Layered double hydroxides


Layered double hydroxides are a class of ionic solids characterized by a layered structure with the generic layer sequence n, where c represents layers of metal cations, A and B are layers of hydroxide anions, and Z are layers of other anions and neutral molecules. Lateral offsets between the layers may result in longer repeating periods.
The intercalated anions are weakly bound, often exchangeable; their intercalation properties have scientific and commercial interest.
LDHs occur in nature as minerals, as byproducts of metabolism of certain bacteria, and also unintentionally in man-made contexts, such as the products of corrosion of metal objects.

Structure and formulas

LDHs can be seen as derived from hydroxides of divalent cations with the brucite layer structure n, by cation replacement, or by cation oxidation, in the metallic divalent cation layers, so as to give them an excess positive electric charge; and intercalation of extra anion layers between the hydroxide layers to neutralize that charge, resulting in the structure n. LDHs can be formed with a wide variety of anions in the intercalated layers, such as Cl−, Br−, NO, CO, SO and SeO.
This structure is unusual in solid state chemistry, since many materials with similar structure have negatively charged main metal layers and positive ions in the intercalated layers.
In the most studied class of LDHs, the positive layer consists of divalent and trivalent cations, and can be represented by the formula
where Xn− is the intercalating anion.
Most commonly, = Ca2+, Mg2+, Mn2+, Fe2+, Co2+, Ni2+, Cu2+ or Zn2+, and is another trivalent cation, possibly of the same element as M. Fixed-composition phases have been shown to exist over the range 0.2 ≤ x ≤ 0.33. However, phases with variable x hare also known, and in some cases, x > 0.5.
Another class of LDH is known where the main metal layer consists of Li+ and Al3+ cations, with the general formula
where X6− represents one or more anions with total charge −6. The value of y is usually between 0.5 and 4.
In some cases, the pH value of the solution used during the synthesis and the high drying temperature of the LDH can eliminate the presence of the OH− groups in the LDH. For example, in the synthesis of the 42CO3 compound, a low pH value of the aqueous solution or higher annealing temperature of solid can induce the formation of 2CO3, which is thermodynamically more stable than the LDH compound, by exchanging OH− groups by CO32- groups.

Applications

The anions located in the interlayer regions can be replaced easily, in general. A wide variety of anions may be incorporated, ranging from simple inorganic anions through organic anions to complex biomolecules, including DNA. This has led to an intense interest in the use of LDH intercalates for advanced applications. Drug molecules such as ibuprofen may be intercalated; the resulting nanocomposites have potential for use in controlled release systems, which could reduce the frequency of doses of medication needed to treat a disorder. Further effort has been expended on the intercalation of agrochemicals, such as the chlorophenoxyacetates, and important organic synthons, such as terephthalate and nitrophenols. Agrochemical intercalates are of interest because of the potential to use LDHs to remove agrochemicals from polluted water, reducing the likelihood of eutrophication.
LDHs exhibit shape-selective intercalation properties. For instance, treating LiAl2-Cl with a 50:50 mixture of terephthalate and phthalate results in intercalation of the 1,4-isomer with almost 100% preference. The selective intercalation of ions such as benzenedicarboxylates and nitrophenols has importance because these are produced in isomeric mixtures from crude oil residues, and it is often desirable to isolate a single form, for instance in the production of polymers.
LDH-TiO2 intercalates are used in suspensions for self-cleaning of surfaces, because of photo-catalytic properties of TiO2 and good compatibility of LDHs with inorganic materials.

Minerals

Naturally occurring examples of LDH are classified as members of the hydrotalcite supergroup, named after the Mg-Al carbonate hydrotalcite, which is the longest-known example of a natural LDH phase. More than 40 mineral species are known to fall within this supergroup. The dominant divalent cations, M2+, that have been reported in hydrotalcite supergroup minerals are: Mg, Ca, Mn, Fe, Ni, Cu and Zn; the dominant trivalent cations, M3+, are: Al, Mn, Fe, Co and Ni. The most common intercalated anions are 2−, 2− and Cl−; OH−, S2− and − have also been reported. Some species contain intercalated cationic or neutral complexes such as + or 0. The International Mineralogical Association's 2012 report on hydrotalcite supergroup nomenclature defines eight groups within the supergroup on the basis of a combination of criteria. These groups are:
  1. the hydrotalcite group, with M2+:M3+ = 3:1 ;
  2. the quintinite group, with M2+:M3+ = 2:1 ;
  3. the fougèrite group of natural 'green rust' phases, with M2+ = Fe2+, M3+ = Fe3+ in a range of ratios, and with O2− replacing OH− in the brucite module to maintain charge balance ;
  4. the woodwardite group, with variable M2+:M3+ and interlayer 2−, leading to an expanded layer spacing of ~8.9 Å;
  5. the cualstibite group, with interlayer − and a layer spacing of ~9.7 Å;
  6. the glaucocerinite group, with interlayer 2− as in the woodwardite group, and with additional interlayer H2O molecules that further expand the layer spacing to ~11 Å;
  7. the wermlandite group, with a layer spacing of ~11 Å, in which cationic complexes occur with anions between the brucite-like layers; and
  8. the hydrocalumite group, with M2+ = Ca2+ and M3+ = Al, which contains brucite-like layers in which the Ca:Al ratio is 2:1 and the large cation, Ca2+, is coordinated to a seventh ligand of ‘interlayer’ water.
The IMA Report also presents a concise systematic nomenclature for synthetic LDH phases that are not eligible for a mineral name. This uses the prefix LDH, and characterises components by the numbers of the octahedral cation species in the chemical formula, the interlayer anion, and the Ramsdell polytype symbol. For example, the 3R polytype of Mg6Al212.4H2O is described by "LDH 6Mg2Al·CO3-3R". This simplified nomenclature does not capture all the possible types of structural complexity in LDH materials. Elsewhere, the Report discusses examples of:
  1. long-range order of different cations within a brucite-like layer, which may produce sharp superstructure peaks in diffraction patterns and a and b periodicities that are multiples of the basic 3 Å repeat, or short-range order producing diffuse scattering;
  2. the wide variety of c periodicities that can occur due to relative displacements or rotations of the brucite-like layers, producing multiple polytypes with the same compositions, intergrowths of polytypes and variable degrees of stacking disorder;
  3. different periodicities arising from order of different interlayer species, either within an interlayer or by alternation of different anion types from interlayer to interlayer.

    Citations