List of British Standards
British Standards are the standards produced by BSI Group which is incorporated under a Royal Charter. The BSI Group produces British Standards under the authority of the Charter, which lays down as one of the BSI's objectives to:
Standards
- BS 0 A standard for standards specifies Development, Structure and Drafting of British Standards themselves.
- BS 1 Lists of Rolled Sections for Structural Purposes
- BS 2 Specification and Sections of Tramway Rails and Fishplates
- BS 3 Report on Influence of Gauge Length and Section of Test Bar on the Percentage of Elongation
- BS 4 Specification for Structural Steel Sections
- BS 5 Report on Locomotives for Indian Railways
- BS 6 Properties of Rolled Sections for Structural Purposes
- BS 7 Dimensions of Copper Conductors Insulated Annealed, for Electric Power and Light
- BS 8 Specification for Tubular Tramway Poles
- BS 9 Specification and Sections of Bull Head Railway Rails
- BS 10 Tables of Pipe Flanges
- BS 11 Specifications and Sections of Flat Bottom Railway Rails
- BS 12 Specification for Portland Cement
- BS 13 Specification for Structural Steel for Shipbuilding
- BS 14 Specification for Structural Steel for Marine Boilers
- BS 15 Specification for Structural Steel for Bridges, etc., and General Building Construction
- BS 16 Specification for telegraph material
- BS 17 Interim Report on Electrical Machinery
- BS 18 Forms of Tensile Test Pieces
- BS 19 Report on Temperature Experiments on Field Coils of Electrical Machines
- BS 20 Report on BS Screw Threads
- BS 21 Report on Pipe Threads for Iron or Steel Pipes and Tubes
- BS 22 Report on Effect of Temperature on Insulating Materials
- BS 23 Standards for Trolley Groove and Wire,
- BS 24 Specifications for Material used in the Construction of Standards for Railway Rolling Stock
- BS 25 Report on Errors in Workmanship Based on Measurements Carried Out for the Committee by the National Physical Laboratory
- BS 26 Second Report on Locomotives for Indian Railways
- BS 27 Report on Standard Systems of Limit Gauges for Running Fits
- BS 28 Report on Nuts, Bolt Heads and Spanners
- BS 29 Specification for Ingot Steel Forgings for Marine Purposes
- BS 30 Specification for Steel Castings for Marine Purposes
- BS 31 Specification for Steel Conduits for Electrical Wiring
- BS 32 Specification for Steel Bars for use in Automatic Machines
- BS 33 Carbon Filament Electric Lamps
- BS 34 Tables of BS Whitworth, BS Fine and BS Pipe Threads
- BS 35 Specification for Copper Alloy Bars for use in Automatic Machines
- BS 36 Report on British Standards for Electrical Machinery
- BS 37 Specification for Electricity Meters
- BS 38 Report on British Standards Systems for Limit Gauges for Screw Threads
- BS 39 Combined Report on BS Screw Threads
- BS 40 Specification for Spigot and Socket Cast Iron Low Pressure Heating Pipes
- BS 41 Specification for Spigot and Socket Cast Iron Flue or Smoke Pipes
- BS 42 Report on Reciprocating Steam Engines for Electrical Purposes
- BS 43 Specification for Charcoal Iron Lip-welded Boiler Tubes
- BS 44 Specification for Cast Iron Pipes for Hydraulic Power
- BS 45 Report on Dimensions for Sparking Plugs
- BS 46 Specification for Keys and Keyways
- BS 47 Steel Fishplates for Bullhead and Flat Bottom Railway Rails, Specification and Sections of
- BS 48 Specification for Wrought Iron of Smithing Quality for Shipbuilding
- BS 49 Specification for Ammeters and Voltmeters
- BS 50 Third Report on Locomotives for Indian Railways
- BS 51 Specification for Wrought Iron for use in Railway Rolling Stock
- BS 52 Specification for bayonet lamp-caps lampholders and B.C. adaptors
- BS 53 Specification for Cold Drawn Weldless Steel Boiler Tubes for Locomotive Boilers
- BS 54 Report on Screw Threads, Nuts and Bolt Heads for use in Automobile Construction
- BS 55 Report on Hard Drawn Copper and Bronze Wire
- BS 56 Definitions of Yield Point and Elastic Limit
- BS 57 Report on heads for Small Screws
- BS 58 Specification for Spigot and socket Cast Iron Soil Pipes
- BS 59 Specification for Spigot and Socket Cast Iron Waste and Ventilating Pipes
- BS 60 Report of Experiments on Tungsten Filament Glow Lamps
- BS 61 Specification for Copper Tubes and their Screw Threads
- BS 62 Screwing for Marine Boiler Stays,
- BS 63 Specification for Sizes of Broken Stone and Chippings
- BS 64 Specification for Fishbolts and Nuts for Railway Rails
- BS 65 Specification for Salt-Glazed Ware Pipes,
- BS 66 Specification for Copper-Alloy Three-Piece Unions
- BS 67 Specification for Two and Three-Plate Ceiling Roses
- BS 68 Method of Specifying the Resistance of Steel Conductor Rails
- BS 69 Report on Tungsten Filament Glow Lamps for Automobiles
- BS 70 Report on Pneumatic Tyre Rims for Automobiles, Motor Cycles and Cycles
- BS 71 Report on Dimensions of Wheel Rims and Tyre Bands for Solid Rubber Tyres for Automobiles
- BS 72 British Standardisation Rules for Electrical Machinery,
- BS 73 Specification for Two-Pin Wall Plugs and Sockets
- BS 74 Charging Plug and Socket, for Vehicles Propelled by Electric Secondary Batteries, Specification for
- BS 75 Steels for Automobiles, Specification for Wrought
- BS 76 Report of and Specifications for Tar and Pitch for Road Purposes
- BS 77 Specification. Voltages for a.c. transmission and distribution systems
- BS 78 Specification for Cast Iron Pipes and Special Castings for Water, Gas and Sewage
- BS 79 Report on Dimensions of Special Trackwork for Tramways
- BS 80 Magnetos for Automobile Purposes
- BS 81 Specification for Instrument Transformers
- BS 82 Specification for Starters for Electric Motors
- BS 83 Standard of Reference for Dope and Protective Covering for Aircraft
- BS 84 Report on Screw Threads, and their Tolerances
- BS 86 Report on Dimensions of Magnetos for Aircraft Purposes
- BS 87 Report on Dimensions for Airscrew Hubs
- BS 88 Specification for cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c. Originally titled: “Specification for Electric Cut-Outs ”
- BS 89 Specification for Indicating Ammeters, Voltmeters, Wattmeters, Frequency and Power-Factor Meters
- BS 90 Specification for Recording Ammeters, Voltmeters and Wattmeters
- BS 95 Tables of Corrections to Effective Diameter required to compensate Pitch and Angle Errors in Screw Threads of Whitworth Form
- BS 98 Specification for Goliath Lamp Caps and Lamp Holders
- BS 103 Specification for Falling Weight Testing Machines for Rails
- BS 104 Sections of Light Flat Bottom Railway Rails and Fishplates
- BS 105 Sections of Light and Heavy Bridge Type Railway Rails
- BS 107 Standard for Rolled Sections for Magnet Steel
- BS 196 for protected-type non-reversible plugs, socket-outlets cable-couplers and appliance-couplers with earthing contacts for single phase a.c. circuits up to 250 volts
- BS 308 a now deleted standard for engineering drawing conventions, having been absorbed into BS 8888.
- BS 317 for Hand-Shield and Side Entry Pattern Three-Pin Wall Plugs and Sockets
- BS 336 for fire hose couplings and ancillary equipment
- BS 372 for Side-entry wall plugs and sockets for domestic purposes
- BS 381 for colours used in identification, coding and other special purposes
- BS 476 for fire resistance of building materials / elements
- BS 499 Welding terms and symbols.
- BS 546 for Two-pole and earthing-pin plugs, socket-outlets and socket-outlet adaptors for AC circuits up to 250V
- BS 857 for safety glass for land transport
- BS 970 Specification for wrought steels for mechanical and allied engineering purposes
- BS 987C Camouflage Colours
- BS 1088 for marine plywood
- BS 1192 for Construction Drawing Practice. Part 5 concerns Guide for structuring and exchange of CAD data.
- BS 1361 for cartridge fuses for a.c. circuits in domestic and similar premises
- BS 1362 for cartridge fuses for BS 1363 power plugs
- BS 1363 for mains power plugs and sockets
- BS 1377 Methods of test for soils for civil engineering.
- BS 1572 Colours for Flat Finishes for Wall Decoration
- BS 1870 for safety footwear.
- BS 1881 Testing Concrete
- BS 1852 Specification for marking codes for resistors and capacitors
- BS 2660 Colours for building and decorative paints
- BS 2777 Specification for asbestos-cement cisterns
- BS 2979 Transliteration of Cyrillic and Greek Letters
- BS 3262 Hot-applied thermoplastic road marking materials
- BS 3299 for lined moulded industrial rubber boots.
- BS 3506 for unplasticized PVC pipe for industrial uses
- BS 3621 Thief resistant lock assembly. Key.
- BS 3943 Specification for plastics waste traps
- BS 3995 for industrial rubber boots.
- BS 4142 Methods for rating and assessing industrial and commercial sound
- BS 4293 for residual current-operated circuit-breakers
- BS 4343 for industrial electrical power connectors
- BS 4532 for snorkels and face masks
- BS 4573 Specification for 2-pin reversible plugs and shaver socket-outlets
- BS 4800 for paint colours used in building construction
- BS 4900 for vitreous enamel colours used in building construction
- BS 4901 for plastic colours used in building construction
- BS 4902 for sheet / tile floor covering colours used in building construction
- BS 4960 for weighing instruments for domestic cookery
- BS 4962 for plastics pipes and fittings for use as subsoil field drains
- BS 5145 Specification for lined industrial rubber boots.
- BS 5252 for colour-coordination in building construction
- BS 5400 for steel, concrete and composite bridges.
- BS 5499 for graphical symbols and signs in building construction; including shape, colour and layout
- BS 5544 for anti-bandit glazing
- BS 5750 for quality management, the ancestor of ISO 9000
- BS 5759 Specification for webbing load restraint assemblies for use in surface transport
- BS 5837 for protection of trees during construction work
- BS 5839 for fire detection and alarm systems for buildings
- BS 5930 for site investigations
- BS 5950 for structural steel
- BS 5993 for Cricket balls
- BS 6008 for preparation of a liquor of tea for use in sensory tests
- BS 6312 for telephone plugs and sockets
- BS 6651 code of practice for protection of structures against lightning; replaced by BS EN 62305 series.
- BS 6701 installation, operation and maintenance of telecommunications equipment and telecommunications cabling
- BS 6879 for British geocodes, a superset of
- BS 7430 code of practice for earthing
- BS 7671 Requirements for Electrical Installations, The IEE Wiring Regulations, produced by the IET.
- BS 7799 for information security, the ancestor of the ISO/IEC 27000 family of standards, including 27002
- BS 7901 for recovery vehicles and vehicle recovery equipment
- BS 7909 Code of practice for temporary electrical systems for entertainment and related purposes
- BS 7971 Elastomer Insulated Fire Resistant cables for fixed wiring in ships and on mobile and fixed offshore units
- BS 7919 Electric cables. Flexible cables rated up to 450/750V, for use with appliances and equipment intended for industrial and similar environments
- BS 7910 guide to methods for assessing the acceptability of flaws in metallic structures
- BS 7925 Software testing
- BS 7971 Protective clothing and equipment for use in violent situations and in training
- BS 8110 for structural concrete
- BS 8233 Guidance on sound insulation and noise reduction in buildings
- BS 8484 for the provision of lone worker device services
- BS 8485 for the characterization and remediation from ground gas in affected developments
- BS 8494 for detecting and measuring carbon dioxide in ambient air or extraction systems
- Travel adaptors compatible with UK plug and socket system.
- BS 8888 for engineering drawing and technical product specification
- BS 8900-1 Managing sustainable development of organizations.
- BS 8900-2 Managing sustainable development of organizations. Framework for assessment against BS 8900-1
- BS 9999 Fire safety in the design, management and use of buildings. Code of practice
- BS 15000 for IT Service Management,, now ISO/IEC 20000
- BS 3G 101 for general requirements for mechanical and electromechanical aircraft indicators
- BS 10008 best practice for the implementation and operation of electronic information management systems
- BS EN 12195 Load restraining on road vehicles.
- BS EN 60204 Safety of machinery
- BS EN 61184:2017 Bayonet lampholders, fourth edition.
- BS EN ISO 4210 – Cycles. Safety Requirements for Bicycles