Ka-Bar
Ka-Bar is the contemporary popular name for the combat knife first adopted by the United States Marine Corps in November 1942 as the 1219C2 combat knife, and subsequently adopted by the United States Navy as the U.S. Navy utility knife, Mark 2. Additionally, Ka-Bar is the name of a related knife manufacturing company, Ka-Bar Knives., Inc., of Olean, New York, a subsidiary of the Cutco Corporation.
Although Ka-Bar Knives, Inc., currently makes a wide variety of knives and cutlery, it is best known for the Ka-Bar Fighting/Utility knife, which has traditionally used a 1095 carbon steel clip point blade and leather-washer handle.
History
After the United States' entry into World War II, complaints arose from Army soldiers and Marines issued World War I-era bronze or alloy-handled trench knives such as the U.S. Mark I trench knife for use in hand-to-hand fighting. The Mark I was relatively expensive and time-consuming to manufacture, and reports from the field indicated that the knife's large 'brass-knuckle' fingerguard handle made it difficult to secure in conventional scabbards while limiting the range of useful fighting grip positions. Another criticism was that the Mark I's relatively thin blade was prone to breakage when used for common utility tasks such as cutting wire or opening ammunition crates and ration cans. A final impetus came from the War Department, which had determined the need for a new multipurpose knife capable of fulfilling the roles of both a fighting and a utility knife, while at the same time conserving strategic metal resources.The Marine Corps authorized limited issuance of a fighting knife with a stiletto blade design, the Marine Raider Stiletto designed by Lt. Col. Clifford H. Shuey, a Marine Corps engineering officer. Shuey's pattern was essentially a copy of the Fairbairn–Sykes fighting knife with altered material specifications designed to reduce dependence on critical strategic metals. The Raider stiletto was initially issued to elite Marine forces, including the entire 1st Marine Raider Battalion commanded by Colonel Merritt A. Edson, the USMC 1st Parachute Battalion, and to Marines of the 2nd Marine Raider Battalion commanded by Lt. Col. Evans F. Carlson. Primarily intended as a thrusting weapon, the Marines of the 1st Raider battalion found the Raider stiletto to be well designed for silent killing, but was of little use for any other purpose, and too frail for general utility tasks. After their first combat, many Marines in the 2nd Raider Battalion exchanged their Raider stilettos for No. 17 and No. 18 Collins general-purpose short machetes purchased with unit funds. The Collins machetes, which superficially resembled a large Bowie knife, were also issued to some Army air crews as part of the Jungle Emergency Sustenance Kit of 1939.
In the absence of suitable official-issue knives, a number of Marines deploying for combat in 1942 obtained their personal knives through private purchase, usually hunting/utility patterns such as Western States Cutlery Co.'s pre-war L76 and L77 pattern knives, both of which had Bowie type clip blades and leather handles. The Western States L77 was stocked at the San Diego Base Exchange at the onset of the war, and knives of this pattern were carried by many Marines in the 1st Marine Division as well as by Marine Raiders in the 2nd Marine Raider Battalion commanded by Lt. Col. Evans F. Carlson.
In response to a specification requesting a modern individual fighting knife design for the U.S. Marines, ordnance and quartermaster officials requested submissions from several military knife and tool suppliers to develop a suitable fighting and utility knife for individual Marines, using the U.S. Navy Mark 1 utility knife and existing civilian hunting/utility knives such as Western's L77 as a basis for further improvements. Working with Union Cutlery, USMC Colonel John M. Davis and Major Howard E. America contributed several important changes, including a longer, stronger blade, the introduction of a small fuller to lighten the blade, a peened pommel, a straight steel crossguard, and a stacked leather handle for better grip. The blade, guard, and pommel were Parkerized instead of the bright polished steel of the prototype. The design was given the designation of 1219C2 The knife used a thicker blade stock than that of the USN Mark 1 utility knife, and featured a clip point. After extensive trials, the prototype was recommended for adoption. The Marines' Quartermaster at the time initially refused to order the knives, but his decision was overruled by the Commandant. The Marine Corps adopted the knife on November 23, 1942.
The knife proved easy to manufacture, and the first run was shipped Jan. 27, 1943, by Camillus Cutlery Company. After the U.S. Navy became disenchanted with blade failures on the USN Mark 1 utility knife, the latter service adopted the Ka-Bar as the US Navy Utility Knife, Mark 2. The Marine Corps in turn re-designated the Ka-Bar as either the USMC Mark 2 Combat Knife, or simply the Knife, Fighting Utility. In naval service, the knife was used as a diving and utility knife from late 1943 onward, though the stacked leather handle tended to rot and disintegrate rapidly in saltwater.
in Pakistan. The Marine Corps issued Ka-Bar fighting utility knife throughout Marine forces, with early deliveries going primarily to elite formations. In late 1943 the Ka-Bar replaced the Marine Raider Stiletto in service, a change welcomed by the Marines of Col. Edson's 1st Raider Battalion, who found the Raider stiletto ideal for silent killing but of little use for anything else. As the knife went into large-scale production, the Marines issued the Ka-Bar Fighting Utility knife to reconnaissance and engineering units and to any Marine armed with the M1911 pistol, M1 carbine, BAR, or crew-served machine gun. Marines were often issued knives with "U.S.N. Mark 2" markings when Navy-issued Ka-Bar knives were all that was available. By 1944 the Ka-Bar knife was issued to virtually any Marine in the combat branches who desired one, and was in use by Marine Corps close combat instructors for training new recruits. Unlike the prior Marine Raider stiletto, Marines were taught to use their new knife primarily as a slashing weapon in the initial phases of hand-to-hand combat.
As its new name implied, the "Knife, Fighting Utility" was designed from the outset as a dual-purpose knife: it was both an effective combat knife and a utility tool, well-suited to the type of jungle warfare encountered by Marines in the Pacific theater. This dual-purpose design resulted in some initial criticism of the pattern as being less than ideal for knife fighting, but combat experience of returning veterans as well as reports from the battlefield dispelled doubts about its combat effectiveness.
After the Second World War, the U.S. Navy and Marine Corps continued to use the Ka-Bar Fighting Utility knife. In addition to military contract knives, the knife was produced for the civilian market, and the pattern enjoyed some popularity as a general-purpose hunting and utility knife.
Manufacturers and the "Ka-Bar" name
Camillus Cutlery Co., the first and largest manufacturer to supply the knife, produced over 1 million with "Camillus.N.Y." on the knife's crossguard. Besides Camillus, the Union Cutlery Co., Robeson Cutlery Co., and PAL Cutlery Co. produced the Ka-Bar knife under military contract during World War II.After the end of World War II, Utica Cutlery Co., Conetta Cutlery Co., Camillus, and, around 1980, Ontario Knife Co., all produced the knife under contract for the U.S. military. From 1945-1952, Weske Cutlery Co. of Sandusky, Ohio, purchased leftover and overrun parts from wartime knife contractors and assembled them for commercial sale, polishing out manufacturer and military markings, and fitting them with ungrooved leather handles. Though W.R. Case made two prototype Ka-Bar knives as part of a contract submission in 1942-43, no contract was ever awarded to Case for the production of the knife. In 1992, Case would release a modern commemorative of these prototypes, the Case XX USMC Fighting Utility Knife. The Case knife is actually manufactured for Case by Ontario Knife Co.
The originator of the KA-BAR trademark, Union Cutlery Co, began using the name in 1923, having received a letter from a fur trapper who had used the knife to kill a wounded bear which attacked him when his rifle jammed. According to company records, the letter was only partially legible; "ka bar" could be read, as fragments of the phrase "kill a bear". In 1923, the company adopted the name Ka-Bar from the "bear story" as its trademark. From 1923, the KA-BAR trademark was used as a ricasso stamp by Union Cutlery Co. on its line of automatic switchblade pocket knives, including the KA-BAR Grizzly, KA-BAR Baby Grizzly, and KA-BAR Model 6110 Lever Release knives. The company produced about 1 million knives with the trademark on the ricasso. By 1944, Marines began referring to the knife as the "KA-BAR", regardless of manufacturer. The popular designation of the knife may also have resulted from contact with Marine Corps close combat instructors in San Diego, who used the name when training recruits. To capitalize on the popularity, Union Cutlery changed its name to Ka-Bar Cutlery Inc. in 1952.