List of International Organization for Standardization standards, 11000-11999

ISO 11000 – ISO 11999

• ISO/IEC 11002:2008 Information technology - Multipath management API
• ISO 11005:2010 Technical product documentation – Use of main documents
• ISO 11011:2013 Compressed air - Energy efficiency - Assessment
• ISO 11014:2009 Safety data sheet for chemical products - Content and order of sections
• ISO/IEC TR 11017:1998 Information technology - Framework for internationalization
• ISO 11040 Prefilled syringes
• * ISO 11040-1:2015 Part 1: Glass cylinders for dental local anaesthetic cartridges
• * ISO 11040-2:2011 Part 2: Plunger stoppers for dental local anaesthetic cartridges
• * ISO 11040-3:2012 Part 3: Seals for dental local anaesthetic cartridges
• * ISO 11040-4:2015 Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling
• * ISO 11040-5:2012 Part 5: Plunger stoppers for injectables
• * ISO 11040-6:2012 Part 6: Plastic barrels for injectables
• * ISO 11040-7:2015 Part 7: Packaging systems for sterilized subassembled syringes ready for filling
• * ISO 11040-8:2016 Part 8: Requirements and test methods for finished prefilled syringes
• ISO 11064 Ergonomic design of control centres
• * ISO 11064-1:2000 Principles for the design of control centres
• * ISO 11064-2:2000 Principles for the arrangement of control suites
• * ISO 11064-3:1999 Control room layout ISO 11064-3:1999/Cor 1:2002
• * ISO 11064-4:2013 Layout and dimensions of workstations
• * ISO 11064-5:2008 Displays and controls
• * ISO 11064-6:2005 Environmental requirements for control centres
• * ISO 11064-7:2006 Principles for the evaluation of control centres
• ISO/TR 11065:1992 Industrial automation glossary
• ISO 11067:2015 Intelligent transport systems – Curve speed warning systems – Performance requirements and test procedures
• ISO 11070:2014 Sterile single-use intravascular introducers, dilators and guidewires
• ISO/IEC 11072:1992 Information technology - Computer graphics - Computer Graphics Reference Model
• ISO/IEEE 11073 Health informatics - Point-of-care medical device communication
• ISO 11074:2015 Soil quality - Vocabulary
• ISO 11086:1996 Gas turbines - Vocabulary
• ISO 11091:1994 Construction drawings – Landscape drawing practice
• ISO 11095:1996 Linear calibration using reference materials
• ISO 11107:2009 Recreational diving services – Requirements for training programmes on enriched air nitrox diving
• ISO 11108:1996 Information and documentation - Archival paper - Requirements for permanence and durability
• ISO 11117:2008 Gas cylinders – Valve protection caps and valve guards – Design, construction and tests
• ISO 11120 Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing
• ISO 11121:2017 Recreational diving services – Requirements for introductory programmes to scuba diving
• ISO 11124 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives
• * ISO 11124-1:1993 Part 1: General introduction and classification
• * ISO 11124-2:1993 Part 2: Chilled-iron grit
• * ISO 11124-3:1993 Part 3: High-carbon cast-steel shot and grit
• * ISO 11124-4:1993 Part 4: Low-carbon cast-steel shot
• ISO 11125 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives
• * ISO 11125-1:1993 Part 1: Sampling
• * ISO 11125-2:1993 Part 2: Determination of particle size distribution
• * ISO 11125-3:1993 Part 3: Determination of hardness
• * ISO 11125-4:1993 Part 4: Determination of apparent density
• * ISO 11125-5:1993 Part 5: Determination of percentage defective particles and of microstructure
• * ISO 11125-6:1993 Part 6: Determination of foreign matter
• * ISO 11125-7:1993 Part 7: Determination of moisture
• ISO 11126 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives
• * ISO 11126-1:1993 Part 1: General introduction and classification
• * ISO 11126-3:1993 Part 3: Copper refinery slag
• * ISO 11126-4:1993 Part 4: Coal furnace slag
• * ISO 11126-5:1993 Part 5: Nickel refinery slag
• * ISO 11126-6:1993 Part 6: Iron furnace slag
• * ISO 11126-7:1995 Part 7: Fused aluminium oxide
• * ISO 11126-8:1993 Part 8: Olivine sand
• * ISO 11126-9:1999 Part 9: Staurolite
• * ISO 11126-10:2000 Part 10: Almandite garnet
• ISO 11127 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives
• * ISO 11127-1:2011 Part 1: Sampling
• * ISO 11127-2:2011 Part 2: Determination of particle size distribution
• * ISO 11127-3:2011 Part 3: Determination of apparent density
• * ISO 11127-4:2011 Part 4: Assessment of hardness by a glass slide test
• * ISO 11127-5:2011 Part 5: Determination of moisture
• * ISO 11127-6:2011 Part 6: Determination of water-soluble contaminants by conductivity measurement
• * ISO 11127-7:2011 Part 7: Determination of water-soluble chlorides
• ISO 11133:2014 Microbiology of food, animal feed and water – Preparation, production, storage and performance testing of culture media
• ISO 11135:2014 Sterilization of health-care products—Ethylene oxide—Requirements for the development, validation and routine control of a sterilization process for medical devices
• ISO 11137 Sterilization of health care products – Radiation
• ISO 11138 Sterilization of health care products - Biological indicators
• * ISO 11138-1:2017 Part 1: General requirements
• * ISO 11138-2:2017 Part 2: Biological indicators for ethylene oxide sterilization processes
• * ISO 11138-3:2017 Part 3: Biological indicators for moist heat sterilization processes
• * ISO 11138-4:2017 Part 4: Biological indicators for dry heat sterilization processes
• * ISO 11138-5:2017 Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes
• ISO/TS 11139:2006 Sterilization of health care products - Vocabulary
• ISO 11145:2016 Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols
• ISO 11146 Lasers and laser-related equipment – Test methods for laser beam widths, divergence angles and beam propagation ratios
• * ISO 11146-1:2005 Part 1: Stigmatic and simple astigmatic beams
• * ISO 11146-2:2005 Part 2: General astigmatic beams
• * ISO/TR 11146-3:2004 Part 3: Intrinsic and geometrical laser beam classification, propagation and details of test methods
• ISO 11151 Lasers and laser-related equipment – Standard optical components
• * ISO 11151-1:2015 Part 1: Components for the UV, visible and near-infrared spectral ranges
• * ISO 11151-2:2015 Part 2: Components for the infrared spectral range
• ISO 11156:2011 Packaging - Accessible design - General requirements
• ISO/IEC 11160 Information technology - Office equipment - Minimum information to be included in specification sheets - Printers
• * ISO/IEC 11160-1:1996 Part 1: Class 1 and Class 2 printers
• * ISO/IEC 11160-2:2013 Part 2: Class 3 and Class 4 printers
• ISO 11170:2003 Hydraulic fluid power – Filter elements – Sequence of tests for verifying performance characteristics
• ISO 11171:2010 Hydraulic fluid power – Calibration of automatic particle counters for liquids
• ISO/IEC 11172 Information technology – Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s
• ISO/IEC 11179 Information technology – Metadata registries
• ISO 11192:2005 Small craft - Graphical symbols
• ISO 11195:1995 Gas mixers for medical use – Stand-alone gas mixers
• ISO 11197:2016 Medical supply units
• ISO 11200:2014 Acoustics – Noise emitted by machinery and equipment – Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
• ISO 11201:2010 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
• ISO 11202:2010 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
• ISO 11203:1995 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
• ISO 11204:2010 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
• ISO 11205:2003 Acoustics – Noise emitted by machinery and equipment – Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity
• ISO/TR 11219:2012 Information and documentation - Qualitative conditions and basic statistics for library buildings - Space, function and design
• ISO 11224:2003 Textiles – Web formation and bonding in nonwovens – Vocabulary
• ISO 11238:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of regulated information on substances
• ISO 11239:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of regulated information on pharmaceutical dose forms, units of presentation, routes of administration and packaging
• ISO 11240:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of units of measurement
• ISO/TS 11251:2010 Nanotechnologies – Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry
• ISO 11252:2013 Lasers and laser-related equipment – Laser device – Minimum requirements for documentation
• ISO 11270:2014 Intelligent transport systems – Lane keeping assistance systems – Performance requirements and test procedures
• ISO 11290 Microbiology of the food chain - Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp.
• * ISO 11290-1:2017 Part 1: Detection method
• * ISO 11290-2:2017 Part 2: Enumeration method
• ISO/TS 11308:2011 Nanotechnologies – Characterization of single-wall carbon nanotubes using thermogravimetric analysis
• ISO 11318:2002 Cardiac defibrillators – Connector assembly DF-1 for implantable defibrillators – Dimensions and test requirements
• ISO/IEC 11319:1993 Information technology – 8 mm wide magnetic tape cartridge for information interchange – Helical scan recording
• ISO/IEC 11321:1992 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DATA/DAT format
• ISO 11323:2010 Iron ore and direct reduced iron – Vocabulary
• ISO/TR 11328:1994 Measurement of liquid flow in open channels – Equipment for the measurement of discharge under ice conditions
• ISO 11329:2001 Hydrometric determinations – Measurement of suspended sediment transport in tidal channels
• ISO 11357 Plastics – Differential scanning calorimetry
• * ISO 11357-1:2009 General principles
• * ISO 11357-2:2013 Determination of glass transition temperature and glass transition step height
• * ISO 11357-3:2011 Determination of temperature and enthalpy of melting and crystallization
• * ISO 11357-4:2005 Determination of specific heat capacity
• * ISO 11357-5:2013 Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
• * ISO 11357-6:2008 Determination of oxidation induction time and oxidation induction temperature
• * ISO 11357-7:2002 Determination of crystallization kinetics
• ISO/TR 11360:2010 Nanotechnologies – Methodology for the classification and categorization of nanomaterials
• ISO 11375:1998 Building construction machinery and equipment – Terms and definitions
• ISO 11380:1994 Optics and optical instruments – Ophthalmic optics – Formers
• ISO 11381:2016 Ophthalmic optics – Spectacle frames – Screw threads
• ISO 11400:1992 Nickel, ferronickel and nickel alloys - Determination of phosphorus content - Phosphovanadomolybdate molecular absorption spectrometric method
• ISO/IEC 11404:2007 Information technology – General-Purpose Datatypes
• ISO/IEC 11411:1995 Information technology - Representation for human communication of state transition of software
• ISO 11418 Containers and accessories for pharmaceutical preparations
• * ISO 11418-1:2016 Part 1: Drop-dispensing glass bottles
• * ISO 11418-2:2016 Part 2: Screw-neck glass bottles for syrups
• * ISO 11418-3:2016 Part 3: Screw-neck glass bottles for solid and liquid dosage forms
• * ISO 11418-5:2015 Part 5: Dropper assemblies
• * ISO 11418-7:2016 Part 7: Screw-neck vials made of glass tubing for liquid dosage forms
• ISO 11421:1997 Optics and optical instruments - Accuracy of optical transfer function measurement
• ISO 11442:2006 Technical product documentation – Document management
• ISO 11446:2004 Road vehicles – Connectors for the electrical connection of towing and towed vehicles – 13-pole connectors for vehicles with 12 V nominal supply voltage
• ISO 11450:1999 Equipment for harvesting and conservation – Round balers – Terminology and commercial specifications
• ISO 11451 Road vehicles – Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy
• * ISO 11451-1:2015 Part 1: General principles and terminology
• * ISO 11451-2:2015 Part 2: Off-vehicle radiation sources
• * ISO 11451-3:2015 Part 3: On-board transmitter simulation
• * ISO 11451-4:2013 Part 4: Bulk current injection
• ISO 11452 Road vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy
• * ISO 11452-1:2015 Part 1: General principles and terminology
• * ISO 11452-2:2004 Part 2: Absorber-lined shielded enclosure
• * ISO 11452-3:2016 Part 3: Transverse electromagnetic cell
• * ISO 11452-4:2011 Part 4: Harness excitation methods
• * ISO 11452-5:2002 Part 5: Stripline
• * ISO 11452-7:2003 Part 7: Direct radio frequency power injection
• * ISO 11452-8:2015 Part 8: Immunity to magnetic fields
• * ISO 11452-9:2012 Part 9: Portable transmitters
• * ISO 11452-10:2009 Part 10: Immunity to conducted disturbances in the extended audio frequency range
• * ISO 11452-11:2010 Part 11: Reverberation chamber
• ISO 11453:1996 Statistical interpretation of data - Tests and confidence intervals relating to proportions
• ISO/IEC 11458:1993 Information technology - Microprocessor systems - VICbus - Inter-crate cable bus
• ISO 11462 Guidelines for implementation of statistical process control
• * ISO 11462-1:2001 Part 1: Elements of SPC
• * ISO 11462-2:2010 Part 2: Catalogue of tools and techniques
• ISO 11469:2000 Plastics – Generic identification and marking of plastics products
• ISO 11484:2009 Steel products – Employer's qualification system for non-destructive testing personnel
• ISO 11485 Glass in building – Curved glass
• * ISO 11485-1:2011 Part 1: Terminology and definitions
• ISO/TR 11487:2008 Health informatics – Clinical stakeholder participation in the work of ISO TC 215
• ISO 11491:2017 Implants for surgery – Determination of impact resistance of ceramic femoral heads for hip joint prostheses
• ISO 11499:2014 Dentistry – Single-use cartridges for local anaesthetics
• ISO/IEC 11518 Information technology - High-Performance Parallel Interface
• * ISO/IEC 11518-1:1995 Part 1: Mechanical, electrical and signalling protocol specification
• * ISO/IEC 11518-2:2000 Part 2: Framing Protocol
• * ISO/IEC 11518-3:1996 Part 3: Encapsulation of ISO/IEC 8802-2 Logical Link Control Protocol Data Units
• * ISO/IEC 11518-6:2000 Part 6: Physical Switch Control
• * ISO/IEC 11518-9:1999 Part 9: Serial specification
• * ISO/IEC 11518-10:2001 Part 10: 6400 Mbit/s Physical Layer
• ISO 11532:2012 Aircraft ground equipment - Graphical symbols
• ISO/IEC 11544:1993 Information technology - Coded representation of picture and audio information - Progressive bi-level image compression
• ISO 11546 Acoustics – Determination of sound insulation performances of enclosures
• * ISO 11546-1:1995 Part 1: Measurements under laboratory conditions
• * ISO 11546-2:1995 Part 2: Measurements in situ
• ISO/TR 11548 Communication aids for blind persons - Identifiers, names and assignation to coded character sets for 8-dot Braille characters
• * ISO/TR 11548-1:2001 Part 1: General guidelines for Braille identifiers and shift marks
• * ISO/TR 11548-2:2001 Part 2: Latin alphabet based character sets
• ISO 11551:2003 Optics and optical instruments – Lasers and laser-related equipment – Test method for absorptance of optical laser components
• ISO 11553 Safety of machinery – Laser processing machines
• * ISO 11553-1:2005 Part 1: General safety requirements
• * ISO 11553-2:2007 Part 2: Safety requirements for hand-held laser processing devices
• * ISO 11553-3:2013 Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment
• ISO 11554:2017 Optics and photonics – Lasers and laser-related equipment – Test methods for laser beam power, energy and temporal characteristics
• ISO/IEC 11557:1992 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS-DC format using 60 m and 90 m length tapes
• ISO/IEC 11558:1992 Information technology – Data compression for information interchange – Adaptive coding with embedded dictionary – DCLZ Algorithm
• ISO/IEC 11559:1993 Information technology – Data interchange on 12,7 mm wide 18-track magnetic tape cartridges – Extended format
• ISO/IEC 11560:1992 Information technology - Information interchange on 130 mm optical disk cartridges using the magneto-optical effect, for write once, read multiple functionality
• ISO 11568 Financial services – Key management
• * ISO 11568-1:2005 Part 1: Principles
• * ISO 11568-2:2012 Part 2: Symmetric ciphers, their key management and life cycle
• * ISO 11568-4:2007 Part 4: Asymmetric cryptosystems – Key management and life cycle
• ISO/IEC 11569:1993 Information technology – Telecommunications and information exchange between systems – 26-pole interface connector mateability dimensions and contact number assignments
• ISO/IEC 11570:1992 Information technology – Telecommunications and information exchange between systems – Open Systems Interconnection – Transport protocol identification mechanism
• ISO/IEC 11571:1998 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Networks – Addressing
• ISO/IEC 11572:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Circuit mode bearer services – Inter-exchange signalling procedures and protocol
• ISO/IEC 11573:1994 Information technology – Telecommunications and information exchange between systems – Synchronization methods and technical requirements for Private Integrated Services Networks
• ISO/IEC 11574:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Circuit-mode 64 kbit/s bearer services – Service description, functional capabilities and information flows
• ISO/IEC 11575:1995 Information technology – Telecommunications and information exchange between systems – Protocol mappings for the OSI Data Link service
• ISO/IEC 11576:1994 Information technology – Procedure for the registration of algorithms for the lossless compression of data
• ISO/IEC 11577:1995 Information technology – Open Systems Interconnection – Network layer security protocol
• ISO/IEC 11578:1996 Information technology – Open Systems Interconnection – Remote procedure call
• ISO/IEC 11579 Information technology – Telecommunications and information exchange between systems – Private integrated services network
• * ISO/IEC 11579-1:1994 Part 1: Reference configuration for PISN Exchanges
• * ISO/IEC 11579-2:1999 Part 2: Reference configuration for HS-PISN Exchanges
• * ISO/IEC 11579-3:1999 Part 3: Reference configuration for PINX extension lines
• ISO/IEC TR 11580:2007 Information technology – Framework for describing user interface objects, actions and attributes
• ISO/IEC 11581 Information technology – User interface icons
• * ISO/IEC 11581-1:2000 Part 1: Icons – General
• * ISO/IEC TR 11581-1:2011 Part 1: Introduction to and overview of icon standards
• * ISO/IEC 11581-2:2000 Part 2: Object icons
• * ISO/IEC 11581-3:2000 Part 3: Pointer icons
• * ISO/IEC 11581-5:2004 Part 5: Tool icons
• * ISO/IEC 11581-6:1999 Part 6: Action icons
• * ISO/IEC 11581-10:2010 Part 10: Framework and general guidance
• * ISO/IEC 11581-40:2011 Part 40: Management of icon registration
• * ISO/IEC TS 11581-41:2014 Part 41: Data structure to be used by the ISO/IEC JTC 1/SC 35 icon database
• ISO/IEC 11582:2002 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Generic functional protocol for the support of supplementary services – Inter-exchange signalling procedures and protocol
• ISO/TR 11583:2012 Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits
• ISO/IEC 11584:1996 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Circuit-mode multi-rate bearer services – Service description, functional capabilities and information flows
• ISO/IEC 11586 Information technology - Open Systems Interconnection - Generic upper layers security
• * ISO/IEC 11586-1:1996 Overview, models and notation
• * ISO/IEC 11586-2:1996 Security Exchange Service Element service definition
• * ISO/IEC 11586-3:1996 Security Exchange Service Element protocol specification
• * ISO/IEC 11586-4:1996 Protecting transfer syntax specification
• * ISO/IEC 11586-5:1997 Security Exchange Service Element Protocol Implementation Conformance Statement proforma
• * ISO/IEC 11586-6:1997 Protecting transfer syntax Protocol Implementation Conformance Statement proforma
• ISO/IEC 11587:1996 Information technology – Open Systems Interconnection – Application Context for Systems Management with Transaction Processing
• ISO 11593:1996 Manipulating industrial robots - Automatic end effector exchange systems - Vocabulary and presentation of characteristics
• ISO 11607:2006 Packaging for Terminally Sterilized Medical Devices
• ISO 11608 Needle-based injection systems for medical use – Requirements and test methods
• * ISO 11608-1:2014 Part 1: Needle-based injection systems
• * ISO 11608-2:2012 Part 2: Needles
• * ISO 11608-3:2012 Part 3: Finished containers
• * ISO 11608-4:2006 Part 4: Requirements and test methods for electronic and electromechanical pen-injectors
• * ISO 11608-5:2012 Part 5: Automated functions
• * ISO 11608-7:2016 Part 7: Accessibility for persons with visual impairment
• ISO 11609:2017 Dentistry - Dentifrices - Requirements, test methods and marking
• ISO/TR 11610:2004 Protective clothing - Vocabulary
• ISO 11612 Protective clothing - Protection against brief contact with heat and flame. The heat can be convective, radiant, molten material, or a combination thereof.
• ISO 11615:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of regulated medicinal product information
• ISO 11616:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of regulated pharmaceutical product information
• ISO 11620:2014 Information and documentation - Library performance indicators
• ISO 11631:1998 Measurement of fluid flow – Methods of specifying flowmeter performance
• ISO/TR 11633 Health informatics – Information security management for remote maintenance of medical devices and medical information systems
• * ISO/TR 11633-1:2009 Part 1: Requirements and risk analysis
• * ISO/TR 11633-2:2009 Part 2: Implementation of an information security management system
• ISO/TR 11636:2009 Health Informatics – Dynamic on-demand virtual private network for health information infrastructure
• ISO 11648 Statistical aspects of sampling from bulk materials
• * ISO 11648-1:2003 Part 1: General principles
• * ISO 11648-2:2001 Part 2: Sampling of particulate materials
• ISO 11649:2009 Financial services – Core banking – Structured creditor reference to remittance information
• ISO/TR 11651:2015 Estimation of sediment deposition in reservoirs using one dimensional simulation models
• ISO 11655:1995 Measurement of liquid flow in open channels – Method of specifying performance of hydrometric equipment
• ISO 11657:2014 Hydrometry – Suspended sediment in streams and canals – Determination of concentration by surrogate techniques
• ISO 11658:2012 Cardiovascular implants and extracorporeal systems – Blood/tissue contact surface modifications for extracorporeal perfusion systems
• ISO 11663:2014 Quality of dialysis fluid for haemodialysis and related therapies
• ISO 11664 Colorimetry
• * ISO 11664-1:2007 Part 1: CIE standard colorimetric observers
• * ISO 11664-2:2007 Part 2: CIE standard illuminants
• * ISO 11664-3:2012 Part 3: CIE tristimulus values
• * ISO 11664-4:2008 Part 4: CIE 1976 L*a*b* Colour space
• * ISO/CIE 11664-5:2016 Part 5: CIE 1976 L*u*v* colour space and u', v' uniform chromaticity scale diagram
• * ISO/CIE 11664-6:2014 Part 6: CIEDE2000 Colour-difference formula
• ISO 11665 Measurement of radioactivity in the environment - Air: radon-222
• * ISO 11665-1:2012 Part 1: Origins of radon and its short-lived decay products and associated measurement methods
• * ISO 11665-2:2012 Part 2: Integrated measurement method for determining average potential alpha energy concentration of its short-lived decay products
• * ISO 11665-3:2012 Part 3: Spot measurement method of the potential alpha energy concentration of its short-lived decay products
• * ISO 11665-4:2012 Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
• * ISO 11665-5:2012 Part 5: Continuous measurement method of the activity concentration
• * ISO 11665-6:2012 Part 6: Spot measurement method of the activity concentration
• * ISO 11665-7:2012 Part 7: Accumulation method for estimating surface exhalation rate
• * ISO 11665-8:2012 Part 8: Methodologies for initial and additional investigations in buildings
• * ISO 11665-9:2016 Part 9: Test methods for exhalation rate of building materials
• * ISO 11665-11:2016 Part 11: Test method for soil gas with sampling at depth
• ISO/TS 11669:2012 Translation projects - General guidance
• ISO 11670:2003 Lasers and laser-related equipment – Test methods for laser beam parameters – Beam positional stability
• ISO/TS 11672:2016 Connectors for fluid power and general use - Designation and nomenclature
• ISO 11675:2005 Textile machinery and accessories – Flatbed knitting machines – Vocabulary
• ISO 11676:2014 Textile machinery and accessories – Pattern disks and pattern chains for warp knitting machines – Vocabulary and symbols
• ISO 11683:1997 Packaging - Tactile warnings of danger - Requirements
• ISO 11684:1995 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Safety signs and hazard pictorials - General principles
• ISO/TR 11688 Acoustics – Recommended practice for the design of low-noise machinery and equipment
• * ISO/TR 11688-1:1995 Part 1: Planning
• * ISO/TR 11688-2:1998 Part 2: Introduction to the physics of low-noise design
• ISO 11689:1996 Acoustics – Procedure for the comparison of noise-emission data for machinery and equipment
• ISO/IEC 11693 Identification cards – Optical memory cards
• * ISO/IEC 11693-1:2012 Part 1: General characteristics
• * ISO/IEC 11693-2:2009 Part 2: Co-existence of optical memory with other machine readable technologies
• * ISO/IEC 11693-3:2015 Part 3: Authentication techniques
• ISO/IEC 11694 Identification cards – Optical memory cards – Linear recording method
• * ISO/IEC 11694-1:2012 Part 1: Physical characteristics
• * ISO/IEC 11694-2:2012 Part 2: Dimensions and location of the accessible optical area
• * ISO/IEC 11694-3:2015 Part 3: Optical properties and characteristics
• * ISO/IEC 11694-4:2008 Part 4: Logical data structures
• * ISO/IEC 11694-5:2014 Part 5: Data format for information interchange for applications using ISO/IEC 11694-4
• * ISO/IEC 11694-6:2014 Part 6: Use of biometrics on an optical memory card
• ISO/IEC 11695 Identification cards – Optical memory cards – Holographic recording method
• * ISO/IEC 11695-1:2015 Part 1: Physical characteristics
• * ISO/IEC 11695-2:2015 Part 2: Dimensions and location of accessible optical area
• * ISO/IEC 11695-3:2017 Part 3: Optical properties and characteristics
• ISO 11704:2010 Water quality - Measurement of gross alpha and beta activity concentration in non-saline water - Liquid scintillation counting method
• ISO 11712:2009 Anaesthetic and respiratory equipment – Supralaryngeal airways and connectors
• ISO 11731:2017 Water quality - Enumeration of Legionella
• ISO 11737 Sterilization of medical devices – Microbiological methods
• * ISO 11737-1:2006 Part 1: Determination of a population of microorganisms on products
• * ISO 11737-2:2009 Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process
• ISO/IEC 11756:1999 Information technology - Programming languages - M
• ISO/TR 11766:2010 Intelligent transport systems – Communications access for land mobiles – Security considerations for lawful interception
• ISO/TR 11769:2010 Intelligent transport systems – Communications access for land mobiles – Data retention for law enforcement
• ISO/IEC 11770 Information technology - Security techniques - Key management
• * ISO/IEC 11770-1:2010 Part 1: Framework
• * ISO/IEC 11770-2:2008 Part 2: Mechanisms using symmetric techniques
• * ISO/IEC 11770-3:2015 Part 3: Mechanisms using asymmetric techniques
• * ISO/IEC 11770-4:2006 Part 4: Mechanisms based on weak secrets
• * ISO/IEC 11770-5:2011 Part 5: Group key management
• * ISO/IEC 11770-6:2016 Part 6: Key derivation
• ISO/TS 11774:2011 Non-destructive testing – Performance-based qualification
• ISO 11783 Tractors and machinery for agriculture and forestry – Serial control and communications data network
• ISO 11798:1999 Information and documentation - Permanence and durability of writing, printing and copying on paper - Requirements and test methods
• ISO 11799:2015 Information and documentation - Document storage requirements for archive and library materials
• ISO 11800:1998 Information and documentation – Requirements for binding materials and methods used in the manufacture of books
• ISO/IEC 11801:2002 Information technology – Generic cabling for customer premises
• * ISO/IEC TR 11801-9901:2014 Part 9901: Guidance for balanced cabling in support of at least 40 Gbit/s data transmission
• * ISO/IEC TR 11801-9902:2017 Part 9902: Specifications for End-to-end link configurations
• * ISO/IEC TR 11801-9903:2015 Part 9903: Matrix modelling of channels and links
• * ISO/IEC TR 11801-9904:2017 Part 9904: Guidelines for the use of installed cabling to support 2,5GBASE -T and 5GBASE -T applications
• ISO/IEC TR 11802 Information technology – Telecommunications and information exchange between systems – Local and metropolitan area networks – Technical reports and guidelines
• * ISO/IEC TR 11802-5:1997 Part 5: Media Access Control Bridging of Ethernet V2.0 in Local Area Networks
• ISO 11807 Integrated optics - Vocabulary
• * ISO 11807-1:2001 Part 1: Basic terms and symbols
• * ISO 11807-2:2001 Part 2: Terms used in classification
• ISO 11810:2015 Lasers and laser-related equipment – Test method and classification for the laser resistance of surgical drapes and/or patient protective covers – Primary ignition, penetration, flame spread and secondary ignition
• ISO/TR 11811:2012 Nanotechnologies – Guidance on methods for nano- and microtribology measurements
• ISO 11819 Acoustics – Measurement of the influence of road surfaces on traffic noise
• * ISO 11819-1:1997 Part 1: Statistical Pass-By method
• * ISO 11819-2:2017 Part 2: The close-proximity method
• * ISO/TS 11819-3:2017 Part 3: Reference tyres
• * ISO/PAS 11819-4:2013 Part 4: SPB method using backing board
• ISO 11821:1997 Acoustics – Measurement of the in situ sound attenuation of a removable screen
• ISO 11822:1996 Information and documentation - Extension of the Arabic alphabet coded character set for bibliographic information interchange
• ISO 11838:1997 Motorcycle and motorcycle-rider kinematics – Vocabulary
• ISO 11841 Road vehicles and internal combustion engines – Filter vocabulary
• * ISO 11841-1:2000 Part 1: Definitions of filters and filter components
• * ISO 11841-2:2000 Part 2: Definitions of characteristics of filters and their components
• ISO 11843 Capability of detection
• * ISO 11843-1:1997 Part 1: Terms and definitions
• * ISO 11843-2:2000 Part 2: Methodology in the linear calibration case
• * ISO 11843-3:2003 Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used
• * ISO 11843-4:2003 Part 4: Methodology for comparing the minimum detectable value with a given value
• * ISO 11843-5:2008 Part 5: Methodology in the linear and non-linear calibration cases
• * ISO 11843-6:2013 Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
• * ISO 11843-7:2012 Part 7: Methodology based on stochastic properties of instrumental noise
• ISO 11866 Milk and milk products – Enumeration of presumptive Escherichia coli
• * ISO 11866-1:2005 Part 1: Most probable number technique using 4-methylumbelliferyl-beta-D-glucuronide
• * ISO 11866-2:2005 Part 2: Colony-count technique at 44 degrees C using membranes
• ISO 11886:2002 Building construction machinery and equipment – Pile driving and extracting equipment – Terminology and commercial specifications
• ISO/TS 11888:2017 Nanotechnologies – Characterization of multiwall carbon nanotubes – Mesoscopic shape factors
• ISO/IEC 11889 Information technology - Trusted platform module library
• * ISO/IEC 11889-1:2015 Part 1: Architecture
• * ISO/IEC 11889-2:2015 Part 2: Structures
• * ISO/IEC 11889-3:2015 Part 3: Commands
• * ISO/IEC 11889-4:2015 Part 4: Supporting Routines
• ISO 11898 Road vehicles – Controller area network
• ISO 11904 Acoustics – Determination of sound immission from sound sources placed close to the ear
• * ISO 11904-1:2002 Part 1: Technique using a microphone in a real ear
• * ISO 11904-2:2004 Part 2: Technique using a manikin
• ISO 11929:2010 Determination of the characteristic limits for measurements of ionizing radiation - Fundamentals and application
• ISO 11930:2012 Cosmetics – Microbiology – Evaluation of the antimicrobial protection of a cosmetic product
• ISO/TS 11931:2012 Nanotechnologies – Nanoscale calcium carbonate in powder form – Characteristics and measurement
• ISO/TS 11937:2012 Nanotechnologies – Nanoscale titanium dioxide in powder form – Characteristics and measurement
• ISO 11940:1998 Information and documentation - Transliteration of Thai
• * ISO 11940-2:2007 Information and documentation - Transliteration of Thai characters into Latin characters - Part 2: Simplified transcription of Thai language
• ISO/TR 11941:1996 Information and documentation - Transliteration of Korean script into Latin characters
• ISO 11957:1996 Acoustics – Determination of sound insulation performance of cabins – Laboratory and in situ measurements
• ISO/IEC 11976:2008 Information technology - Data interchange on 130 mm rewritable and write-once-read-many ultra density optical disk cartridges - Capacity: 60 Gbytes per cartridge - Second generation
• ISO 11978:2017 Ophthalmic optics – Contact lenses and contact lens care products – Labelling
• ISO 11979 Ophthalmic implants - Intraocular lenses
• * ISO 11979-1:2012 Part 1: Vocabulary
• * ISO 11979-2:2014 Part 2: Optical properties and test methods
• * ISO 11979-3:2012 Part 3: Mechanical properties and test methods
• * ISO 11979-4:2008 Part 4: Labelling and information
• * ISO 11979-5:2006 Part 5: Biocompatibility
• * ISO 11979-6:2014 Part 6: Shelf-life and transport stability testing
• * ISO 11979-7:2014 Part 7: Clinical investigations
• * ISO 11979-8:2017 Part 8: Fundamental requirements
• * ISO 11979-9:2006 Part 9: Multifocal intraocular lenses
• * ISO 11979-10:2006 Part 10: Phakic intraocular lenses
• ISO 11980:2012 Ophthalmic optics – Contact lenses and contact lens care products – Guidance for clinical investigations
• ISO 11981:2009 Ophthalmic optics – Contact lenses and contact lens care products – Determination of physical compatibility of contact lens care products with contact lenses
• ISO 11986:2010 Ophthalmic optics – Contact lenses and contact lens care products – Determination of preservative uptake and release
• ISO 11987:2012 Ophthalmic optics – Contact lenses – Determination of shelf-life
• ISO/IEC 11989:2010 Information technology - iSCSI Management API
• ISO 11990 Lasers and laser-related equipment – Determination of laser resistance of tracheal tubes
• * ISO 11990-1:2011 Part 1: Tracheal tube shaft
• * ISO 11990-2:2010 Part 2: Tracheal tube cuffs
• ISO/TR 11991:1995 Guidance on airway management during laser surgery of upper airway
• ISO 11994:1997 Cranes – Availability – Vocabulary