List of ASTM International standards
This is a list of ASTM International standards.
Standard designations usually consist of a letter prefix and a sequentially assigned number. This may optionally be followed by a dash and the last two digits of the year in which the standard was adopted. Prefix letters correspond to the following subjects:
- A = Iron and Steel Materials
- B = Nonferrous Metal Materials
- C = Ceramic, Concrete, and Masonry Materials
- D = Miscellaneous Materials
- E = Miscellaneous Subjects
- F = Materials for Specific Applications
- G = Corrosion, Deterioration, and Degradation of Materials
A
B
- B1-01 Standard Specification for Hard-Drawn Copper Wire
- B2-08 Standard Specification for Medium-Hard-Drawn Copper Wire
- B3-01 Standard Specification for Soft or Annealed Copper Wire
- B5-00 Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes
- B6-08 Standard Specification for Zinc
- B8-04 Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
- B9-90 Standard Specification for Bronze Trolley Wire
- B16/B16M-05 Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
- B19-05 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
- B21/B21M-06 Standard Specification for Naval Brass Rod, Bar, and Shapes
- B22-08 Standard Specification for Bronze Castings for Bridges and Turntables
- B23-00 Standard Specification for White Metal Bearing Alloys
- B26/B26M-05 Standard Specification for Aluminum-Alloy Sand Castings
- B29-03 Standard Specification for Refined Lead
- B30-09 Standard Specification for Copper Alloys in Ingot Form
- B30-08a Standard Specification for Copper Alloys in Ingot Form CHINESE TRANSLATION
- B32-08 Standard Specification for Solder Metal
- B33-04 Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes
- B36/B36M-08a Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar
- B37-08 Standard Specification for Aluminum for Use in Iron and Steel Manufacture
- B39-79 Standard Specification for Nickel
- B42-02e1 Standard Specification for Seamless Copper Pipe, Standard Sizes
- B43-98 Standard Specification for Seamless Red Brass Pipe, Standard Sizes
- B47-95a Standard Specification for Copper Trolley Wire
- B48-00e1 Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
- B49-08a Standard Specification for Copper Rod Drawing Stock for Electrical Purposes
- B61-08 Standard Specification for Steam or Valve Bronze Castings
- B62-09 Standard Specification for Composition Bronze or Ounce Metal Castings
- B63-07 Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
- B66/B66M-06e1 Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts
- B67-05 Standard Specification for Car and Tender Journal Bearings, Lined
- B68-02 Standard Specification for Seamless Copper Tube, Bright Annealed
- B68M-99 Standard Specification for Seamless Copper Tube, Bright Annealed
- B69-08 Standard Specification for Rolled Zinc
- B70-90 Standard Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating
- B75-02 Standard Specification for Seamless Copper Tube
- B75M-99 Standard Specification for Seamless Copper Tube
- B76-90 Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
- B77-07 Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys
- B78-90 Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
- B80-07 Standard Specification for Magnesium-Alloy Sand Castings
- B84-07 Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
- B85/B85M-08 Standard Specification for Aluminum-Alloy Die Castings
- B86-08 Standard Specification for Zinc and Zinc-Aluminum Alloy Foundry and Die Castings
- B88-03 Standard Specification for Seamless Copper Water Tube
- B88M-05 Standard Specification for Seamless Copper Water Tube
- B90/B90M-07 Standard Specification for Magnesium-Alloy Sheet and Plate
- B91-07 Standard Specification for Magnesium-Alloy Forgings
- B92/B92M-07 Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting
- B93/B93M-07 Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
- B94-07 Standard Specification for Magnesium-Alloy Die Castings
- B96/B96M-06 Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
- B98/B98M-08 Standard Specification for Copper-Silicon Alloy Rod, Bar and Shapes
- B99/B99M-06 Standard Specification for Copper-Silicon Alloy Wire for General Applications
- B100-08 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
- B101-07 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
- B102-00 Standard Specification for Lead- and Tin-Alloy Die Castings
- B103/B103M-09 Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar
- B105-05 Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors
- B106-08 Standard Test Methods for Flexivity of Thermostat Metals
- B107/B107M-07 Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire
- B108/B108M-08 Standard Specification for Aluminum-Alloy Permanent Mold Castings
- B111/B111M-09 Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
- B114-07 Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
- B115-00 Standard Specification for Electrolytic Copper Cathode
- B116-95 Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage
- B117 Standard Practice for Operating Salt Spray Apparatus
- B121/B121M-01 Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
- B122/B122M-08 Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy, and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
- B124/B124M-08a Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
- B127-05 Standard Specification for Nickel-Copper Alloy Plate, Sheet, and Strip
- B129-07 Standard Specification for Cartridge Brass Cartridge Case Cups
- B130-08 Standard Specification for Commercial Bronze Strip for Bullet Jackets
- B131-07 Standard Specification for Copper Alloy Bullet Jacket Cups
- B134/B134M-08 Standard Specification for Brass Wire
- B135-08a Standard Specification for Seamless Brass Tube
- B135M-08a Standard Specification for Seamless Brass Tube
- B136-84e1 Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
- B137-95 Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
- B138/B138M-06 Standard Specification for Manganese Bronze Rod, Bar, and Shapes
- B139/B139M-07 Standard Specification for Phosphor Bronze Rod, Bar, and Shapes
- B140/B140M-07 Standard Specification for Copper-Zinc-Lead Rod, Bar, and Shapes
- B148-97e1 Standard Specification for Aluminum-Bronze Sand Castings
- B150/B150M-08 Standard Specification for Aluminum Bronze Rod, Bar, and Shapes
- B151/B151M-05 Standard Specification for Copper-Nickel-Zinc Alloy and Copper-Nickel Rod and Bar
- B152/B152M-06ae1 Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
- B153-05 Standard Test Method for Expansion of Copper and Copper-Alloy Pipe and Tubing
- B154-05 Standard Test Method for Mercurous Nitrate Test for Copper Alloys
- B159/B159M-05 Standard Specification for Phosphor Bronze Wire
- B160-05e1 Standard Specification for Nickel Rod and Bar
- B161-05e1 Standard Specification for Nickel Seamless Pipe and Tube
- B162-99e1 Standard Specification for Nickel Plate, Sheet, and Strip
- B163-08 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
- B164-03 Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire
- B165-05 Standard Specification for Nickel-Copper Alloy * Seamless Pipe and Tube
- B166-08 Standard Specification for Nickel-Chromium-Iron Alloys * and Nickel-Chromium-Cobalt-Molybdenum Alloy Rod, Bar, and Wire
- B167-08 Standard Specification for Nickel-Chromium-Iron Alloys * and Nickel-Chromium-Cobalt-Molybdenum Alloy Seamless Pipe and Tube
- B168-08 Standard Specification for Nickel-Chromium-Iron Alloys and Nickel-Chromium-Cobalt-Molybdenum Alloy Plate, Sheet, and Strip
- B169/B169M-05 Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
- B170-99 Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes
- B171/B171M-09 Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
- B172-01ae1 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
- B173-01ae1 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors
- B174-02e1 Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
- B176-08 Standard Specification for Copper-Alloy Die Castings
- B177-01e1 Standard Guide for Engineering Chromium Electroplating
- B179-06 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
- B183-79e1 Standard Practice for Preparation of Low-Carbon Steel for Electroplating
- B187/B187M-06 Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes
- B188-02 Standard Specification for Seamless Copper Bus Pipe and Tube
- B189-05 Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes
- B193-02 Standard Test Method for Resistivity of Electrical Conductor Materials
- B194-08 Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
- B196/B196M-07 Standard Specification for Copper-Beryllium Alloy Rod and Bar
- B197/B197M-07 Standard Specification for Copper-Beryllium Alloy Wire
- B199-07 Standard Specification for Magnesium-Alloy Permanent Mold Castings
- B200-85 Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys
- B201-80 Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces
- B206/B206M-07 Standard Specification for Copper-Nickel-Zinc Wire and Copper-Nickel Alloy Wire
- B208-06 Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings
- B208-06 Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings CHINESE TRANSLATION
- B209-07 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
- B209M-07 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
- B210-04 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
- B210M-05 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
- B211-03 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire
- B211M-03 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire
- B212-99 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
- B213-03 Standard Test Method for Flow Rate of Metal Powders
- B214-07 Standard Test Method for Sieve Analysis of Metal Powders
- B215-08 Standard Practices for Sampling Metal Powders
- B216-97 Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes
- B221M-07 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
- B221-08 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
- B223-08 Standard Test Method for Modulus of Elasticity of Thermostat Metals
- B224-04 Standard Classification of Coppers
- B226-04 Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors
- B227-04 Standard Specification for Hard-Drawn Copper-Clad Steel Wire
- B228-04 Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
- B229-04 Standard Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors
- B230/B230M-07 Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes
- B231/B231M-04 Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
- B232/B232M-01e1 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced
- B233-97 Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
- B234-04 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers
- B234M-04 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers
- B236M-07 Standard Specification for Aluminum Bars for Electrical Purposes
- B236-07 Standard Specification for Aluminum Bars for Electrical Purposes
- B237-01 Standard Specification for Refined Antimony
- B240-07e1 Standard Specification for Zinc and Zinc-Aluminum Alloys in Ingot Form for Foundry and Die Castings
- B241/B241M-02 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
- B242-99e1 Standard Guide for Preparation of High-Carbon Steel for Electroplating
- B243-09 Standard Terminology of Powder Metallurgy
- B244-09 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
- B246-05 Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes
- B247-02a Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
- B247M-02a Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
- B248-07 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
- B248M-07 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
- B249/B249M-06 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
- B250/B250M-07 Standard Specification for General Requirements for Wrought Copper Alloy Wire
- B251M-97 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
- B251-02e1 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
- B252-92 Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
- B253-87e1 Standard Guide for Preparation of Aluminum Alloys for Electroplating
- B254-92e1 Standard Practice for Preparation of and Electroplating on Stainless Steel
- B258-02 Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
- B263-04 Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
- B265-09a Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
- B267-07 Standard Specification for Wire for Use In Wire-Wound Resistors
- B271-08 Standard Specification for Copper-Base Alloy Centrifugal Castings
- B272-07 Standard Specification for Copper Flat Products with Finished Edges
- B275-05 Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought
- B276-05e1 Standard Test Method for Apparent Porosity in Cemented Carbides
- B277-95 Standard Test Method for Hardness of Electrical Contact Materials
- B279-04 Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
- B280-08 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
- B281-88 Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings
- B283-09 Standard Specification for Copper and Copper-Alloy Die Forgings
- B286-07 Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
- B294-92 Standard Test Method for Hardness Testing of Cemented Carbides
- B296-03 Standard Practice for Temper Designations of Magnesium Alloys, Cast and Wrought
- B298-07 Standard Specification for Silver-Coated Soft or Annealed Copper Wire
- B299-08 Standard Specification for Titanium Sponge
- B301/B301M-08 Standard Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes
- B302-07 Standard Specification for Threadless Copper Pipe, Standard Sizes
- B306-09 Standard Specification for Copper Drainage Tube
- B308/B308M-02 Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
- B311-08 Standard Test Method for Density of Powder Metallurgy Materials Containing Less Than Two Percent Porosity
- B312-96 Standard Test Method for Green Strength for Compacted Metal Powder Specimens
- B313/B313M-02e1 Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes
- B315-06 Standard Specification for Seamless Copper Alloy Pipe and Tube
- B316/B316M-02 Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
- B317/B317M-07 Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes
- B319-91 Standard Guide for Preparation of Lead and Lead Alloys for Electroplating
- B320-60 Standard Practice for Preparation of Iron Castings for Electroplating
- B322-99 Standard Guide for Cleaning Metals Prior to Electroplating
- B324-01 Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
- B327-09 Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
- B328-96e1 Standard Test Method for Density, Oil Content, and Interconnected Porosity of Sintered Metal Structural Parts and Oil-Impregnated Bearings
- B329-06 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
- B330-07 Standard Test Method for Fisher Number of Metal Powders and Related Compounds
- B331-95 Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
- B333-03 Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
- B335-03 Standard Specification for Nickel-Molybdenum Alloy Rod
- B338-09 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
- B339-00 Standard Specification for Pig Tin
- B343-92ae1 Standard Practice for Preparation of Nickel for Electroplating with Nickel
- B344-01 Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements
- B345/B345M-02 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems
- B348-09 Standard Specification for Titanium and Titanium Alloy Bars and Billets
- B349/B349M-09 Standard Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application
- B350/B350M-02 Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application
- B351/B351M-08e1 Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application
- B352/B352M-02 Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application
- B353-07 Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service
- B354-05 Standard Terminology Relating to Uninsulated Metallic Electrical Conductors
- B355-06 Standard Specification for Nickel-Coated Soft or Annealed Copper Wire
- B359/B359M-02 Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
- B360-01 Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications
- B361-08 Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
- B362-91 Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
- B363-06a Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
- B364-96 Standard Specification for Tantalum and Tantalum Alloy Ingots
- B365-98 Standard Specification for Tantalum and Tantalum Alloy Rod and Wire
- B366-04be1 Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
- B367-09 Standard Specification for Titanium and Titanium Alloy Castings
- B368-09 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray Testing
- B369-09 Standard Specification for Copper-Nickel Alloy Castings
- B370-09 Standard Specification for Copper Sheet and Strip for Building Construction
- B371/B371M-08 Standard Specification for Copper-Zinc-Silicon Alloy Rod
- B372-97 Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube
- B373-00 Standard Specification for Aluminum Foil for Capacitors
- B374-06 Standard Terminology Relating to Electroplating
- B379-04 Standard Specification for Phosphorized Coppers—Refinery Shapes
- B380-97e1 Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
- B381-09 Standard Specification for Titanium and Titanium Alloy Forgings
- B386-03 Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil
- B387-90 Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire
- B388-06 Standard Specification for Thermostat Metal Sheet and Strip
- B389-81 Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
- B390-92 Standard Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides
- B391-03 Standard Specification for Niobium and Niobium Alloy Ingots
- B392-03 Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire
- B393-05 Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate
- B394-03 Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
- B395/B395M-08 Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
- B398/B398M-02 Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes
- B399/B399M-04 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors
- B400-08 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors
- B401-04 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced
- B403-07 Standard Specification for Magnesium-Alloy Investment Castings
- B406-96 Standard Test Method for Transverse Rupture Strength of Cemented Carbides
- B407-08a Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
- B408-06 Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar
- B409-06e1 Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
- B411/B411M-08 Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar
- B413-97a Standard Specification for Refined Silver
- B415-98 Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire
- B416-98 Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors
- B417-00e1 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
- B418-08 Standard Specification for Cast and Wrought Galvanic Zinc Anodes
- B422-08a Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip
- B423-05 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy * Seamless Pipe and Tube
- B424-05 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy * Plate, Sheet, and Strip
- B425-99 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy Rod and Bar
- B427-02 Standard Specification for Gear Bronze Alloy Castings
- B428-09 Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube
- B429/B429M-06 Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
- B430-97e1 Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry
- B432-09 Standard Specification for Copper and Copper Alloy Clad Steel Plate
- B434-06 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys * Plate, Sheet, and Strip
- B435-06 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip
- B438-08 Standard Specification for Bronze-Base Powder Metallurgy Bearings
- B439-08 Standard Specification for Iron-Base Powder Metallurgy Bearings
- B440-00 Standard Specification for Cadmium
- B441-04 Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar
- B443-00 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy and Nickel-Chromium-Molybdenum-Silicon Alloy * Plate, Sheet, and Strip
- B444-06 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys and Nickel-Chromium-Molybdenum-Silicon Alloy Pipe and Tube
- B446-03 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy, Nickel-Chromium-Molybdenum-Silicon Alloy, and Nickel-Chromium-Molybdenum-Tungsten Alloy * Rod and Bar
- B447-07 Standard Specification for Welded Copper Tube
- B449-93 Standard Specification for Chromates on Aluminum
- B452-02 Standard Specification for Copper-Clad Steel Wire for Electronic Application
- B453/B453M-08 Standard Specification for Copper-Zinc-Lead Alloy Rod, Bar, and Shapes
- B455-05 Standard Specification for Copper-Zinc-Lead Alloy Extruded Shapes
- B456-03 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium
- B457-67e1 Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
- B462-06 Specification for Forged or Rolled UNS N06030,N06022,N06035,N06200,N06059,N06686,N08020,N08024,N08026,N08367,N10276,N10665, N10675,N10629, N08031,N06045, N06025, & R20033 Alloy Pipe Flanges, Forged Fitting, & Values & Parts for Corrosive
- B463-04 Standard Specification for UNS N08020, UNS N08026, and UNS N08024 Alloy Plate, Sheet, and Strip
- B464-05 Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Pipe
- B465-04 Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
- B466/B466M-07 Standard Specification for Seamless Copper-Nickel Pipe and Tube
- B467-88 Standard Specification for Welded Copper-Nickel Pipe
- B468-04 Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Tubes
- B470-02 Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
- B472-04a Standard Specification for Nickel Alloy Billets and Bars for Reforging
- B473-07 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
- B474-03 Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe
- B475-07 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire
- B476-01 Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials
- B477-97 Standard Specification for Gold-Silver-Nickel Electrical Contact Alloy
- B478-85 Standard Test Method for Cross Curvature of Thermostat Metals
- B479-06 Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications
- B480-88 Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating
- B481-68 Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating
- B482-85 Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating
- B483/B483M-03 Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Pipe for General Purpose Applications
- B487-85 Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section
- B488-01 Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses
- B489-85e1 Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
- B490-09 Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits
- B491/B491M-06 Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
- B493/B493M-08 Standard Specification for Zirconium and Zirconium Alloy Forgings
- B494/B494M-08 Standard Specification for Primary Zirconium
- B495-05 Standard Specification for Zirconium and Zirconium Alloy Ingots
- B496-04 Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
- B497-00 Standard Guide for Measuring Voltage Drop on Closed Arcing Contacts
- B498/B498M-08 Standard Specification for Zinc-Coated Steel Core Wire for Use in Overhead Electrical Conductors
- B499-09 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
- B500/B500M-09 Standard Specification for Metallic Coated Stranded Steel Core for Use in Overhead Electrical Conductors
- B501-04 Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application
- B502-02 Standard Specification for Aluminum-Clad Steel Core Wire for Aluminum Conductors, Aluminum-Clad Steel Reinforced
- B504-90 Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
- B505/B505M-08a Standard Specification for Copper Alloy Continuous Castings
- B506-09 Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction
- B507-86e1 Standard Practice for Design of Articles to Be Electroplated on Racks
- B508-08 Standard Specification for Copper Alloy Strip for Flexible Metal Hose
- B511-01 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes
- B512-04 Standard Specification for Nickel-Chromium-Silicon Alloy Billets and Bars
- B514-05 Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe
- B515-95 Standard Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes
- B516-03 Standard Specification for Welded Nickel-Chromium-Iron Alloy Pipe
- B520-93 Standard Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application
- B521-98 Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes
- B522-01 Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy
- B523/B523M-07 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
- B524/B524M-99 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced
- B527-06 Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds
- B528-05 Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens
- B530-02 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
- B532-85 Standard Specification for Appearance of Electroplated Plastic Surfaces
- B533-85 Standard Test Method for Peel Strength of Metal Electroplated Plastics
- B534-07 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
- B535-06 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys Seamless Pipe and Tube
- B536-07 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys Plate, Sheet, and Strip
- B537-70 Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure
- B539-02 Standard Test Methods for Measuring Resistance of Electrical Connections
- B540-97 Standard Specification for Palladium Electrical Contact Alloy
- B541-01 Standard Specification for Gold Electrical Contact Alloy
- B542-07 Standard Terminology Relating to Electrical Contacts and Their Use
- B543-07e1 Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
- B545-97e1 Standard Specification for Electrodeposited Coatings of Tin
- B546-04 Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy, Ni-Fe-Cr-Si Alloys, Ni-Cr-Fe-Al Alloy, Ni-Cr-Fe Alloy, and Ni-Cr-Fe-Si Alloy Pipe
- B547/B547M-02 Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube
- B548-03 Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
- B549-04 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced
- B550/B550M-07 Standard Specification for Zirconium and Zirconium Alloy Bar and Wire
- B551/B551M-07 Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
- B552-08 Standard Specification for Seamless and Welded Copper–Nickel Tubes for Water Desalting Plants
- B555-86 Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test
- B556-90 Standard Guide for Measurement of Thin Chromium Coatings by Spot Test
- B557-06 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
- B557M-07e1 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
- B558-79 Standard Practice for Preparation of Nickel Alloys for Electroplating
- B559-93 Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application
- B560-00 Standard Specification for Modern Pewter Alloys
- B561-94 Standard Specification for Refined Platinum
- B562-95 Standard Specification for Refined Gold
- B563-01 Standard Specification for Palladium-Silver-Copper Electrical Contact Alloy
- B564-06a Standard Specification for Nickel Alloy Forgings
- B565-04 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
- B566-04a Standard Specification for Copper-Clad Aluminum Wire
- B567-98 Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
- B568-98 Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
- B569-09 Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing
- B570-06 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions
- B571-97e1 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
- B572-06 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod
- B573-06 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys * Rod
- B574-06e1 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
- B575-06 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Plate, Sheet, and Strip
- B576-94 Standard Guide for Arc Erosion Testing of Electrical Contact Materials
- B577-93e1 Standard Test Methods for Detection of Cuprous Oxide in Copper
- B578-87 Standard Test Method for Microhardness of Electroplated Coatings
- B579-73 Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy
- B580-79 Standard Specification for Anodic Oxide Coatings on Aluminum
- B581-02 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
- B582-07 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
- B584-08a Standard Specification for Copper Alloy Sand Castings for General Applications
- B584-08a Standard Specification for Copper Alloy Sand Castings for General Applications CHINESE TRANSLATION
- B587-08 Standard Specification for Welded Brass Tube
- B588-88 Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique
- B589-94 Standard Specification for Refined Palladium
- B591-09 Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar
- B592-01 Standard Specification for Copper-Zinc-aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
- B593-96e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
- B594-06 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications
- B595-95 Standard Specification for Sintered Aluminum Structural Parts
- B596-89 Standard Specification for Gold-Copper Alloy Electrical Contact Material
- B598-09 Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys
- B599-92e1 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy Plate, Sheet, and Strip
- B600-91e1 Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
- B601-07 Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast
- B602-88 Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings
- B603-07 Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
- B604-91 Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
- B605-95a Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy
- B606-08 Standard Specification for High-Strength Zinc-Coated Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
- B607-91 Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use
- B608-07 Standard Specification for Welded Copper-Alloy Pipe
- B609/B609M-99 Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
- B610-08 Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders
- B611-85 Standard Test Method for Abrasive Wear Resistance of Cemented Carbides
- B613-76 Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts
- B614-05 Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
- B615-79 Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
- B616-96 Standard Specification for Refined Rhodium
- B617-98 Standard Specification for Coin Silver Electrical Contact Alloy
- B618/B618M-08 Standard Specification for Aluminum-Alloy Investment Castings
- B619-06 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
- B620-03 Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy Plate, Sheet, and Strip
- B621-02 Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy Rod
- B622-06 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
- B624-07 Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application
- B625-05 Standard Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, and UNS R20033 Plate, Sheet, and Strip
- B626-06 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube
- B628-98 Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy
- B629-77 Standard Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating
- B630-88 Standard Practice for Preparation of Chromium for Electroplating with Chromium
- B631-93 Standard Specification for Silver-Tungsten Electrical Contact Materials
- B632/B632M-08 Standard Specification for Aluminum-Alloy Rolled Tread Plate
- B633-07 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
- B634-88e1 Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use
- B635-00e1 Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited
- B636-84e1 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
- B637-06e1 Standard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service
- B639-02 Standard Specification for Precipitation Hardening Cobalt-Containing Alloys Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
- B640-07 Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service
- B643-00 Standard Specification for Copper-Beryllium Alloy Seamless Tube
- B644-05 Standard Specification for Copper Alloy Addition Agents
- B645-07 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
- B646-06a Standard Practice for Fracture Toughness Testing of Aluminum Alloys
- B647-84 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
- B648-78 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
- B649-06 Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys, and Cr-Ni-Fe-N Low-Carbon Alloy Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy Wire
- B650-95 Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
- B651-83 Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
- B652/B652M-04 Standard Specification for Niobium-Hafnium Alloy Ingots
- B653/B653M-06 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings
- B654/B654M-04 Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
- B655/B655M-04 Standard Specification for Niobium-Hafnium Alloy Bar, Rod, and Wire
- B657-05 Guide for Metallographic Identification of Microstructure in Cemented Carbides
- B658/B658M-06 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
- B659-90e1 Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings
- B660-08 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
- B661-06 Standard Practice for Heat Treatment of Magnesium Alloys
- B662-94 Standard Specification for Silver-Molybdenum Electrical Contact Material
- B663-94 Standard Specification for Silver-Tungsten Carbide Electrical Contact Material
- B664-90 Standard Specification for 80% Silver-20 % Graphite Sliding Contact Material
- B665-08 Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
- B666/B666M-08 Standard Practice for Identification Marking of Aluminum and Magnesium Products
- B667-97 Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
- B668-05 Standard Specification for UNS N08028 Seamless Pipe and Tube
- B670-07 Standard Specification for Precipitation-Hardening Nickel Alloy Plate, Sheet, and Strip for High-Temperature Service
- B671-81 Standard Specification for Refined Iridium
- B672-02 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy Bar and Wire
- B673-05e1 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe
- B674-05 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube
- B675-02 Standard Specification for UNS N08367 Welded Pipe
- B676-03 Standard Specification for UNS N08367 Welded Tube
- B677-05 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube
- B678-86 Standard Test Method for Solderability of Metallic-Coated Products
- B679-98e1 Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use
- B680-80 Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
- B682-01 Standard Specification for Standard Metric Sizes of Electrical Conductors
- B683-01 Standard Specification for Pure Palladium Electrical Contact Material
- B684-97 Standard Specification for Platinum-Iridium Electrical Contact Materials
- B685-01 Standard Specification for Palladium-Copper Electrical Contact Material
- B686/B686M-08 Standard Specification for Aluminum Alloy Castings, High-Strength
- B687-99e1 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
- B688-96 Standard Specification for Chromium-Nickel-Molybdenum-Iron Plate, Sheet, and Strip
- B689-97 Standard Specification for Electroplated Engineering Nickel Coatings
- B690-02 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys Seamless Pipe and Tube
- B691-02 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys Rod, Bar, and Wire
- B692-90 Standard Specification for 75% Silver-25 % Graphite Sliding Contact Material
- B693-91 Standard Specification for Silver-Nickel Electrical Contact Materials
- B694-03 Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze, Copper-Clad Stainless Steel, and Copper-Clad Alloy Steel Sheet and Strip for Electrical Cable Shielding
- B695-04 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
- B696-00e1 Standard Specification for Coatings of Cadmium Mechanically Deposited
- B697-88 Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings
- B698-02 Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube
- B699-86 Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
- B700-08 Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
- B701/B701M-06 Standard Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced
- B702-93 Standard Specification for Copper-Tungsten Electrical Contact Material
- B703-05 Standard Test Method for Apparent Density of Powders Using Arnold Meter
- B704-03 Standard Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes
- B705-05 Standard Specification for Nickel-Alloy Welded Pipe
- B706-00 Standard Specification for Seamless Copper Alloy Pipe and Tube
- B708-05 Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip
- B709-04 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy * Plate, Sheet, and Strip
- B710-04 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe
- B711-05 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced
- B712-93 Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials
- B715-96 Standard Specification for Sintered Copper Structural Parts for Electrical Conductivity Applications
- B717-96 Standard Specification for Refined Ruthenium
- B718-00 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Plate, Sheet, and Strip
- B719-00 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Bar
- B722-06 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Seamless Pipe and Tube
- B723-00 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Welded Pipe
- B724-00 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument
- B725-05 Standard Specification for Welded Nickel and Nickel Copper Alloy Pipe
- B726-02 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Welded Tube
- B727-04 Standard Practice for Preparation of Plastics Materials for Electroplating
- B729-05 Standard Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and Tube
- B730-08 Standard Specification for Welded Nickel and Nickel Copper Alloy Tube
- B731-96 Standard Specification for 60% Palladium-40 % Silver Electrical Contact Material
- B733-04 Standard Specification for Autocatalytic Nickel-Phosphorus Coatings on Metal
- B734-97 Standard Specification for Electrodeposited Copper for Engineering Uses
- B735-06 Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
- B736-00 Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock
- B737-05 Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire
- B738-03 Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors
- B739-03 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube
- B740-02 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip
- B742-90 Standard Specification for Fine Silver Electrical Contact Fabricated Material
- B743-06 Standard Specification for Seamless Copper Tube in Coils
- B744/B744M-05 Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
- B745/B745M-97 Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
- B746/B746M-02 Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
- B747-07 Standard Specification for Copper-Zirconium Alloy Sheet and Strip
- B748-90 Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
- B749-03 Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
- B750-08 Standard Specification for Galfan Alloy in Ingot Form for Hot-Dip Coatings
- B751-08 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube
- B752-06 Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application
- B753-07 Standard Specification for Thermostat Component Alloys
- B754-89 Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip
- B755-00 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys Plate, Sheet, and Strip
- B756-00 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy Rod and Bar
- B757-00 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys Welded Pipe
- B758-00 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys Welded Tube
- B759-00 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys Pipe and Tube
- B760-07 Standard Specification for Tungsten Plate, Sheet, and Foil
- B761-06 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
- B762-90 Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings
- B763-08a Standard Specification for Copper Alloy Sand Castings for Valve Applications
- B764-04 Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit
- B765-03 Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
- B766-86 Standard Specification for Electrodeposited Coatings of Cadmium
- B767-88 Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
- B768-99 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet
- B769-07 Standard Test Method for Shear Testing of Aluminum Alloys
- B770-08 Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications
- B771-87 Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
- B772-97 Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials
- B773-96 Standard Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies
- B774-00e1 Standard Specification for Low Melting Point Alloys
- B775-08 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe
- B776-07 Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate
- B777-07 Standard Specification for Tungsten Base, High-Density Metal
- B778-02 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors
- B779-03 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced
- B780-98 Standard Specification for 75% Silver, 24.5% Copper, 0.5% Nickel Electrical Contact Alloy
- B781-93a Standard Guide for Silver-Cadmium Oxide Contact Material
- B783-04 Standard Specification for Materials for Ferrous Powder Metallurgy Structural Parts
- B784-01 Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables
- B786-08 Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation
- B787/B787M-04 Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation
- B788/B788M-04 Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
- B789/B789M-99 Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
- B790/B790M-00 Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
- B792-08 Standard Specification for Zinc Alloys in Ingot Form for Slush Casting
- B793-08 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
- B794-97 Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
- B795-07 Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged Steel Materials
- B796-07 Standard Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging Applications
- B797-93 Standard Test Method for Surface Finger Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged Steel Parts
- B798-95 Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
- B799-95 Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
- B800-05 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers
- B801-07 Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
- B802/B802M-08 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced
- B803-08 Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
- B804-02 Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
- B805-06 Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire
- B806-08a Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
- B806-08a Standard Specification for Copper Alloy Permanent Mold Castings for General Applications CHINESE TRANSLATION
- B807/B807M-06 Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
- B808-05 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
- B809-95 Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
- B811-02 Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
- B812-96 Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
- B813-00 Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
- B814-06 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy Plate, Sheet, and Strip
- B815-02 Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy Rod
- B816-00e1 Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited
- B817-08 Standard Specification for Powder Metallurgy Titanium Alloy Structural Components
- B818-03 Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy Plate, Sheet and Strip
- B819-00 Standard Specification for Seamless Copper Tube for Medical Gas Systems
- B820-09 Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
- B821-02 Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis
- B822-02 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
- B823-01 Standard Specification for Materials for Nonferrous Powder Metallurgy Structural Parts
- B824-09 Standard Specification for General Requirements for Copper Alloy Castings
- B824-04 Standard Specification for General Requirements for Copper Alloy Castings CHINESE TRANSLATION
- B825-02 Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
- B826-03 Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
- B827-05 Standard Practice for Conducting Mixed Flowing Gas Environmental Tests
- B828-02 Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
- B829-04a Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
- B830-97 Standard Specification for Uniform Test Methods and Frequency
- B831-05 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
- B832-93 Standard Guide for Electroforming with Nickel and Copper
- B833-06 Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying for the Corrosion Protection of Steel
- B834-95 Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum and Nickel-Chromium-Molybdenum-Columbium Alloy Pipe Flanges, Fittings, Valves, and Parts
- B835-04 Standard Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction
- B836-00 Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction
- B837-01 Standard Specification for Seamless Copper Tube for Natural Gas and Liquefied Petroleum Gas Fuel Distribution Systems
- B839-04 Standard Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod—Inclined Wedge Method
- B840-99 Standard Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits
- B841-99 Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits
- B842-99 Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits
- B843-07 Standard Specification for Magnesium Alloy Anodes for Cathodic Protection
- B844-98 Standard Guide for Silver-Tin Oxide Contact Material
- B845-97e1 Standard Guide for Mixed Flowing Gas Tests for Electrical Contacts
- B846-06a Standard Terminology for Copper and Copper Alloys
- B846-06a Standard Terminology for Copper and Copper Alloys CHINESE TRANSLATION
- B848-05 Specification for Powder Forged Ferrous Materials
- B849-02 Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
- B850-98 Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement
- B851-04 Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
- B852-08 Standard Specification for Continuous Galvanizing Grade Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel
- B853-07 Standard Specification for Powder Metallurgy Boron Stainless Steel Structural Components
- B854-98 Standard Guide for Measuring Electrical Contact Intermittences
- B855-06 Standard Test Method for Volumetric Flow Rate of Metal Powders Using Arnold Meter and Hall Funnel
- B856-03 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported
- B857-09 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported
- B858-06 Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys
- B859-03e1 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis
- B860-09 Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing
- B861-08a Standard Specification for Titanium and Titanium Alloy Seamless Pipe
- B862-09 Standard Specification for Titanium and Titanium Alloy Welded Pipe
- B863-09 Standard Specification for Titanium and Titanium Alloy Wire
- B864/B864M-08 Standard Specification for Corrugated Aluminum Box Culverts
- B865-04 Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy Bar, Rod, Wire, Forgings, and Forging Stock
- B866-95 Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion
- B867-95 Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use
- B868-96 Standard Practice for Contact Performance Classification of Electrical Connection Systems
- B869-07 Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire
- B870-08 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys
- B871-01 Standard Test Method for Tear Testing of Aluminum Alloy Products
- B872-06 Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip
- B873-01 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
- B874-96 Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process
- B875-96 Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process
- B877-96 Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid Method
- B878-97 Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors
- B879-97e1 Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys
- B880-03 Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
- B881-05 Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products
- B882-05 Specification for Pre-Patinated Copper for Architectural Applications
- B883-05 Standard Specification for Metal Injection Molding Ferrous Materials
- B884-05 Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
- B885-09 Standard Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts
- B886-03 Standard Test Method for Determination of Magnetic Saturation of Cemented Carbides
- B887-03e1 Standard Test Method for Determination of Coercivity of Cemented Carbides
- B888-08 Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts
- B890-07 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
- B891-98 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes With Integral Fins
- B892-03 Standard Specification for ACuZinc5 Alloy in Ingot Form for Die Castings
- B893-98 Standard Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications
- B894-03 Standard Specification for ACuZinc5 Alloy Die Castings
- B895-05 Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy Parts/Specimens by Immersion in a Sodium Chloride Solution
- B896-99 Standard Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials
- B897-03 Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo and Block Ingot
- B898-05e1 Standard Specification for Reactive and Refractory Metal Clad Plate
- B899-06 Standard Terminology Relating to Non-ferrous Metals and Alloys
- B900-04 Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies
- B901-04 Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction
- B902-04a Standard Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction
- B903-00 Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
- B904-00 Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding
- B905-00 Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test
- B906-02 Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
- B907-05 Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders
- B908-03 Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot
- B909-00 Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products
- B910/B910M-07 Standard Specification for Annealed Copper-Clad Steel Wire
- B911/B911M-05 Standard Specification for ACSR Twisted Pair Conductor
- B912-02e1 Standard Specification for Passivation of Stainless Steels Using Electropolishing
- B913-05 Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
- B914-03 Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel
- B915-01 Standard Test Method for Measuring Static Heat Resistance of Self-Cleaning Oven Coating
- B916-01 Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal
- B917/B917M-08 Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes
- B918/B918M-09 Standard Practice for Heat Treatment of Wrought Aluminum Alloys
- B919-01 Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement
- B920-01e1 Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution
- B921-08 Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys
- B922-02 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
- B923-02 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
- B924-02 Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins
- B925-08 Standard Practices for Production and Preparation of Powder Metallurgy Test Specimens
- B926-03 Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table
- B927/B927M-08a Standard Specification for Brass Rod, Bar, and Shapes
- B928/B928M-07 Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments
- B929-05 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar
- B930-03 Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides
- B931-09 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy Parts
- B932-04 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum-Gadolinium Alloy Plate, Sheet, and Strip
- B933-09 Standard Test Method for Microindentation Hardness of Powder Metallurgy Materials
- B934-04a Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy Parts Using Microindentation Hardness Measurements
- B935-05 Standard Guide for Steam Treatment of Ferrous Powder Metallurgy Materials
- B936-08 Standard Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar
- B937-04 Standard Specification for Copper-Beryllium Seamless Tube
- B938-04 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions
- B939-05 Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy Bearings and Structural Materials
- B940-05 Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces
- B941-05 Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes
- B942-05 Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations
- B943-05 Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications
- B944-06 Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube
- B945-06 Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers
- B946-06 Standard Test Method for Surface Finish of Powder Metallurgy Products
- B947-06 Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
- B949-08 Standard Specification for General Requirements for Zinc and Zinc Alloy Products
- B950-06 Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys
- B951-08 Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought
- B952-08 Standard Specification for Zinc Alloys in Ingot Form for Spin Casting
- B953-07 Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
- B954-07 Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry
- B955/B955M-08 Standard Specification for Aluminum-Alloy Centrifugal Castings
- B956-07e2 Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins
- B957-08 Standard Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated Steel Core Wire for Overhead Electrical Conductors
- B958-08 Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc–5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
- B960-08 Standard Specification for Prime Western Grade-Recycled Zinc
- B961-08 Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application
- B962-08 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy Products Using Archimedes' Principle
- B963-08 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Interconnected Porosity of Sintered Powder Metallurgy Products Using Archimedes' Principle
- B964-09 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
- B965-09 Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability
- B967/B967M-09 Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire
- B994/B994M-15 Standard Specification for Nickel-Cobalt Alloy Coating
C
- ASTM C31 Standard Practice for Making and Curing Concrete Test Specimens in the Field
- ASTM C33 Standard Test Method for Fine and coarse aggregates
- ASTM C39 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C91 Cement Standards and Concrete Standards
- ASTM C91 - 05 Standard Specification for Masonry Cement
- ASTM C150 Standard Specification for Portland Cement
- ASTM C309 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
- ASTM C595 pertains to blended hydraulic cements for both general and special applications, using slag or pozzolan, or both, with Portland cement or Portland cement clinker or slag with lime.
- ASTM C618 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
- ASTM C813-90 Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
- ASTM C857-14 Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
- ASTM C876 Standard Test Method for Half-Cell Potential of uncoated reinforcing steel in concrete
- ASTM C955 Standard Specification for Load-Bearing Steel Studs, Runners, and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases
- ASTM C1112 Standard Guide for Application of Radiation Monitors to the Control and Physical Security of Special Nuclear Material
- ASTM C1130-17 Standard Practice for Calibration of Thin Heat Flux Transducers
- ASTM C1155 Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data
- ASTM C1157 covers hydraulic cements for both general and special applications.
- ASTM C1202 Standard Test Method for Electrical Indication of Chloride's Ability to Resist Chloride Ion Penetration
- ASTM C1270 Standard Practice for Detection Sensitivity Mapping of In-Plant Walk-Through Metal Detectors
- ASTM C1271 Standard Test Method for X-Ray Spectrometric Analysis of Lime and Limestone
- ASTM C1321 - 04 Standard Practice for Installation and Use of Interior Radiation Control Coating Systems in Building Construction
- ASTM C0141 Standard Practice for In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducer
- ASTM C1349 Standard Specification for Architectural Flat Glass Clad Polycarbonate
D
- ASTM D4-86 Standard Test Method for Bitumen Content
- ASTM D5/D5M-19a Standard Test Method for Penetration of Bituminous Materials
- ASTM D6/D6M-95 Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds
- ASTM D8-19 Standard Terminology Relating to Materials for Roads and Pavements
- ASTM D9-12 Standard Terminology Relating to Wood and Wood-Based Products
- ASTM D16-19 Standard Terminology for Paint, Related Coatings, Materials, and Applications
- ASTM D20-03 Standard Test Method for Distillation of Road Tars
- ASTM D25-12 Standard Specification for Round Timber Piles
- ASTM D34-08 Standard Guide for Chemical Analysis of White Pigments
- ASTM D36/D36M-14e1 Standard Test Method for Softening Point of Bitumen
- ASTM D37 - Cannabis
- ASTM D41/D41M-11 Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing
- ASTM D43/D43M-00 Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing
- ASTM D49-83 Standard Test Methods of Chemical Analysis of Red Lead
- ASTM D50-90 Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese
- ASTM D56-16a Standard Test Method for Flash Point by Tag Closed Cup Tester
- ASTM D61-15 Standard Test Method for Softening Point of Pitches
- ASTM D69-19 Standard Test Methods for Friction Tapes
- ASTM D70-18a Standard Test Method for Density of Semi-Solid Asphalt Binder
- ASTM D71-94 Standard Test Method for Relative Density of Solid Pitch and Asphalt
- ASTM D75/D75M-19 Standard Practice for Sampling Aggregates
- ASTM D76/D76M-11 Standard Specification for Tensile Testing Machines for Textiles
- ASTM D79-86 Standard Specification for Zinc Oxide Pigments
- ASTM D81-87 Standard Specification for Basic Carbonate White Lead Pigment
- ASTM D83-84 Standard Specification for Red Lead Pigment
- ASTM D85-05 Standard Specification for Ochre Pigment
- ASTM D86-19 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
- ASTM D87-09 Standard Test Method for Melting Point of Petroleum Wax
- ASTM D88/D88M-07e1 Standard Test Method for Saybolt Viscosity
- ASTM D91-02 Standard Test Method for Precipitation Number of Lubricating Oils
- ASTM D92-18 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
- ASTM D93-19 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
- ASTM D94-07 Standard Test Methods for Saponification Number of Petroleum Products
- ASTM D95-13 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
- ASTM D97-17b Standard Test Method for Pour Point of Petroleum Products
- ASTM D98-15 Standard Specification for Calcium Chloride
- ASTM D113-17 Standard Test Method for Ductility of Asphalt Materials
- ASTM D115-17 Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation
- ASTM D116-86 Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications
- ASTM D117-18 Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Liquids
- ASTM D120-14a Standard Specification for Rubber Insulating Gloves
- ASTM D121-15 Standard Terminology of Coal and Coke
- ASTM D123-19 Standard Terminology Relating to Textiles
- ASTM D1250-19e1 Standard Guide for the Use of the Joint API and ASTM Adjunct for Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils: API MPMS Chapter 11.1 - See all versions
- ASTM D126-87 Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green
- ASTM D127-19 Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum
- ASTM D128-98 Standard Test Methods for Analysis of Lubricating Grease
- ASTM D129-18 Standard Test Method for Sulfur in Petroleum Products
- ASTM D130-19 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
- ASTM D139-16 Standard Test Method for Float Test for Bituminous Materials
- ASTM D140/D140M-16 Standard Practice for Sampling Asphalt Materials
- ASTM D143-14 Standard Test Methods for Small Clear Specimens of Timber
- ASTM D146/D146M-04e1 Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing
- ASTM D149-20 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
- ASTM D153-84 Standard Test Methods for Specific Gravity of Pigments
- ASTM D156-15 Standard Test Method for Saybolt Color of Petroleum Products
- ASTM D167-12a Standard Test Method for Apparent and True Specific Gravity and Porosity of Lump Coke
- ASTM D173/D173M-03 Standard Specification for Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing
- ASTM D178-19 Standard Specification for Rubber Insulating Matting
- ASTM D185-07 Standard Test Methods for Coarse Particles in Pigments
- ASTM D187-18 Standard Test Method for Burning Quality of Kerosene
- ASTM D189-06 Standard Test Method for Conradson Carbon Residue of Petroleum Products
- ASTM D197-19 Standard Test Method for Sampling and Fineness Test of Pulverized Coal
- ASTM D198-15 Standard Test Methods of Static Tests of Lumber in Structural Sizes
- ASTM D202-17 Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation
- ASTM D204-02 Standard Test Methods for Sewing Threads
- ASTM D209-81 Standard Specification for Lampblack Pigment
- ASTM D210-05 Standard Specification for Bone Black Pigment
- ASTM D211-67 Standard Specification for Chrome Yellow and Chrome Orange Pigments
- ASTM D217-19b Standard Test Methods for Cone Penetration of Lubricating Grease
- ASTM D226/D226M-17 Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing
- ASTM D227/D227M-03 Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing
- ASTM D228/D228M-19a Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
- ASTM D229-19e1 Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation
- ASTM D233-13 Standard Test Methods of Sampling and Testing Turpentine
- ASTM D235-02 Standard Specification for Mineral Spirits
- ASTM D240-19 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- ASTM D242/D242M-19 Standard Specification for Mineral Filler for Asphalt Mixtures
- ASTM D243/D243M-14 Standard Test Method for Residue of Specified Penetration
- ASTM D244-09 Standard Test Methods and Practices for Emulsified Asphalts
- ASTM D245-06 Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber
- ASTM D256 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
- ASTM D421 - 85 Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
- ASTM D422 - 63e2 Standard Test Method for Particle-Size Analysis of Soils
- ASTM D531 -00 Standard Test Method for Rubber Property-Pusey and Jones Indentation
- ASTM D543 Chemical Resistance
- ASTM D570 Water Absorption
- ASTM D638 Standard Test Method for Tensile Properties of Plastics
- ASTM D698 - 12e1 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort
- ASTM D854 - 14 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
- ASTM D880 Test Method for Impact Testing for Shipping Containers and Systems
- ASTM D1044 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion
- ASTM D1056 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber
- ASTM D1140 - 14 Standard Test Methods for Determining the Amount of Material Finer than 75-μm Sieve in Soils by Washing
- ASTM D1193 Standard Specification for Reagent Water
- ASTM D1457 Elongation
- ASTM D1556 / D1556M - 15 Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method
- ASTM D1557 - 12 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort
- ASTM D1708 Tensile Strength
- ASTM D1746 Standard Test Method for Transparency of Plastic Sheeting
- ASTM D1748-10 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet
- ASTM D1883 - 14 Standard Test Method for California Bearing Ratio of Laboratory-Compacted Soils
- ASTM D1894 Coefficient of Friction
- ASTM D1945 Standard Test Method for Analysis of Natural Gas By Gas Chromatography
- ASTM D2156 Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
- ASTM D2166 / D2166M - 13 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
- ASTM D2216 - 10 Standard Test Methods for Laboratory Determination of Water Content of Soil and Rock by Mass
- ASTM D2240 Hardness
- ASTM D2412 Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
- ASTM D2434-68 Standard Test Method for Permeability of Granular Soils
- ASTM D2435 / D2435M - 11 Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
- ASTM D2487 - 11 Standard Practice for Classification of Soils for Engineering Purposes
- ASTM D2488 - 09a Standard Practice for Description and Identification of Soils
- ASTM D2837 - 13e1 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
- ASTM D3039 / D3039M Standard Test Method for Tensile Properties for Polymer Matrix Composite Materials
- ASTM D3080 Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions
- ASTM D3740 - 12a Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
- ASTM D3786 Bursting strength for Knit fabric and non woven material
- ASTM D4123-82 Standard Test Method for Indirect Tension Test for Resilient Modulus of Bituminous Mixtures
- ASTM D4220 / D4220M - 14 Standard Practices for Preserving and Transporting Soil Samples
- ASTM D4236 - 94 Standard Practice for Labeling Art Materials for Chronic Health Hazards
- ASTM D4318 - 10e1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
- ASTM D4356 Standard Practice for Establishing Consistent Test Method Tolerances
- ASTM D5084 - 10 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
- ASTM D5116 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions From Indoor Materials/Products
- ASTM D5162-08 Standard Practice for Discontinuity Testing of Nonconductive Protective Coating on Metallic Substrates
- ASTM D5375 Standard Test Methods for Liner removal at High Speeds from Pressure-Sensitive Label Stock
- ASTM D5800 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
- ASTM D6252 Standard Test Method for Peel Adhesion of Pressure Sensitive Label Stocks at 90° Angle
- ASTM D6484 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
- ASTM D6712 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Solid Plastic Shapes
- ASTM D6751 Standard Specification for Biodiesel Fuel Blend Stock for Middle Distillate Fuels
- ASTM D6938 - 10 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods
- ASTM D6913 - 04e1 Standard Test Methods for Particle-Size Distribution of Soils Using Sieve Analysis
- ASTM D7240 Standard Practice for Leak Location using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique
- ASTM D7264-15 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
- ASTM D7298-06 Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
- ASTM D7483 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
- ASTM D7490 Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements
- ASTM D7547 Aviation fuel U91
- ASTM D7913 / D7913M Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
E
- ASTM E8 Standard Test Methods for Tension Testing of Metallic Materials.
- ASTM E18 Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
- ASTM E21 Test Methods for Elevated Temperature Tension Tests of Metallic Materials
- ASTM E31 Healthcare Informatics
- ASTM E45 Standard Test Methods for Determining the Inclusion Content of Steel
- ASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials
- ASTM E96 Standard Test Methods for Water Vapor Transmission of Materials
- ASTM E112 Test Methods for Determining Average Grain Size
- ASTM E119 Standard Test Methods for Fire Tests of Building Construction and Materials
- ASTM E139 Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
- ASTM E150 Practice for Conducting Creep and Creep-Rupture Tension Tests of Metallic Materials Under Conditions of Rapid Heating and Short Times
- ASTM E151 Practice for Tension Tests of Metallic Materials at Elevated Temperatures with Rapid Heating and Conventional or Rapid Strain Rates
- ASTM E155 Reference Radiographs for Inspection of Aluminum and Magnesium Castings
- ASTM E165 Standard Practice for Liquid Penetrant Examination
- ASTM E290 Standard Test Methods for Bend Testing of Material for Ductility
- ASTM E292 Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
- ASTM E328 Methods for Stress-Relaxation Tests for Materials and Structures
- ASTM E381 Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
- ASTM E407 Standard Practice for Microetching Metals and Alloys
- ASTM E446 Standard Reference Radiographs for Steel Castings Up to 2 in. in Thickness
- ASTM E460 Practice for Determining Effect of Packaging on Food and Beverage Products During Storage
- ASTM E566 Practice for Electromagnetic Sorting of Ferrous Metals
- ASTM E647 Test method for measurement of fatigue crack growth rates
- ASTM E691 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
- ASTM E779 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
- ASTM E903 Standard Test Method for Solar Absorbance, Reflectance and Transmittance of Materials Using Integrating Spheres
- ASTM E1155 Standard Test Method for Determining FF Flatness and FL Levelness Numbers, pertaining primarily to cast-in-place concrete floors
- ASTM E1169 Standard Guide for Conducting Ruggedness Tests
- ASTM E1316: "Standard Terminology for Nondestructive Examinations"
- ASTM E1417 Standard Practice for Liquid Penetrant Testing
- ASTM E1444 Standard Practice for Magnetic Particle Testing
- ASTM E1488 Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods
- ASTM E1527 Standard Practice for Environmental Site Assessments
- ASTM E1558 Standard Guide for Electrolytic Polishing of Metallographic Specimens
- ASTM E1714
- ASTM E1751 Standard Guide for Temperature Electromotive Force Tables for Non-Letter Designated Thermocouple Combinations
- ASTM E1870 Test Method for Odor and Taste Transfer from Polymeric Packaging Film
- ASTM E2369 Standard Specification for Continuity of Care Record
- ASTM E2395
- ASTM E2500 Standard Guide for Specification, Design, and Verification of Pharmaceutical and Biopharmaceutical Manufacturing Systems and Equipment
-
F
- ASTM F67 Standard Specification for Unalloyed Titanium, for Surgical Implant Applications
- ASTM F75 Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants
- ASTM F86 Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants
- ASTM F90 Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications
- ASTM F136 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI Alloy for Surgical Implant Applications
- ASTM F138 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants
- ASTM F139 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants
- ASTM F432 Standard Specification for Roof and Rock Bolts and Accessories
- ASTM F436 Standard Specification for Hardened Steel Washers
- ASTM F541 Standard Specification for Alloy Steel Eye Bolts
- ASTM F560 Standard Specification for Unalloyed Tantalum for Surgical Implant Applications
- ASTM F562 Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications
- ASTM F568M Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners. Withdrawn January 2012 due to ISO 898-1.
- ASTM F571 Standard Practice for Installation of Exit Devices in Security Areas
- ASTM F593 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
- ASTM F601 Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants
- ASTM F606 Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets
- ASTM F620 Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition
- ASTM F621 Standard Specification for Stainless Steel Forgings for Surgical Implants
- ASTM F626 Standard Specification for Fence Fittings
- ASTM F629 Standard Practice for Radiography of Cast Metallic Surgical Implants
- ASTM F688 Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants
- ASTM F756 Standard Practice for Assessment of Hemolytic Properties of Materials
- ASTM F792 Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
- ASTM F799 Standard Specification for Cobalt-28Chromium-6Molybdenum Alloy Forgings for Surgical Implants
- ASTM F876 Standard Specification for Crosslinked Polyethylene Tubing
- ASTM F877 Standard Specification for Crosslinked Polyethylene Hot- and Cold-Water Distribution Systems
- ASTM F883 Standard Performance Specification for Padlocks
- ASTM F899 Standard Specification for Wrought Stainless Steels for Surgical Instruments
- ASTM F961 Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants
- ASTM F963 Standard Consumer Safety Specification for Toy Safety
- ASTM F1058 Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire, Strip, and Strip Bar for Surgical Implant Applications
- ASTM F1091 Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire
- ASTM F1108 Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants
- ASTM F1295 Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications
- ASTM F1314 Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants
- ASTM F1350 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Surgical Fixation Wire
- ASTM F1377 Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants
- ASTM F1427 - 13 Standard Consumer Safety Specification for Bunk Beds
- ASTM F1450 Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities
- ASTM F1472 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications
- ASTM F1537 Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants
- ASTM F1575 Test Method for Determining Bending Yield Moment of Nails
- ASTM F1577 Standard Test Methods for Detention Locks for Swinging Doors
- ASTM F1580 Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants
- ASTM F1586 Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants
- ASTM F1592 Standard Test Methods for Detention Hollow Metal Vision Systems
- ASTM F1643 Standard Test Methods for Detention Sliding Door Locking Device Assembly
- ASTM F1667 Standard Specification for Driven Fasteners: Nails, Spikes and Staples
- ASTM F1713 Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications
- ASTM F1807 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene Tubing and SDR9 Polyethylene of Raised Temperature Tubing
- ASTM F1813 Standard Specification for Wrought Titanium–12 Molybdenum–6 Zirconium–2 Iron Alloy for Surgical Implant
- ASTM F1886 Standard Test Method for Determining Integrity of Seals for Flexible Packaging by Visual Inspection
- ASTM F1915 Standard Test Methods for Glazing for Detention Facilities
- ASTM F1929 Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
- ASTM F2005 Standard Terminology for Nickel-Titanium Shape Memory Alloys
- ASTM F2023 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene Pipe, Tubing and Systems to Hot Chlorinated Water
- ASTM F2043 Standard Classification for Bicycle Usage
- ASTM F2063 Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants
- ASTM F2066 Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications
- ASTM F2080 Standard Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene Pipe and SDR9 Polyethylene of Raised Temperature Pipe
- ASTM F2100 Standard Specification for Performance of Materials Used in Medical Face Masks medical face masks
- ASTM F2101 Standard Test Method for Evaluating the Bacterial Filtration Efficiency of Medical Face Mask
- ASTM F2146 Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications
- ASTM F2159 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene Tubing and SDR9 Polyethylene of Raised Temperature Tubing
- ASTM F2181 Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants
- ASTM F2229 Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants
- ASTM F2248 Standard Practice for Specifying an Equivalent 3-Second Duration Design Loading for Blast Resistant Glazing Fabricated with Laminated Glass
- ASTM F2257 Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants
- ASTM F2322 Standard Test Methods for Physical Assault on Vertical Fixed Barriers for Detention and Correctional Facilities
- ASTM F2348 Standard Performance Specification for Privacy Padlocks
- ASTM F2384 Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications
- ASTM F2412 Standard Test Methods for Foot Protection
- ASTM F2413 Standard Specification for Performance Requirements for Foot Protection
- ASTM F2527 Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants
- ASTM F2581 Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants
- ASTM F2633 Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants
- ASTM F2761 Essential safety requirements for equipment comprising the patient-centric integrated clinical environment — Part 1: General requirements and conceptual model
- ASTM F2885 Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications
- ASTM F2886 Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications
- ASTM F2895 Standard Practice for Digital Radiography of Cast Metallic Implants
- ASTM F2989 Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications
- ASTM F3046 Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy for Surgical Implant Applications
- ASTM F3125 Standard Specification for High Strength Structural Bolts, Steel and Alloy Steel, Heat Treated, 120 ksi and 150 ksi Minimum Tensile Strength, Inch and Metric Dimensions. This is a combination of previous specifications A325, A325M, A490, A490M, F1852, and F2280.
- ASTM F3159 Standard Safety Specification for Liquid Laundry Packets
- ASTM F3160 Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants
- ASTM F3273 Standard Specification for Wrought Molybdenum-47.5 Rhenium Alloy for Surgical Implants
G
- G1 Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens
- G2/G2M Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680 °F or in Steam at 750 °F
- G3 Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
- G4 Standard Guide for Conducting Corrosion Tests in Field Applications
- G5 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
- G6 Standard Test Method for Abrasion Resistance of Pipeline Coatings
- G7/G7M Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials
- G8 Standard Test Methods for Cathodic Disbonding of Pipeline Coatings
- G9 Standard Test Method for Water Penetration into Pipeline Coatings
- G10 Standard Test Method for Specific Bendability of Pipeline Coatings
- G11 Standard Test Method for Effects of Outdoor Weathering on Pipeline Coatings
- G12 Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel '
- G13/G13 Standard Test Method for Impact Resistance of Pipeline Coatings
- G14 Standard Test Method for Impact Resistance of Pipeline Coatings
- G15 Standard Terminology Relating to Corrosion and Corrosion Testing '
- G16 Standard Guide for Applying Statistics to Analysis of Corrosion Data
- G17 Standard Test Method for Penetration Resistance of Pipeline Coatings
- G18 Standard Test Method for Joints, Fittings, and Patches in Coated Pipelines
- G19 Standard Test Method for Disbonding Characteristics of Pipeline Coatings by Direct Soil Burial '
- G20 Standard Test Method for Chemical Resistance of Pipeline Coatings
- G21 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
- G24 Standard Practice for Conducting Exposures to Daylight Filtered Through Glass
- G28 Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys
- G29 Standard Practice for Determining Algal Resistance of Plastic Films
- G30 Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens
- G31 Standard Guide for Laboratory Immersion Corrosion Testing of Metals
- G32 Standard Test Method for Cavitation Erosion Using Vibratory Apparatus
- G33 Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
- G34 Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys
- G35 Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids
- G36 Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution
- G37 Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys
- G38 Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens
- G39 Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
- G40 Standard Terminology Relating to Wear and Erosion
- G41 Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment
- G42 Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures
- G44 Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5% Sodium Chloride Solution
- G46 Standard Guide for Examination and Evaluation of Pitting Corrosion
- G47 Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
- G48 Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
- G49 Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
- G50 Standard Practice for Conducting Atmospheric Corrosion Tests on Metals
- G51 Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing
- G52 Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater
- G55 Standard Test Method for Evaluating Pipeline Coating Patch Materials
- G56 Standard Test Method for Abrasiveness of Ink-Impregnated Fabric Printer Ribbons and Other Web Materials
- G57 Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
- G58 Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments
- G59 Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
- G60 Standard Practice for Conducting Cyclic Humidity Exposures
- G61 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
- G62 Standard Test Methods for Holiday Detection in Pipeline Coatings
- G63 Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service
- G64 Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys
- G65 Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus
- G66 Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys
- G67 Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid
- G69 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
- G70 Standard Test Method for Ring Bendability of Pipeline Coatings '
- G71 Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
- G72/G72M Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
- G73 Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus
- G74 Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact
- G75 Standard Test Method for Determination of Slurry Abrasivity and Slurry Abrasion Response of Materials
- G76 Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
- G77 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
- G78 Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments
- G80 Standard Test Method for Specific Cathodic Disbonding of Pipeline Coatings '
- G81 Standard Test Method for Jaw Crusher Gouging Abrasion Test
- G82 Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance
- G84 Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing
- G85 Standard Practice for Modified Salt Spray Testing
- G86 Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
- G87 Standard Practice for Conducting Moist SO2 Tests
- G88 Standard Guide for Designing Systems for Oxygen Service
- G90 Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight
- G91 Standard Practice for Monitoring Atmospheric SO2 Deposition Rate for Atmospheric Corrosivity Evaluation
- G92 Standard Practice for Characterization of Atmospheric Test Sites
- G93 Standard Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments
- G94 Standard Guide for Evaluating Metals for Oxygen Service
- G95 Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings
- G96 Standard Guide for Online Monitoring of Corrosion in Plant Equipment
- G97 Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
- G98 Standard Test Method for Galling Resistance of Materials
- G99 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
- G100 Standard Test Method for Conducting Cyclic Galvanostaircase Polarization
- G101 Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels
- G102 Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements
- G103 Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6% Sodium Chloride Solution
- G105 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
- G106 Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements
- G107 Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input
- G108 Standard Test Method for Electrochemical Reactivation for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
- G109 Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
- G110 Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution
- G111 Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
- G112 Standard Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys
- G113 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
- G114 Standard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service
- G115 Standard Guide for Measuring and Reporting Friction Coefficients
- G116 Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
- G117 Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests '
- G118 Standard Guide for Recommended Format of Wear Test Data Suitable for Databases '
- G119 Standard Guide for Determining Synergism Between Wear and Corrosion
- G120 Standard Practice for Determination of Soluble Residual Contamination in by Soxhlet Extraction
- G121 Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
- G122 Standard Test Method for Evaluating the Effectiveness of Cleaning Agents
- G123 Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution
- G124 Standard Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres
- G125 Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
- G126 Standard Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres
- G127 Standard Guide for the Selection of Cleaning Agents for Oxygen Systems
- G128/G128M Standard Guide for Control of Hazards and Risks in Oxygen Enriched Systems
- G129 Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking
- G130 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
- G131 Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques
- G132 Standard Test Method for Pin Abrasion Testing
- G133 Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear
- G134 Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
- G135 Standard Guide for Computerized Exchange of Corrosion Data for Metals
- G136 Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction
- G137 Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration
- G138 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
- G139 Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method
- G140 Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method
- G141 Standard Guide for Addressing Variability in Exposure Testing on Nonmetallic Materials
- G142 Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
- G143 Standard Test Method for Measurement of Web/Roller Friction Characteristics
- G144 Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
- G145 Standard Guide for Studying Fire Incidents in Oxygen Systems
- G146 Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service
- G147 Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
- G148 Standard Practice for Evaluation of Hydrogen Uptake, Permeation, and Transport in Metals by an Electrochemical Technique
- G150 Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels
- G151 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
- G152 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- G153 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- G154 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
- G155 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
- G156 Standard Practice for Selecting and Characterizing Weathering Reference Materials Used to Monitor Consistency of Conditions in an Exposure Test
- G157 Standard Guide for Evaluating the Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for the Chemical Process Industries
- G158 Standard Guide for Three Methods of Assessing Buried Steel Tanks
- G160 Standard Practice for Evaluating Microbial Susceptibility of Nonmetallic Materials by Laboratory Soil Burial
- G161 Standard Guide for Corrosion-Related Failure Analysis
- G162 Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils
- G163 Standard Guide for Digital Data Acquisition in Wear and Friction Measurements '
- G164 Standard Test Method for Determination of Surface Lubrication on Flexible Webs
- G165 Standard Practice for Determining Rail-to-Earth Resistance
- G166 Standard Guide for Statistical Analysis of Service Life Data
- G167 Standard Test Method for Calibration of a Pyranometer Using a Pyrheliometer
- G168 Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens
- G169 Standard Guide for Application of Basic Statistical Methods to Weathering Tests
- G170 Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory
- G171 Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
- G172 Standard Guide for Statistical Analysis of Accelerated Service Life Data
- G173 Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface
- G174 Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact
- G175 Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for Medical and Emergency Applications
- G176 Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test—Cumulative Wear Method
- G177 Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37° Tilted Surface
- G178 Standard Practice for Determining the Activation Spectrum of a Material Using the Sharp Cut-On Filter or Spectrographic Technique
- G179 Standard Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests
- G180 Standard Test Method for Initial Screening of Corrosion Inhibiting Admixtures for Steel in Concrete
- G181 Standard Practice for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions
- G182 Standard Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings
- G183 Standard Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers
- G184 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage
- G185 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode
- G186 Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys
- G187 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
- G188 Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys
- G189 Standard Guide for Laboratory Simulation of Corrosion Under Insulation
- G190 Standard Guide for Developing and Selecting Wear Tests
- G192 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
- G193 Standard Terminology and Acronyms Relating to Corrosion
- G194 Standard Test Method for Measuring Rolling Friction Characteristics of a Spherical Shape on a Flat Horizontal Plane
- G195 Standard Guide for Conducting Wear Tests Using a Rotary Platform, Double-Head Abraser
- G196 Standard Test Method for Galling Resistance of Material Couples
- G197 Standard Table for Reference Solar Spectral Distributions: Direct and Diffuse on 20° Tilted and Vertical Surfaces
- G199 Standard Guide for Electrochemical Noise Measurement
- G200 Standard Test Method for Measurement of Oxidation-Reduction Potential of Soil
- G201 Standard Practice for Conducting Exposures in Outdoor Glass-Covered Exposure Apparatus with Air Circulation
- G202 Standard Test Method for Using Atmospheric Pressure Rotating Cage
- G203 Standard Guide for Determining Friction Energy Dissipation in Reciprocating Tribosystems
- G204 Standard Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions
- G205 Standard Guide for Determining Emulsion Properties, Wetting Behavior, and Corrosion-Inhibitory Properties of Crude Oils
- G206 Standard Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests
- G207 Standard Test Method for Indoor Transfer of Calibration from Reference to Field Pyranometers
- G208 Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus
- G209 Standard Practice for Detecting mu-phase in Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys
- G210 Standard Practice for Operating the Severe Wastewater Analysis Testing Apparatus
- G211 Standard Test Method for Conducting Elevated Temperature Erosion Tests by Solid Particle Impingement Using Gas Jets
- G213 Standard Guide for Evaluating Uncertainty in Calibration and Field Measurements of Broadband Irradiance with Pyranometers and Pyrheliometers
- G214 Standard Test Method for Integration of Digital Spectral Data for Weathering and Durability Applications
- G215 Standard Guide for Electrode Potential Measurement
- G217 Standard Guide for Corrosion Monitoring in Laboratories and Plants with Coupled Multielectrode Array Sensor Method