Kawasaki Ninja H2


The Kawasaki Ninja H2 is a "supercharged supersport" class motorcycle in the Ninja sportbike series, manufactured by Kawasaki Heavy Industries, featuring a variable-speed centrifugal-type supercharger. The track-only variant is called Ninja H2R, and it is the fastest and most powerful production motorcycle on the market; it produces a maximum of and with ram air. The H2R has 50% more power than the fastest street-legal motorcycles, while the street-legal Ninja H2 has a lower power output of – with ram air.
Its namesake is the 750 cc Kawasaki H2 Mach IV, an inline triple that was introduced by Kawasaki in 1972 to "disrupt what it saw as a sleeping motorcycle market".

H2R top speed

2015

In June 2015, TT race competitor James Hillier rode a Kawasaki H2R as an inter-race demonstration lap, at near-race speeds, using normal Superbike slick race tires, around the 37-mile road course, leading to a roads TT record of the highest top speed attained in the Isle of Man by a motorcycle. The top speed of "over 206 mph" on the Sulby Straight was recorded on Hillier's personal Strava GPS smartphone app for cyclists.

2016

On June 30, 2016, Kenan Sofuoglu, a five-time world champion Supersport circuit-racer, made a top speed attempt. Kawasaki supplied a stock H2R, other than special-formula rubber tires developed by Pirelli for the top speed attempt to withstand extreme high speeds, and the bike was supplied with race-grade fuel. Sofuoglu was supplied with a special one-piece leather suit to enhance aerodynamics for his record attempt.
This attempt, with the Turkish president in attendance, was made across the then-newly completed Osman Gazi Bridge, the fourth longest in the world at just over a mile and a half. Kawasaki quoted the H2R maximum speed to be. After training and preparing for four months, a speed of in just 26 seconds was claimed by a video-recording of the bike's dashboard display.
The speed was not officially confirmed or independently verified. No fixed point optical sensors for distance/speed calculations, chronometers or hand-held devices were used, and later with a theoretical calculation, of the distance he traveled in 26 seconds on the bridge. Cycle World's Kevin Cameron had calculated two years earlier that with the right gearing, the H2R's engine power could theoretically overcome aerodynamic drag up to.

Street-legal Ninja H2

The street-legal Ninja H2 has rear-view mirrors in place of the track-only H2R's wings. It also has plastic body panels in place of the H2R's carbon fiber. The street-legal bike is said to make, probably with reduced supercharger boost compared to the H2R. The H2 and H2R share the supercharger and many other components, with the exception of head gasket, cam profile and timing with ECU mapping, and exhaust system as well as the R's clutch has two additional plates. Cycle World recorded a mile time of 9.62 sec. @ with a 0 to 60 mph acceleration at 2.6 seconds and a top speed of. Kent Kunitsugu, editor for Sport Rider magazine, competing in a land-speed racing event in Mojave, California at the Mojave Air and Space Port airfield in the Mojave Magnum land-speed racing, took a Ninja H2 with just a few bolt-on performance parts adding over 70 horsepower and achieved a top speed of.
For 2017, Kawasaki made a limited-edition model with 120 units produced globally: the individually-numbered Kawasaki Ninja H2 Carbon with special paint and carbon-fiber upper cowl. For 2017, the standard model Kawasaki Ninja H2 is also updated.
For 2018, Kawasaki made a new sport touring version of the H2, the , with a claimed wet weight of. Features that are options on the base model H2 SX come standard on the Kawasaki H2 SX SE, which has a claimed wet weight of. With revised throttle bodies, camshafts, crankshaft, pistons, cylinder and cylinder head as well as a new exhaust system aimed at increasing mid range torque. The intake system and supercharger impeller were also redesigned. A new larger fuel tank, rear trellis subframe and panniers increase the bike's weight by.
For 2019, the H2 received an update with 15 percent more power from updates to the intake, plugs, ECU, air filter and more. There is new all LED lighting and a special top coat on the paint that is claimed to be self healing, which in warmer conditions, is able to smooth over small scratches. Also new are lighter and smaller Brembo Stylema calipers, a new TFT dash, plus smartphone connectivity that gives vehicle information about GPS route information, speed, rpm, gear position, fuel mileage, fuel level, and odometer. In addition, the 2019 H2 SX SE+ version features Electronic Control Suspension.

Speed record

On August 12, 2018, rider Shigeru Yamashita with an unofficial team of Kawasaki employees set a speed record in the Southern California Timing Association P-PB 1000 class for under-1,000 cc displacement production supercharged motorcycles with limited modifications at the Bonneville Speedway. On August 15, he broke his own record with a new speed of.

Construction

Kawasaki selected the literbike platform for its top-of-the-line Ninja H2-H2R model, rather than continuing with the higher-displacement hyperbike Ninja ZX-14. Kevin Cameron explained that the liter-class is "the center of the high-performance market", attracting the best development in racing, with the best chassis and suspension design, so it made sense for Kawasaki to create a machine that could leverage this.

Engine and supercharger

The H2-H2R engine is a 998 cc inline-4, four-valve, dual overhead cam design with a two-speed, centrifugal supercharger. The supercharger is driven by a series of gears and shafts connecting the flywheel to a planetary drive, finally spinning a dog-shifted two-speed shaft attached to the impeller. Rider control is throttle by wire.
It is the first production motorcycle with a supercharger, although turbochargers were available on some models in the early 1980s.
A centrifugal supercharger has the advantage of generating less heat than other designs, especially scroll-type or screw-type superchargers. Excess heat in the intake charge can cause pre-ignition that will destroy the engine.

Electronic aids

Electronic rider aids include anti-lock braking system, traction control, engine braking control, Kawasaki quick shifter, electronic steering damper, and launch control.

Aerodynamics

The front fairing of the Ninja H2R incorporates stub-wings which are made of carbon fiber, just like the rest of the H2R-exclusive bodywork. They may be aerodynamic devices designed to create a low-pressure zone to help move cooling air through the engine bay, or to produce downforce at high speed, or to provide straight-line stability in a short-wheelbase sportbike chassis.

Chassis

The H2 and H2R have a tubular, thin-wall steel trellis frame and a single-sided swingarm, with traditional sportbike wheelbase.
Explaining the advantages of the Kawasaki approach to exploiting aerodynamics instead of lengthening the wheelbase, a South African writer said "It's easy to build stability into a hard-accelerating drag machine with a long wheelbase...but Kawasaki wanted a track-day machine, one that would also go round corners."
High speed motorcycles often have long wheelbases: extra length is added by the extended swingarm on a typical dragbike; a typical land speed record streamliner has a meters-long wheelbase.

Pre-Intermot engine announcements and analysis

The H2 was pre-announced by Kawasaki in a late 2014 teaser campaign, and was widely expected to be fully revealed at the Intermot trade show the same year. Before full details were released by Kawasaki, the supercharged inline-4 engine was thought by several industry observers to be identical to, or closely related to, a nearly 1,000 cc inline-4 unit with a centrifugal supercharger displayed by Kawasaki at the 2013 Tokyo Motor Show. Kevin Cameron published an analysis showing an engine of that displacement, mildly boosted at, would generate, beyond that of Kawasaki's current leader, the )
ZX-14. The same engine would generate with of pressure. His analysis included a discussion of the benefits of a two-speed supercharger for this application, to provide more linear power delivery. Cameron also said Kawasaki patent documents suggested the engine would rely on evaporative cooling using port fuel injection, instead of a bulky intercooler.
Kawasaki claimed the 2013 model was the first supercharger designed by a motorcycle manufacturer. In 2013, journalists said that the engine could power the "next generation ZX-14R" sportbike. Journalists also noted that Kawasaki already has a production inline-4 supercharged engine powering the Jet Ski Ultra 300X personal water craft.

Production announcement

At the 2014 Intermot motorcycle trade show on September 30, 2014, Kawasaki announced that a race-only Ninja H2R model would be produced in addition to the street-legal, lower power, Ninja H2 which would be fully revealed at the EICMA trade show in November. The bike was shown for the first time in North America at the AIMExpo show at Orlando, Florida in October, 2014.
Kawasaki made public some details about the Kawasaki H2's engine at Intermot. It was confirmed to be a 998 cc inline-four engine with a supercharger, producing in the H2R racetrack-only variant, still by far the highest rated engine ever for any factory production motorcycle, 50% more than its nearest competitor, the BMW S1000RR.

Reactions

Global press coverage both before and after Intermot was extensive.
Before the full reveal of the H2R, reactions tended to emphasize the reintroduction of forced induction to the motorcycle marketplace, with headlines like "Hail the New Supercharged Era", "Supercharged Ninja imminent", "New Kawasaki sports bike will use a 1000cc supercharged engine", "Kawasaki officially uncovers Ninja H2 supercharger", "Kawasaki Ninja H2: How the supercharger works" |Motociclismo ), and "Kawasaki's H2 superbike: A technical look at Kawasaki’s upcoming supercharged superbike".
After the introduction, before any test rides had even been permitted, coverage turned to both the bike's unusual styling and its precedent setting power. Both industry and general-readership press said the machine "will beat up the supersport scene with a steam hammer", "smashes the superbike class", is "a game changer" "a quantum leap into the future that redefines the way we see motorcycles", and "the poster child of 2-wheeled insanity ... so extreme it's hard to comprehend", or was simply "radical" and even "ludicrous".
Cycle World and Motor Cycle News both commented on how Kawasaki had claimed the high end of the market with the H2, moving past a stagnant market full of cookie-cutter sportbikes and low-priced entry level bikes, and had set up the H2 as a halo model for the entire brand. Cycle World's Kevin Cameron said "When we look at the current crop of 1000s, all date from before our present "recession," and what little has come by way of new product has sought to please the mostly imaginary "new buyer" with low-tech delights." Highlighting Kawasaki's ability to create a product leveraging aerodynamic, turbine and engine technology design expertise from across the large Kawasaki Heavy Industries conglomerate, an unsigned Motor Cycle News'' piece said "The H2R you see here is the very pinnacle of what Kawasaki can do ... This is the firm's halo product, and every element is Kawasaki at its very best, from the engine and aerodynamic development, through to the mirror-finish black chrome paint specially developed for this model."
Some analysts noted odd features of the supposedly track-only H2R model. Although it is outfitted with racing slicks and lacks many features required on a street-legal vehicle in most jurisdictions, such as headlights, rear view mirrors, and turn signals visible from the front or sides, it also has features that are unusual or absent on pure track bikes, such as an ignition lock and LED tail lights.
Specifications in the infobox are from Kawasaki unless noted.

Footnotes