The following is a list of AMDCPU microarchitectures.
Nomenclature
Historically, AMD's CPU families were given a "K-number" starting with their first internal x86CPU design, the K5, to represent generational changes. AMD has not used K-nomenclature codenames in official AMD documents and press releases since the beginning of 2005, when K8 described the Athlon 64 processor family. AMD now refers to the codename K8 processors as the Family 0Fh processors. 10h and 0Fh refer to the main result of the CPUID x86 processor instruction. In hexadecimal numbering, 0F equals the decimal number 15, and 10 equals the decimal number 16. The Family hexadecimal identifier number can be determined for a particular processor using the freewaresystem profiling application CPU-Z, which shows the Family number in the Ext. Family field of the application, as can be seen on various screenshots on the website.
x86 microarchitectures
Below is a list of microarchitectures many of which have codenames associated:
AMD K5 – AMD's first original x86 microarchitecture. The K5 was based on the AMD Am29k micro architecture with the addition of an x86 decoder. Although the design was similar in idea to a Pentium Pro, the actual performance was more like that of a Pentium.
AMD K6 – the K6 was not based on the K5 and was instead based on the Nx686 processor that was being designed by NexGen when that company was bought by AMD. The K6 was generally pin-compatible with the Intel Pentium.
* AMD K6-2 – an improved K6 with the addition of the 3DNow!SIMD instructions.
* AMD K6-III Sharptooth – a further improved K6 with three levels of cache – 64 KB L1, 256 KB full-speed on-die L2, and a variable L3.
AMD K7 Athlon – microarchitecture of the AMD Athlon classic and Athlon XPmicroprocessors. Was a very advanced design for its day. First generation was built with a separate L2-cache chip on a board inserted into a slot and introduced extended MMX. The second generation returned to the traditional socket form factor with fully integrated L2-cache running at full speed. The third generation, branded as XP, introduced full support for SSE.
AMD K8 Hammer – also known as AMD Family 0Fh. Based on the K7 but was designed around a 64-bit ISA, added an integrated memory controller, HyperTransport communication fabric, L2 cache sizes up to 1 MB, and SSE2. Later K8 added SSE3. The K8 was the first mainstream Windows-compatible 64-bit microprocessor and was released April 22, 2003. K8 replaced the traditional front side bus with a HyperTransport communication fabric. SledgeHammer was the first design which implemented it.
AMD K9 – unfinished successor to K8. The codename was recycled at least once until ultimately being dropped before any public mention of it.
AMD FusionFamily 12h – based on the 10h/K10 design. Includes CPU cores, GPU and Northbridge in the same chip. Llano was the first design which implemented it. Fusion was later re-branded as the APU.
AMD Bobcat Family 14h – a new distinct line, which is aimed in the 1 W to 10 W low power microprocessor category. Ontario and Zacate were the first designs which implemented it.
* AMD Jaguar Family 16h – the successor to Bobcat. Kabini and Temash. CPUID model numbers are 00h-0Fh.
* AMD Puma Family 16h – the successor to Jaguar. Beema and Mullins. CPUID model numbers are 30h-3Fh.
AMD Bulldozer Family 15h – the successor to 10h/K10. Bulldozer is designed for processors in the 10 to 220W category, implementing XOP, FMA4 and CVT16 instruction sets. Orochi was the first design which implemented it. For Bulldozer, CPUID model numbers are 00h and 01h.
* AMD Piledriver Family 15h – second generation Bulldozer. CPUID model numbers are 02h and 10h-1Fh.
* AMD Steamroller Family 15h – third-generation Bulldozer. CPUID model numbers are 30h-3Fh.
* AMD Excavator Family 15h – fourth-generation Bulldozer. CPUID model numbers are 60h-6Fh, later updated revisions have model numbers 70h-7Fh.
AMD Zen – the successor to Bulldozer. First AMD architecture to implement simultaneous multithreading and Infinity Fabric. Based on 14 nm process, Included in the Ryzen CPU line.
* AMD Zen+ – second generation Zen architecture
* AMD Zen 2 – successor to the Zen and Zen+ architectures based on 7 nm process.
* AMD Zen 3 – new architecture in the 7+ nm process, successor to the Zen 2 architecture scheduled for Q3 in 2020.
* AMD Zen 4 – successor to the Zen 3 architecture, planned in 5 nm
