Jeep Forward Control
The Jeep Forward Control is a truck that was produced by Willys Motors, later named Kaiser Jeep, from 1956 to 1965. It was also assembled in other international markets. The layout featured a cab over design.
The Forward Control models were primarily marketed as work vehicles for corporate, municipal, military, as well as civilian use. Regular pickup box beds were standard, but customers were offered a large number of "Jeep approved" specialized bodies from outside suppliers. These ranged from simple flatbeds to complete tow trucks, dump trucks, and fire trucks. The vehicles were also manufactured under license in India and Spain.
Design
Willys produced utility vehicles that remained almost unchanged since 1947. As the marketplace grew more competitive in the 1950s, management developed a new range of modern cab and body trucks. Independent designer that was contracted by Willys since the 1940s, Brooks Stevens, used styling cues from full-size cab-over-engine trucks for this new futuristic-looking space-efficient vehicle with the center grille panel made to imitate the classic seven-slot Jeep design. The unconventional forward control layout and "helicopter look" of the cab was too unusual for mainstream buyers during that era, but they were successful in specialty markets that included airport service vehicles, tow trucks, and railroad crew trucks that could ride the rails. Numerous versions of the Forward Control Jeeps were manufactured for general and specialized applications with 1957 being the top production with almost 10,000 vehicles built that year.Engineering was based on existing CJ-5. Power came from the Hurricane F-head and L-head 4-cylinder engines. The updates in 1958 on both the FC-150 and 170 versions had attained a goal established by Willys engineers to design a versatile commercial vehicle in which the ratio of the vehicle's curb weight to its payload was 1 to 1. According to the Society of Automotive Engineers, this was regarded as the lowest ratio offered by domestic manufacturers at that time within the standard light-duty commercial vehicle segment. The FC layout offered advantages including a short turning radius and large cargo bed size given the compact overall length.
Proposals included a "Forward Control Commuter" design that may have been among the earliest minivan-type vehicles. Three operational concept cars were built by :de:Stuttgarter Karosseriewerk Reutter|Reutter in Stuttgart, West Germany. Brooks Stevens was also involved in the transformation of this truck platform into a passenger vehicle.
FC-150
Introduced in 1956, FC-150 models were based on the CJ-5 with its wheelbase, but featuring a long cargo box. This was a record-breaking six-foot length load bed on a vehicle whose total length was two inches shorter than the diminutive two-seat Nash Metropolitan. The rugged design and go-anywhere capability included a claim that the FC could climb grades of up to 60% and reviews by Mechanix Illustrated highlighted the vehicle's toughness and surefootedness.In 1958, the FC-150 received a new, wider chassis. Its track was widened from to. A 1958 FC-150 concept featured an wheelbase, a widened track, and the new T-98 4-speed manual transmission. This model had a gross weight of.
FC-170
Introduced in 1957, FC-170 models had a wheelbase with a bed. This was achieved by the forward-control layout. A 1958 concept version of the FC-170 featured a wheelbase. This was required to accommodate a new V8 engine with a new transfer case. A new 3-speed automatic transmission was only available with the inline-6 due to possible driveshaft angle issues. A T-98 4-speed manual was available with both engines. This model had a gross weight of.FC-170 DRW
This is a dual-wheeled rear axle model with a load bed. These models have gross weights of or.FC-180
The FC-180 was shown in concept form on paper in a 1957 Willys company brochure titled "1958 Projects - Product Engineering". It was essentially a lengthened FC-170 DRW. Features included a 150 in flatbed, the "Super Hurricane" inline-6 or the V8 as available engines, and the T-98 4-speed manual or 3-speed automatic as available transmissions. This model had a gross weight of.FC-190
The FC-190 was also shown in concept form in 1957. It featured a wheelbase, a flat bed and tandem dually axles. The T-98 manual transmission was standard with the automatic as an option. No six-cylinder option was offered; standard was the V8. The FC-190 would use components from the FC-170 and FC-180 to keep costs down. This model had a gross weight of.Production
The FC Jeeps were exhibited to Jeep dealers in a closed-circuit telecast on November 29, 1956, and were on display for the public at the December 1956 National Automobile Show in New York City. The FC-150 went on sale at dealer showrooms on December 12, 1956. The initial response to the four-wheel drive FC Jeeps was favorable. Their best sales year came in 1957, when 9,738 trucks were sold. After the introduction of the FC-170 in 1957, FC-150 sales dropped to 1,546 units in 1959, before rebounding to 4,925 in 1960.Brooks Stevens made a rendering around 1960 for a possible facelift for the FC-series.
The FC models did not become the big sellers that Willys had hoped. Total production in nine years was just over 30,000 units. The FC line was discontinued in 1964.
Military variants
Four dedicated military variants of the FC-170 were manufactured for the U.S. Navy and Marine Corps, under a 1964 contract. Production is estimated to have been between 400 and 700 units, mostly the M677 four-door pickups. A 1963 analysis done by Jeep, concluded that the militarized FC-170s compared favorably to the aging Dodge M37, at least for behind the front-line service. The XM-676 prototype had a 50% larger cargo cube, could carry 12 troops in the back instead of eight in the M-37, had a 700-pound greater load rating, and yielded more than twice the mileage, but Jeep was likely more focused on landing the contract for the M-715 trucks that replaced the M-37.The official operator's and service manuals were written and published by Kaiser Jeep – not by the army. The general government description of the vehicles was 'Jeep' Truck, Diesel engine, 7000-pound GVW, 4x4, with the variants named:
- M676 Truck, Cargo Pickup — a modified version of the commercial FC-170 pickup
- M677 Truck, Cargo Pickup w/4 Dr. Cab — a four-door crew-cab pickup with a canopy over the bed
- M678 Truck, Carry All — a van-body FC-170 with windows, and three cabin doors, and
- M679 Truck, Ambulance — a van-body FC-170 with two cabin doors and no further sidewindows, fitted as an ambulance
Foreign market models
Numerous versions of FC models were manufactured in many other nations under collaboration agreements with successive owners of Jeep: Willys-Overland, Kaiser Jeep, and American Motors Corporation.India
in Bombay, India began its vehicle business in 1947 by assembling complete knock down Jeeps. It started FC-150 production in India in 1965 and later expanded the model range for the domestic market to include the FC-170, as well as its own intermediate sized FC-160.The FC-160 uses a wheelbase. The pick-up box was by Mahindra and other bodies were available. The "cowl and chassis only" FC-160 model was popular during the 1970 s for conversion into mini-buses, ambulances, and other vehicles. Most have the basic front face of the FC. Manufacture of the Mahindra FC-160 pickup truck ended in the summer of 1999.
The FC-260 Diesel light truck was introduced in 1975. Currently, Mahindra's four-wheel drive FJ-460 and two-wheel drive FJ-470 van or mini-bus vehicles retain the grille arrangement of the original Forward Control. These vehicles can accommodate from 11 to 15 passengers plus the driver.
Spain
In the 1960s, Kaiser-Willys licensed Vehículos Industriales y Agrícolas of Zaragoza in Aragon to build Jeeps in Spain. Beginning in 1970, the "SV" line of commercial trucks were built using the Commando 4x4 Jeep chassis, just like the FC models in the United States.However, the Iberian models were unlike any Jeeps produced anywhere else and featured indigenously developed body designs. The SV line included the Campeador, Duplex, Furgon, and the Toledo. Two engines were available: the Super Hurricane in-line six petrol and a Perkins 4-cylinder diesel.
During the late 1970s, VIASA was absorbed by Ebro trucks, a division of Motor Ibérica. Production of the full SV line continued until 1985, which also included versions for the Spanish army.
Nissan took complete control of Ebro in 1987 and the company was named Nissan Motor Ibérica.