Leaded copper


Leaded copper is a metal alloy of copper with lead. A small amount of lead makes the copper easier to machine. Alloys with a larger amount of lead are used for bearings. Brass and bronze alloys of copper may have lead added and are then also sometimes referred to as leaded copper alloys. Leaded copper and its alloys have been used since ancient times.

Applications

Leaded copper alloys are used to make electrical connectors and mechanical bearings, especially in the automotive industry where high performance and reliability are required. Mechanical bearings can have high lead content. Such high lead content alloys are unsuitable for welding or brazing.

Machined alloys

Alloys with around 2-4% lead are used for machined copper applications, where the lead content lubricates the copper and makes it easier to machine. These include high-quality electrical connectors where a high current capacity and low electrical resistance are required. Such connectors are used in industrial automation and the automotive industry. Brasses may also be leaded for the same reason.

Cast and sintered alloys

High-strength casting copper alloys typically contain less than 2% lead. Bearing alloys are often cast or sintered onto a steel backing. Softer alloys with a higher lead content are also used, for example in bushes where conformance to the opposite bearing surface is important.
Some casting alloys have over 20% lead content but, due to their toxicity, they are no longer used.

Toxicity

When lead alloys wear, lead is released into the environment. Lead is a heavy metal toxin and in recent times the use of leaded copper alloys has been reduced.

History

Signs of leaded copper use are found in the manufacture of ancient Egyptian faience. By 1500 BC leaded copper could be found across the Old World from East Asia to Africa and Europe.