Kurogane Type 95


The Type 95 was a Japanese scout car built by Tokyu Kurogane Industries, and was used during the war with China and World War II in the East. Between 1936 and 1944 approximately 4,700 were built. It was the only completely Japanese designed reconnaissance car ever used by the Imperial Japanese Army, which tended to use civilian cars.
It is the world's first four-wheel drive passenger vehicle placed into mass production before the Willys MB, which was introduced in 1941, the Daimler Dingo in 1940, the Volkswagen Schwimmwagen introduced in 1942, and the GAZ-61 in 1938. Its nickname is the "Yonki" which in Japanese means "all-wheel drive". In the field, soldiers often called it the "daruma".
Only four examples remain: one built in 1941 displayed at the :ja:日本自動車博物館|Motorcar Museum of Japan, one at the Retro Auto Museum in Moscow, Russia, one at the in Pennsylvania, USA, and a 1939 model discovered in 2013 in a repair shop in Kyoto. It was extensively restored at the request of Masahiko Kobayashi, at a cost of ¥13.24 million which was crowd-funded, and was added to a Japanese military museum. The unveiling of the restored car with running engine is shown on video at the NHK World website.

History

The Type 95 accommodated 3 persons - two in the front and one in the back. The two-cylinder, V-twin, four-stroke, air-cooled gasoline engine, which developed @ 3,300rpm, was an advantage in cold climates found in China, and had 4-wheel drive, using a gearshift activated transfer case to engage the front wheels. It was manufactured without weapons and unarmored. It had advantages over the Type 97 motorcycle used by the Japanese Army, which had much less off-road mobility, and so limited troop mobility. It had tall, narrow wheels which helped it to travel over rough terrain, mud and snow.
It was conceived in 1934, by the Japanese Imperial Army as a small rough terrain vehicle to do reconnaissance, deliver messages to the field, and transport personnel. The military asked Toyota Industries Corporation Motor Vehicles Division to collaborate with Kurogane to design and manufacture the new vehicle. Toyota MVD was building the Toyota G1, and Okamoto Bicycle and Automobile Manufacturing, which was absorbed into Daihatsu. The prototype was the result, using a Japanese-built internal combustion engine. Mass-production began in 1936. At the time, military operations in Mainland China and Southeast Asia, a mass-produced military vehicle equipped with Japan's first four-wheel drive mechanism, increased mobility in the area'a rough terrain. In 1934, Mitsubishi Heavy Industries had internally developed a prototype, four-door, four-wheel-drive sedan for personnel transport, called the Mitsubishi PX33, which was powered by a 6.7-litre four-cylinder diesel engine. Four prototypes were built before the project was cancelled.
The United States Army Jeep offered off-road ability and increased ground clearance, combined with a light truck approach to construction. The German Army had the Schwimmwagen. The Type 95 was developed as a passenger car as a better alternative to motorcycle personnel transport, with four-wheel-drive advantages over the Type 93 motorcycle with a side car and the Type 97 two-wheeled motorcycle, which was a licensed copy of a Harley-Davidson motorcycle. Lightweight dirt bikes were not invented yet.
In the 1930s, Japan's manufacturing infrastructure was less advanced than those of the US and Europe, and military manufacturing focused on ships and aircraft by Japan's premiere industrial manufacturer Mitsubishi, and armament and tank production by Mitsubishi's zaibatsu partners. Aircraft were largely built by Mitsubishi, Tachikawa Aircraft Company, and the Nakajima Aircraft Company which built most of the aircraft. Limited raw materials were also devoted to higher priorities. The goal was to build 5,000 Type 95 in a supporting role, largely by hand and without an assembly line.
This car was first used in the Nomonhan Incident, and later during the Pacific War and Greater East Asia War for its primary purpose, as well to carry mainland Army and Navy officer flagship passengers as a 4-door version. The front grille had the Imperial Japanese Army's five-pointed star which signified sakura, or cherry blossom, which has special cultural significance. 4,775 specimen of the car were built with some minor changes, such as mechanical and body adjustments. Production ended in 1944.

Bodystyle versions

Below is a list of models informally classified for convenience:
Some vehicles were modified in the field by front seat passengers opening the top hinged passenger side windshield up and using a light machine gun such as the Type 11 light machine gun, the Type 96 light machine gun, or the Type 99 light machine gun similar to a motorcycle sidecar. Because of its small size and weight, it was able to fit inside Japanese manufactured Kokusai Ku-8 airplane and deploying glider Airborne troops, specifically the Teishin gliding infantry regiment, and some cars also used an Autocannon machine gun.

Powertrain and engineering development

The inventor of the four wheel drive and the engine used in the Type 95 is also the founder of the Japanese Internal Combustion Engine Company, Tetsuji Makita. Mr. Makita was one of Japan's first automobile engineers during the 1920s-1930s, and worked with Toyogawa Hayataya, who built the first automobile in Japan called the "Otomo" which was built by "Hakuyosha Ironworks, Inc." one of the first Japanese automobile manufacturers. Mr. Makita and the Japan Internal Combustion Engine Company had been at the time established as a leading manufacturer of the Japanese market automobiles, Auto rickshaws, and motorized tricycles, competing initially with Datsun and Mazda, with Mitsubishi and The Hope Automobile Company after the war. To set themselves as leading-edge Japanese manufacturers, the term "New Era" was used to advertise new, in-house developed engines in 1926, to coincide with the end of the Emperor Taishō era that ushered in the Emperor Shōwa era. Through a series of company reorganizations, the company was later renamed Kurogane.
The width of the vehicles was originally set at, but to better cope with the center of gravity compared to the Jeep and Schwimmwagen it was enhanced to. It had a narrow steel cruciform ladder frame chassis, and a wheelbase. The rear axle was a solid differential, with a semi-elliptical leaf spring suspension, the front wheels used coil springs and a double wishbone independent front suspension to enhance off road agility. The transmission had three forward speeds and one reverse gear that powered the rear wheels. A transfer case was used to temporarily engage the front wheels when necessary. Drum brakes were used on the rear wheels only, and it had a gas tank with for reserve, achieving. Its top speed on paved roads was, with a driving range of. To keep production and maintenance simple, universal joints were used to engage the front wheels.
During development, a horizontally opposed engine had been considered due to the harsh, cold conditions of Manchuria where the car would be deployed initially. The vehicle needed to be durable and easy to maintain, and a flat engine had advantages in the torque production needed to operate all four wheels. Air cooling also solved the problem of available cooling water and engine ruggedness. Kurogane also manufactured motorcycles, and keeping the engine as air-cooled helped with parts availability. The engine used for production was a Kurogane V1-AF motorcycle engine, with a bank angle of 45°, a V-type 2-cylinder OHV forced air-cooled engine with an engine displacement of 1.3 – 1.4 L developing @ 3,300rpm. It was a simple design, while the British made Sunbeam Motorcycle may have been used in reference to its development. The Japan Internal Combustion Engine Company was building three-wheeler trucks and motorcycles, using a single-cylinder engine of their "JAC” brand “Zaimasu" model motorcycle as the base engine used to develop the V2 engine. The front grille had a small hole to insert a handcrank to manually start the engine should the starter or battery fail.
In the prototype development stage, it was originally an air-cooled single-cylinder, borrowing from their current motorcycle products, but a V-twin engine proved more practical. To aid in cooling, a forced air cooling system used a propeller fan to further direct airflow across the cylinders without an encased cooling shroud, and it used a dry sump oil lubrication design. The carburetor was copied from a Wheeler-Schebler Carburetor Company design in a single barrel carburetor that was placed in the center behind the V-bank, distributing to the left and right cylinder bank, through a cross-flow cylinder head. The engine was suspended above the front wheel differential and in front of the transmission. This arrangement gave the vehicle a higher center of gravity, helping to keep the engine out of river crossing conditions, with the disadvantage of higher engine vibration than a horizontally-opposed engine layout. This trade-off meet the primary goals set before the development team. Manufacturing was simple thanks to the symmetrical implementation with the engine directly in front of the transmission, with a transfer case providing power to the front wheels installed directly below the engine. Because assembly was almost by hand, minor changes were made to various aspects of the car as the need arose, with the early prototype two-door enclosed sedan evolving into a roadster. While some vehicles over time had body changes, many of the production cars were not installed with doors, and the canvas roof for the two-door and four-door vehicles aided in reducing overall weight and adding flexibility to conditions in the field.