Linkage disequilibrium


In population genetics, linkage disequilibrium is the non-random association of alleles at different loci in a given population. Loci are said to be in linkage disequilibrium when the frequency of association of their different alleles is higher or lower than what would be expected if the loci were independent and associated randomly.
Linkage disequilibrium is influenced by many factors, including selection, the rate of genetic recombination, mutation rate, genetic drift, the system of mating, population structure, and genetic linkage. As a result, the pattern of linkage disequilibrium in a genome is a powerful signal of the population genetic processes that are structuring it.
In spite of its name, linkage disequilibrium may exist between alleles at different loci without any genetic linkage between them and independently of whether or not allele frequencies are in equilibrium. Furthermore, linkage disequilibrium is sometimes referred to as gametic phase disequilibrium; however, the concept also applies to asexual organisms and therefore does not depend on the presence of gametes.

Formal definition

Suppose that among the gametes that are formed in a sexually reproducing population, allele A occurs with frequency at one locus, while at a different locus allele B occurs with frequency. Similarly, let be the frequency with which both A and B occur together in the same gamete.
The association between the alleles A and B can be regarded as completely random—which is known in statistics as independence—when the occurrence of one does not affect the occurrence of the other, in which case the probability that both A and B occur together is given by the product of the probabilities. There is said to be a linkage disequilibrium between the two alleles whenever differs from for any reason.
The level of linkage disequilibrium between A and B can be quantified by the coefficient of linkage disequilibrium, which is defined as
provided that both and are greater than zero.
Linkage disequilibrium corresponds to. In the case we have and the alleles A and B are said to be in linkage equilibrium. The subscript "AB" on emphasizes that linkage disequilibrium is a property of the pair of alleles and not of their respective loci. Other pairs of alleles at those same two loci may have different coefficients of linkage disequilibrium.
Linkage disequilibrium in asexual populations can be defined in a similar way in terms of population allele frequencies. Furthermore, it is also possible to define linkage disequilibrium among three or more alleles, however these higher-order associations are not commonly used in practice.

Measures derived from D

The coefficient of linkage disequilibrium is not always a convenient measure of linkage disequilibrium because its range of possible values depends on the frequencies of the alleles it refers to. This makes it difficult to compare the level of linkage disequilibrium between different pairs of alleles.
Lewontin suggested normalising D by dividing it by the theoretical maximum difference between the observed and expected haplotype frequencies as follows:
where
An alternative to is the correlation coefficient between pairs of loci, expressed as

Example: Two-loci and two-alleles

Consider the haplotypes for two loci A and B with two alleles each—a two-loci, two-allele model. Then the following table defines the frequencies of each combination:
Note that these are relative frequencies. One can use the above frequencies to determine the frequency of each of the alleles:
If the two loci and the alleles are independent from each other, then one can express the observation as " is found and is found". The table above lists the frequencies for,, and for,, hence the frequency of is, and according to the rules of elementary statistics.
The deviation of the observed frequency of a haplotype from the expected is a quantity called the linkage disequilibrium and is commonly denoted by a capital D:
The following table illustrates the relationship between the haplotype frequencies and allele frequencies and D.
Total
-
-
Total

Role of recombination

In the absence of evolutionary forces other than random mating, Mendelian segregation, random chromosomal assortment, and chromosomal crossover,
the linkage disequilibrium measure converges to zero along the time axis at a rate
depending on the magnitude of the recombination rate between the two loci.
Using the notation above,, we can demonstrate this convergence to zero
as follows. In the next generation,, the frequency of the haplotype, becomes
This follows because a fraction of the haplotypes in the offspring have not
recombined, and are thus copies of a random haplotype in their parents. A fraction of those are. A fraction
have recombined these two loci. If the parents result from random mating, the probability of the
copy at locus having allele is and the probability
of the copy at locus having allele is, and as these copies are initially in the two different gametes that formed the diploid genotype, these are independent events so that the probabilities can be multiplied.
This formula can be rewritten as
so that
where at the -th generation is designated as. Thus we have
If, then so that converges to zero.
If at some time we observe linkage disequilibrium, it will disappear in the future due to recombination. However, the smaller the distance between the two loci, the smaller will be the rate of convergence of to zero.

Example: Human leukocyte antigen (HLA) alleles

constitutes a group of cell surface antigens also known as the MHC of humans. Because HLA genes are located at adjacent loci on the particular region of a chromosome and presumed to exhibit epistasis with each other or with other genes, a sizable fraction of alleles are in linkage disequilibrium.
An example of such linkage disequilibrium is between HLA-A1 and B8 alleles in unrelated Danes referred to by Vogel and Motulsky.
Because HLA is codominant and HLA expression is only tested locus by locus in surveys, LD measure is to be estimated from such a 2×2 table to the right.
expression frequency of antigen :
expression frequency of antigen :
frequency of gene, given that individuals with '+/−', '+/+', and '−/+' genotypes are all positive for antigen :
and
Denoting the '―' alleles at antigen i to be x, and at antigen j to be y, the observed frequency of haplotype xy is
and the estimated frequency of haplotype xy is
Then LD measure is expressed as
Standard errors are obtained as follows:
Then, if
exceeds 2 in its absolute value, the magnitude of is statistically significantly large. For data in Table 1 it is 20.9, thus existence of statistically significant LD between A1 and B8 in the population is admitted.
HLA-A alleles iHLA-B alleles j
A1B80.06516.0
A3B70.03910.3
A2Bw400.0134.4
A2Bw150.013.4
A1Bw170.0145.4
A2B180.0062.2
A2Bw35−0.009−2.3
A29B120.0136.0
A10Bw160.0135.9

Table 2 shows some of the combinations of HLA-A and B alleles where significant LD was observed among pan-Europeans.
Vogel and Motulsky argued how long would it take that linkage disequilibrium between loci of HLA-A and B disappeared. Recombination between loci of HLA-A and B was considered to be of the order of magnitude 0.008. We will argue similarly to Vogel and Motulsky below. In case LD measure was observed to be 0.003 in pan-Europeans in the list of Mittal it is mostly non-significant. If had reduced from 0.07 to 0.003 under recombination effect as shown by, then. Suppose a generation took 25 years, this means 10,000 years. The time span seems rather short in the history of humans. Thus observed linkage disequilibrium between HLA-A and B loci might indicate some sort of interactive selection.
The presence of linkage disequilibrium between an HLA locus and a presumed major gene of disease susceptibility corresponds to any of the following phenomena:
Relative risk
Relative risk of an HLA allele for a disease is approximated by the odds ratio in the 2×2 association table of the allele with the disease. Table 3 shows association of HLA-B27 with ankylosing spondylitis among a Dutch population. Relative risk of this allele is approximated by
Woolf's method is applied to see if there is statistical significance. Let
and
Then
follows the chi-square distribution with. In the data of Table 3, a significant association exists at the 0.1% level. Haldane's modification applies to the case when either of is zero, where and are replaced with
and
respectively.
DiseaseHLA alleleRelative risk FAD FAP
Ankylosing spondylitisB27909080.89
Reactive arthritisB27407080.67
Spondylitis in inflammatory bowel diseaseB27105080.46
Rheumatoid arthritisDR4670300.57
Systemic lupus erythematosusDR3345200.31
Multiple sclerosisDR2460200.5
Diabetes mellitus type 1DR4675300.64

In Table 4, some examples of association between HLA alleles and diseases are presented.
Allele frequency excess among patients over controls
Even high relative risks between HLA alleles and the diseases were observed, only the magnitude of relative risk would not be able to determine the strength of association. value is expressed by
where and are HLA allele frequencies among patients and healthy populations, respectively. In Table 4, column was added in this quotation. Putting aside 2 diseases with high relative risks both of which are also with high values, among other diseases, juvenile diabetes mellitus has a strong association with DR4 even with a low relative risk.
Discrepancies from expected values from marginal frequencies in 2×2 association table of HLA alleles and disease
This can be confirmed by test calculating
where. For data with small sample size, such as no marginal total is greater than 15, one should utilize Yates's correction for continuity or Fisher's exact test.

Resources

A comparison of different measures of LD is provided by Devlin & Risch
The International HapMap Project enables the study of LD in human populations . The Ensembl project integrates HapMap data with other genetic information from dbSNP.

Analysis software