailed information on the flow through the system. Expect these to be written to logs only.
TRACEmore detailed information. Expect these to be written to logs only.

The logging framework maintains the current logging level for each logger. The logging level can be set more or less restrictive. For example, if the logging level is set to "WARNING", then all messages of that level or higher are logged: ERROR and FATAL.
Severity levels can be assigned to both loggers and appenders. Both must be enabled for a given severity level for output to be generated. So a logger enabled for debug output will not generate output if the handler that gets the message is not also enabled for debug.

Filters

Filters cause a log event to be ignored or logged. The most commonly used filter is the logging level documented in the previous section. Logging frameworks such as Log4j 2 and SLF4J also provide Markers, which when attached to a log event can also be used for filtering. Filters can also be used to accept or deny log events based on exceptions being thrown, data within the log message, data in a ThreadLocal that is exposed through the logging API, or a variety of other methods.

Formatters, Layouts or renderers

A Formatter is an object that formats a given object. Mostly this consists of taking the binary object and converting it to a string representation. Each framework defines a default output format that can be overridden if desired.

Appenders or handlers

Appenders listen for messages at or above a specified minimum severity level. The Appender takes the message it is passed and posts it appropriately. Message dispositions include:

Considerations

JCL and Log4j are very common simply because they have been around for so long and were the only choices for a long time. The flexibility of slf4j has made it a popular choice.
SLF4J is a set of logging wrappers that allow it to imitate any of the other frameworks. Thus multiple third-party libraries can be incorporated into an application, regardless of the logging framework each has chosen to use. However all logging output is generated in a standard way, typically via Logback.
Log4j 2 provides both an API and an implementation. The API can be routed to other logging implementations equivalent to how SLF4J works. Unlike SLF4J, the Log4j 2 API logs Message objects instead of Strings for extra flexibility and also supports Java Lambda expressions.
JCL isn't really a logging framework, but a wrapper for one. As such, it requires a logging framework underneath it, although it can default to using its own SimpleLog logger.
JCL, SLF4J and the Log4j 2 API are useful when developing reusable libraries which need to write to whichever underlying logging system is being used by the application. This also provides flexibility in heterogeneous environments where the logging framework is likely to change, although in most cases, once a logging framework has been chosen, there is little need to change it over the life of the project. SLF4J and Log4j 2 benefit from being newer and build on the lessons learned from older frameworks. Moreover JCL has known problems with class-loaders when determining what logging library it should wrap which has now replaced JCL.
The Java Logging API is provided with Java. Although the API is technically separate from the default implementation provided with Java, replacing it with an alternate implementation can be challenging so many developers confuse this implementation with the Java Logging API. Configuration is by external files only which is not easily changed on the fly. The default implementation only provides a few Handlers and Formatters which means most users will have to write their own.