Kawasaki T-4


The Kawasaki T-4 is a Japanese subsonic intermediate jet trainer aircraft developed and manufactured by the commercial conglomerate Kawasaki Heavy Industries. Its sole operator is the Japan Air Self-Defense Force, in part due to historic restrictions on the exporting of military hardware. In addition to its primary training mission, the T-4 has been used by the JASDF's Blue Impulse aerobatic team as well as liaison duties with most fighter units. The first XT-4 prototype flew on 29 July 1985, while the first production aircraft was delivered during September 1988.

Development

Origins

During November 1981, Kawasaki was selected as the main contractor to design and manufacture a suitable trainer aircraft, which was initially designated as the KA-850, to meet the needs of Japan's MT-X program, having beaten out rival bids from Mitsubishi and Fuji. The MT-X program had been launched to procure a replacement for the aging Lockheed T-33 and Fuji T-1 jet trainer aircraft then in service in the Japan Air Self Defense Force. Furthermore, there was also a desire for the prospective trainer aircraft to take over some of the syllabus that was being handled by the contemporary Mitsubishi T-2, a supersonic trainer variant of the Mitsubishi F-1 fighter aircraft. The initial program planned for a production run of 220 aircraft and an entry into service date of 1988.
Kawasaki's design team was headed by the aeronautics engineer Kohki Isozaki, as well as working in close conjunction with planners at the Japanese defense agency. The design produced by Kawasaki had to satisfy aspects of the JASDF's training regime that was previously performed by multiple aircraft. As such, the type had to demonstrate a range of transonic aerodynamic effects, as well as achieving a high level of manoeuvrability, a relatively-low operating cost, and high reliability levels. Easy handling was also required so that trainees could convert from the piston-engined Fuji T-3 after accumulating only 70 flying hours. Furthermore, the economics for operating the type was to be comparable to the leading international competitors at that time.
The design had to incorporate other political desires as well; there was a great value placed upon powering the type with the first all-Japanese production turbofan engine, the Ishikawajima-Harima F3-IHI-30. Reportedly, the selection of a twin-engine configuration for the trainer was one of the easiest decisions taken, being made not just for engine power but from a high priority being placed upon safety. A robust, damage-tolerant and long-lived structure was also specified for the trainer; in order to achieve this, it was decided to make limited use of composite materials in the form of carbon fiber and kevlar in areas such as the radome and elements of the rear wing, tail unit, and undercarriage. Extensive use of computer-aided design and computer-aided manufacturing techniques was also applied. These advances contributed to the design being certified for a total lifespan of 7,500 flight hours.
Out of these efforts emerged the T-4, a clean-sheet indigenously-developed trainer aircraft. According to aerospace publication Flight International, it was considered plausible for the T-4 to have been a competitive product upon the global trainer aircraft market if it had been priced appropriately, but such export opportunities were denied by a long-standing Japanese policy that forbids any military export sales. As such, there was no realistic prospect of the type being sold to overseas customers and it was developed for the onset with the understanding that the T-4 would be used only by the JASDF.

First flight

On 29 July 1985, the prototype for the type, designated as the XT-4, performed its maiden flight. Reportedly, test pilots of the Air Proving Wing who flew the XT-4 observed the type to have greater subsonic manoeuvrability than the McDonnell Douglas F-15 Eagle, an agile aerial supremacy fighter. Speaking in the months before the XT-4's maiden flight, Kawaski publicly claimed that the aircraft possessed the highest performance of any subsonic trainer aircraft then available. Despite the limited availability of the F3-IHI-30 engine, it proved to be reliable, preventing any serious limitation being imposed on the wider test programme. Flight testing with the four XT-4 prototypes ended after two and a half years and roughly 500 individual flights made; in response to the feedback produced, only minor changes, such as improved brakes and refinements of the hydraulically actuated flight control system, were made.
On 28 June 1988, the first production T-4 conducted its first flight; deliveries to the JASDF began in September of that year. It was observed by Kawasaki that the programme had not only been delivered as per schedule, but both the aircraft and its Ishikawajima-Harima F3-IHI-30 powerplant had attained their respective cost targets; Flight International contrasted the T-4 against the American Fairchild T-46, a cancelled jet trainer which had cost five times as much as Kawaski's offering without reaching production.
Manufacture of the T-4 was performed by a consortium consisting of Mitsubishi, Fuji, and Kawasaki, the latter providing leadership over the venture. A final assembly line for the type was established at Kawasaki's plant in Gifu; this line was sized to produce a maximum of two and a half aircraft per month. Originally, an eight-year production run was planned for.

Design

The Kawasaki T-4 is a Japanese subsonic intermediate jet trainer aircraft. It is a twin-engined aircraft, being powered by pair of Ishikawajima-Harima-built F3-IHI-30 turbofan units. These engines, which were capable of generating up to 3,520 lb of thrust, were indigenously-developed in conjunction with the T-4. Flight International observed that the performance of the T-4 was comparable with several widely exported jet trainers, such as the Franco-German Dassault/Dornier Alpha Jet and British BAE Systems Hawk. Specifically, the T-4 possessed a lower wing loading and 20 per cent greater thrust-to-weight ratio than either of these aircraft, easily permitting an initial climb to altitude rate of 10,000 ft per minute. While no combat-orientated model of the aircraft has been developed to date, the standard T-4 features three hard points, enabling the installation of various air-to-air missiles, bombs, and a gun pod.
The T-4 has a sturdy, damage-tolerant airframe that is largely composed of conventional aluminium alloys, although some composite materials are also present in some areas. Its structure has sufficient strength to enable high-g manoeuvres, being rated to perform instantaneous dives of 7.33g when flown in a clean configuration. It is furnished with a thick-section transonic aerofoil, which was developed by Kawasaki and Japan's Technical Research and Development Institute to provide outstanding high-angle-of-attack handling and favourable spin characteristics. An unusual aerodynamic feature present on the T-4 is the compact leading-edge root extensions just forward of its wings along the forward fuselage, these generate additional vortex lift and enhance the aircraft's high-g departure tendencies, such as the suppression of wing-drop and pitch-up during aerodynamic stalls. The use of LERX avoided any need for vortex generators.
The avionics of the T-4 are digital in nature; this approach was chosen in order to reduce both the size and weight of the avionics while also increasing their reliability. Typically, these systems and components have been indigenously produced, albeit with the incorporation of some base technologies from several American industries; examples of this include the inertial guidance system, which uses Honeywell-built laser gyroscopes, while the air data computer uses Sperry-supplied transducers. The majority of onboard systems are of a conventional nature; however, according to Flight International, the use of a licensed onboard oxygen generation system is an unusual choice for a trainer aircraft and had required considerable effort to adapt it for use aboard the T-4. A British-sourced artificial feel system is also used by the type, the components for which being locally manufactured.

Variants

are equipped with T-4s as trainer/liaison aircraft.

Citations