List of International Organization for Standardization standards, 14000-14999
This is a list of published International Organization for Standardization standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue.
The standards are protected by copyright and most of them must be purchased. However, about 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 have been made freely and publicly available.
ISO 14000 – ISO 14999
- ISO 14000 Environmental management systems
- ISO 14001:2015 Environmental management systems – Requirements with guidance for use
- ISO 14004:2016 Environmental management systems – General guidelines on implementation
- ISO 14005:2010 Environmental management systems – Guidelines for the phased implementation of an environmental management system, including the use of environmental performance evaluation
- ISO 14006:2011 Environmental management systems – Guidelines for incorporating ecodesign
- ISO 14031 Environmental management - Environmental performance evaluation – Guidelines
- ISO 14050:2009 Environmental management – Vocabulary
- ISO 14051 Environmental management – Material flow cost accounting - General framework
- ISO 14064 Greenhouse gases
- ISO/TR 14073:2017 Environmental management - Water footprint - Illustrative examples on how to apply ISO 14046
- ISO 14084 Process diagrams for power plants
- * ISO 14084-1:2015 Part 1: Specification for diagrams
- * ISO 14084-2:2015 Part 2: Graphical symbols
- ISO/TS 14101:2012 Surface characterization of gold nanoparticles for nanomaterial specific toxicity screening: FT-IR method
- ISO/IEC 14102:2008 Information technology - Guideline for the evaluation and selection of CASE tools
- ISO/TR 14105:2011 Document management - Change management for successful electronic document management system implementation
- ISO 14117:2012 Active implantable medical devices – Electromagnetic compatibility – EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices
- ISO 14132 Optics and photonics - Vocabulary for telescopic systems
- * ISO 14132-1:2015 Part 1: General terms and alphabetical indexes of terms in ISO 14132
- * ISO 14132-2:2015 Part 2: Terms for binoculars, monoculars and spotting scopes
- * ISO 14132-3:2014 Part 3: Terms for telescopic sights
- * ISO 14132-4:2015 Part 4: Terms for astronomical telescopes
- * ISO 14132-5:2008 Part 5: Terms for night vision devices
- ISO/IEC 14136:1995 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Identification supplementary services
- ISO 14139:2000 Hydrometric determinations – Flow measurements in open channels using structures – Compound gauging structures
- ISO/IEC 14143 Information technology - Software measurement - Functional size measurement
- * ISO/IEC 14143-1:2007 Part 1: Definition of concepts
- * ISO/IEC 14143-2:2011 Part 2: Conformity evaluation of software size measurement methods to ISO/IEC 14143-1
- * ISO/IEC TR 14143-3:2003 Part 3: Verification of functional size measurement methods
- * ISO/IEC TR 14143-4:2002 Part 4: Reference model
- * ISO/IEC TR 14143-5:2004 Part 5: Determination of functional domains for use with functional size measurement
- * ISO/IEC 14143-6:2012 Part 6: Guide for use of ISO/IEC 14143 series and related International Standards
- ISO 14145 Roller ball pens and refills
- * ISO 14145-2:1998 Part 2: Documentary use
- ISO 14155:2011 Clinical investigation of medical devices for human subjects – Good clinical practice
- ISO 14163:1998 Acoustics – Guidelines for noise control by silencers
- ISO 14164:1999 Stationary source emissions – Determination of the volume flowrate of gas streams in ducts – Automated method
- ISO/IEC 14165 Information technology - Fibre Channel
- * ISO/IEC 14165-114:2005 Part 114: 100 MB/s Balanced copper physical interface
- * ISO/IEC 14165-115:2006 Part 115: Physical Interfaces
- * ISO/IEC 14165-116:2005 Part 116: 10 Gigabit
- * ISO/IEC TR 14165-117:2007 Part 117: Methodologies for jitter and signal quality
- * ISO/IEC 14165-122:2005 Part 122: Arbitrated Loop-2
- * ISO/IEC 14165-131:2000 Part 131: Switch Fabric Requirements
- * ISO/IEC 14165-133:2010 Part 133: Switch Fabric-3
- * ISO/IEC 14165-141:2001 Part 141: Fabric Generic Requirements
- * ISO/IEC 14165-211:1999 Part 211: Mapping to HIPPI-FP
- * ISO/IEC 14165-222:2005 Part 222: Single-byte command code 2 mapping protocol
- * ISO/IEC 14165-241:2005 Part 241: Backbone 2
- * ISO/IEC 14165-243:2012 Part 243: Backbone 3
- * ISO/IEC 14165-251:2008 Part 251: Framing and Signaling
- * ISO/IEC TR 14165-312:2009 Part 312: Avionics environment upper layer protocol MIL-STD-1553B Notice 2
- * ISO/IEC TR 14165-313:2013 Part 313: Avionics Environment—Anonymous Synchronous Messaging
- * ISO/IEC TR 14165-314:2013 Part 314: Avionics Environment – Remote Direct Memory Access
- * ISO/IEC 14165-321:2009 Part 321: Audio-Video
- * ISO/IEC 14165-331:2007 Part 331: Virtual Interface
- * ISO/IEC TR 14165-372:2011 Part 372: Methodologies of interconnects-2
- * ISO/IEC 14165-414:2007 Part 414: Generic Services—4
- * ISO/IEC 14165-521:2009 Part 521: Fabric application interface standard
- ISO/IEC 14169:1995 Information technology – 90 mm flexible disk cartridges – 21 MBytes formatted capacity – ISO Type 305
- ISO 14189:2013 Water quality – Enumeration of Clostridium perfringens – Method using membrane filtration
- ISO 14199:2015 Health informatics – Information models – Biomedical Research Integrated Domain Group Model
- ISO 14223 identification of animals – Advanced transponders
- ISO 14224 Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment
- ISO 14230 Road vehicles – Diagnostic systems – Keyword Protocol 2000
- ISO 14242 Implants for surgery – Wear of total hip-joint prostheses
- * ISO 14242-1:2014 Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
- * ISO 14242-2:2016 Part 2: Methods of measurement
- * ISO 14242-3:2009 Part 3: Loading and displacement parameters for orbital bearing type wear testing machines and corresponding environmental conditions for test
- ISO 14243 Implants for surgery – Wear of total knee-joint prostheses
- * ISO 14243-1:2009 Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test
- * ISO 14243-2:2016 Part 2: Methods of measurement
- * ISO 14243-3:2014 Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test
- ISO/IEC 14251:1995 Information technology – Data interchange on 12,7 mm 36-track magnetic tape cartridges
- ISO/IEC TR 14252:1996 Information technology - Guide to the POSIX Open System Environment
- ISO 14253 Geometrical product specifications - Inspection by measurement of workpieces and measuring equipment
- * ISO 14253-1:2013 Part 1: Decision rules for proving conformity or nonconformity with specifications
- * ISO 14253-2:2011 Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
- * ISO 14253-3:2011 Part 3: Guidelines for achieving agreements on measurement uncertainty statements
- * ISO/TS 14253-4:2010 Part 4: Background on functional limits and specification limits in decision rules
- * ISO 14253-5:2015 Part 5: Uncertainty in verification testing of indicating measuring instruments
- * ISO/TR 14253-6:2012 Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces
- ISO/TS 14265:2011 Health Informatics – Classification of purposes for processing personal health information
- ISO/TR 14283:2004 Implants for surgery – Fundamental principles
- ISO 14289 Document management applications - Electronic document file format enhancement for accessibility
- * ISO 14289-1:2014 Part 1: Use of ISO 32000-1
- ISO/TR 14292:2012 Health informatics – Personal health records – Definition, scope and context
- ISO 14296:2016 Intelligent transport systems – Extension of map database specifications for applications of cooperative ITS
- ISO 14302:2002 Space systems – Electromagnetic compatibility requirements
- ISO 14362 Textiles - Methods for determination of certain aromatic amines derived from azo colorants
- * ISO 14362-1:2017 Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres
- * ISO 14362-3:2017 Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene
- ISO/IEC TR 14369:2018 Information technology – Programming languages, their environments and system software interfaces – Guidelines for the preparation of language-independent service specifications
- ISO 14405 Geometrical product specifications – Dimensional tolerancing
- * ISO 14405-1:2016 Part 1: Linear sizes
- * ISO 14405-2:2011 Part 2: Dimensions other than linear sizes
- * ISO 14405-3:2016 Part 3: Angular sizes
- ISO 14406:2010 Geometrical product specifications - Extraction
- ISO 14408:2016 Tracheal tubes designed for laser surgery – Requirements for marking and accompanying information
- ISO 14416:2003 Information and documentation – Requirements for binding of books, periodicals, serials and other paper documents for archive and library use – Methods and materials
- ISO/IEC 14417:1999 Information technology – Data recording format DD-1 for magnetic tape cassette conforming to IEC 1016
- ISO/TS 14441:2013 Health informatics – Security and privacy requirements of EHR systems for use in conformity assessment
- ISO/IEC 14443 Identification cards – Contactless integrated circuit cards – Proximity cards
- ISO 14451 Pyrotechnic articles – Pyrotechnic articles for vehicles
- * ISO 14451-1:2013 Part 1: Terminology
- ISO 14452:2012 Network services billing – Requirements
- ISO 14461 Milk and milk products – Quality control in microbiological laboratories
- * ISO 14461-1:2005 Part 1: Analyst performance assessment for colony counts
- * ISO 14461-2:2005 Part 2: Determination of the reliability of colony counts of parallel plates and subsequent dilution steps
- ISO/IEC 14462:2010 Information technology - Open-edi reference model
- ISO/TR 14468:2010 Selected illustrations of attribute agreement analysis
- ISO/IEC TR 14471:2007 Information technology - Software engineering - Guidelines for the adoption of CASE tools
- ISO/IEC 14473:1999 Information technology - Office equipment - Minimum information to be specified for image scanners
- ISO/IEC 14474:1998 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Functional requirements for static circuit-mode inter-PINX connections
- ISO/IEC TR 14475:2001 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Architecture and scenarios for Private Integrated Services Networking
- ISO/IEC 14476 Information technology – Enhanced communications transport protocol
- * ISO/IEC 14476-1:2002 Specification of simplex multicast transport
- * ISO/IEC 14476-2:2003 Specification of QoS management for simplex multicast transport
- * ISO/IEC 14476-3:2008 Specification of duplex multicast transport
- * ISO/IEC 14476-4:2010 Specification of QoS management for duplex multicast transport
- * ISO/IEC 14476-5:2008 Specification of N-plex multicast transport
- * ISO/IEC 14476-6:2010 Specification of QoS management for n-plex multicast transport
- ISO/IEC 14478 Information technology - Computer graphics and image processing - Presentation Environment for Multimedia Objects
- * ISO/IEC 14478-1:1998 Part 1: Fundamentals of PREMO
- * ISO/IEC 14478-2:1998 Part 2: Foundation Component
- * ISO/IEC 14478-3:1998 Part 3: Multimedia Systems Services
- * ISO/IEC 14478-4:1998 Part 4: Modelling, rendering and interaction component
- ISO/IEC 14492:2001 Information technology - Lossy/lossless coding of bi-level images
- ISO/IEC 14495 Information technology - Lossless and near-lossless compression of continuous-tone still images
- * ISO/IEC 14495-1:1999 Baseline
- * ISO/IEC 14495-2:2003 Extensions
- ISO/IEC 14496 Information technology – Coding of audio-visual objects
- ISO 14500:2003 Textile machinery and accessories – Harnesses for Jacquard weaving machines – Vocabulary
- ISO 14509 Small craft – Airborne sound emitted by powered recreational craft
- * ISO 14509-1:2008 Part 1: Pass-by measurement procedures
- * ISO 14509-3:2009 Part 3: Sound assessment using calculation and measurement procedures
- ISO 14511:2001 Measurement of fluid flow in closed conduits – Thermal mass flowmeters
- ISO/IEC 14515 Information technology - Portable Operating System Interface - Test methods for measuring conformance to POSIX
- * ISO/IEC 14515-1:2000 Part 1: System interfaces
- ISO/IEC TR 14516:2002 Information technology - Security techniques - Guidelines for the use and management of Trusted Third Party services
- ISO/IEC 14517:1996 Information technology - 130 mm optical disk cartridges for information interchange - Capacity: 2,6 Gbytes per cartridge
- ISO/IEC 14519:2001 Information technology - POSIX Ada Language Interfaces - Binding for System Application Program Interface
- ISO 14532:2014 Natural gas – Vocabulary
- ISO 14533 Processes, data elements and documents in commerce, industry and administration – Long term signature profiles
- * ISO 14533-1:2014 Part 1: Long term signature profiles for CMS Advanced Electronic Signatures
- * ISO 14533-2:2012 Part 2: Long term signature profiles for XML Advanced Electronic Signatures
- * ISO 14533-3:2017 Part 3: Long term signature profiles for PDF Advanced Electronic Signatures
- ISO 14534:2011 Ophthalmic optics – Contact lenses and contact lens care products – Fundamental requirements
- ISO 14539:2000 Manipulating industrial robots - Object handling with grasp-type grippers - Vocabulary and presentation of characteristics
- ISO/IEC 14543 Information technology – Home Electronic System architecture
- * ISO/IEC 14543-2-1:2006 Part 2-1: Introduction and device modularity
- * ISO/IEC 14543-3-1:2006 Part 3-1: Communication layers – Application layer for network based control of HES Class 1
- * ISO/IEC 14543-3-2:2006 Part 3-2: Communication layers – Transport, network and general parts of data link layer for network based control of HES Class 1
- * ISO/IEC 14543-3-3:2007 Part 3-3: User process for network based control of HES Class 1
- * ISO/IEC 14543-3-4:2007 Part 3-4: System management – Management procedures for network based control of HES Class 1
- * ISO/IEC 14543-3-5:2007 Part 3-5: Media and media dependent layers – Power line for network based control of HES Class 1
- * ISO/IEC 14543-3-6:2007 Part 3-6: Media and media dependent layers – Network based on HES Class 1, twisted pair
- * ISO/IEC 14543-3-7:2007 Part 3-7: Media and media dependent layers – Radio frequency for network based control of HES Class 1
- * ISO/IEC 14543-3-10:2012 Part 3-10: Wireless short-packet protocol optimized for energy harvesting – Architecture and lower layer protocols
- * ISO/IEC 14543-3-11:2016 Part 3-11: Frequency modulated wireless short-packet protocol optimised for energy harvesting – Architecture and lower layer protocols
- * ISO/IEC TR 14543-4:2002 Part 4: Home and building automation in a mixed-use building
- * ISO/IEC 14543-4-1:2008 Part 4-1: Communication layers – Application layer for network enhanced control devices of HES Class 1
- * ISO/IEC 14543-4-2:2008 Part 4-2: Communication layers – Transport, network and general parts of data link layer for network enhanced control devices of HES Class 1
- * ISO/IEC 14543-4-3:2015 Part 4-3: Application layer interface to lower communications layers for network enhanced control devices of HES Class 1
- * ISO/IEC 14543-5-1:2010 Part 5-1: Intelligent grouping and resource sharing for Class 2 and Class 3 – Core protocol
- * ISO/IEC 14543-5-3:2012 Part 5-3: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Basic application
- * ISO/IEC 14543-5-4:2010 Part 5-4: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Device validation
- * ISO/IEC 14543-5-5:2012 Part 5-5: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Device type
- * ISO/IEC 14543-5-6:2012 Part 5-6: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Service type
- * ISO/IEC 14543-5-7:2015 Part 5-7: Intelligent grouping and 3 resource sharing – Remote access system architecture
- * ISO/IEC 14543-5-8:2017 Part 5-8: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Remote access core protocol
- * ISO/IEC 14543-5-9:2017 Part 5-9: Intelligent grouping and resource sharing for HES class 2 and class 3 – Remote access service platform
- * ISO/IEC 14543-5-21:2012 Part 5-21: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Application profile – AV profile
- * ISO/IEC 14543-5-22:2010 Part 5-22: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Application profile – File profile
- ISO 14560:2004 Acceptance sampling procedures by attributes - Specified quality levels in nonconforming items per million
- ISO/TR 14564:1995 Shipbuilding and marine structures - Marking of escape routes
- ISO/IEC 14568:1997 Information technology - DXL: Diagram eXchange Language for tree-structured charts
- ISO/IEC 14575:2000 Information technology - Microprocessor systems - Heterogeneous InterConnect
- ISO/IEC 14576:1999 Information technology - Synchronous Split Transfer Type System Bus - Logical Layer
- ISO 14588:2000 Blind rivets - Terminology and definitions
- ISO/IEC 14598 Software engineering - Product evaluation
- * ISO/IEC 14598-5:1998 Part 5: Process for evaluators
- * ISO/IEC 14598-6:2001 Part 6: Documentation of evaluation modules
- ISO 14602:2010 Non-active surgical implants – Implants for osteosynthesis – Particular requirements
- ISO 14607:2007 Non-active surgical implants – Mammary implants – Particular requirements
- ISO 14617 Graphical symbols for diagrams
- * ISO 14617-1:2005 Part 1: General information and indexes
- * ISO 14617-2:2002 Part 2: Symbols having general application
- * ISO 14617-3:2002 Part 3: Connections and related devices
- * ISO 14617-3:2002 Part 3: Connections and related devices
- * ISO 14617-4:2002 Part 4: Actuators and related devices
- * ISO 14617-5:2002 Part 5: Measurement and control devices
- * ISO 14617-6:2002 Part 6: Measurement and control functions
- * ISO 14617-7:2002 Part 7: Basic mechanical components
- * ISO 14617-8:2002 Part 8: Valves and dampers
- * ISO 14617-9:2002 Part 9: Pumps, compressors and fans
- * ISO 14617-10:2002 Part 10: Fluid power converters
- * ISO 14617-11:2002 Part 11: Devices for heat transfer and heat engines
- * ISO 14617-12:2002 Part 12: Devices for separating, purification and mixing
- * ISO 14617-13:2004 Part 13: Devices for material processing
- * ISO 14617-14:2004 Part 14: Devices for transport and handling of material
- * ISO 14617-15:2002 Part 15: Installation diagrams and network maps
- ISO 14630:2012 Non-active surgical implants – General requirements
- ISO 14638:2015 Geometrical product specifications - Matrix model
- ISO/TR 14639 Health informatics – Capacity-based eHealth architecture roadmap
- * ISO/TR 14639-1:2012 Part 1: Overview of national eHealth initiatives
- * ISO/TR 14639-2:2014 Part 2: Architectural components and maturity model
- ISO 14641 Electronic archiving
- * ISO 14641-1:2012 Specifications concerning the design and the operation of an information system for electronic information preservation
- ISO 14644 Cleanrooms and associated controlled environments
- ISO/IEC 14651:2016 Information technology - International string ordering and comparison - Method for comparing character strings and description of the common template tailorable ordering
- ISO/IEC 14662:2010 Information technology – Open-edi reference model
- ISO/TR 14685:2001 Hydrometric determinations – Geophysical logging of boreholes for hydrogeological purposes – Considerations and guidelines for making measurements
- ISO 14686:2003 Hydrometric determinations – Pumping tests for water wells – Considerations and guidelines for design, performance and use
- ISO 14695:2003 Industrial fans – Method of measurement of fan vibration
- ISO 14698 Cleanrooms and associated controlled environments – Biocontamination control
- * ISO 14698-1:2003 General principles and methods
- * ISO 14698-2:2003 Evaluation and interpretation of biocontamination data
- ISO/IEC 14699:1997 Information technology – Open Systems Interconnection – Transport Fast Byte Protocol
- ISO/IEC 14700:1997 Information technology – Open Systems Interconnection – Network Fast Byte Protocol
- ISO 14708 Implants for surgery – Active implantable medical devices
- * ISO 14708-1:2014 Part 1: General requirements for safety, marking and for information to be provided by the manufacturer
- * ISO 14708-2:2012 Part 2: Cardiac pacemakers
- * ISO 14708-3:2017 Part 3: Implantable neurostimulators
- * ISO 14708-4:2008 Part 4: Implantable infusion pumps
- * ISO 14708-5:2010 Part 5: Circulatory support devices
- * ISO 14708-6:2010 Part 6: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia
- * ISO 14708-7:2013 Part 7: Particular requirements for cochlear implant systems
- ISO/IEC 14709 Information technology - Configuration of Customer Premises Cabling for applications
- * ISO/IEC 14709-1:1997 Part 1: Integrated Services Digital Network basic access
- * ISO/IEC 14709-2:1998 Part 2: Integrated Services Digital Network primary rate
- ISO 14722:1998 Moped and moped-rider kinematics – Vocabulary
- ISO 14726:2008 Ships and marine technology – Identification colours for the content of piping systems
- ISO 14729:2001 Ophthalmic optics – Contact lens care products – Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses
- ISO 14730:2014 Ophthalmic optics – Contact lens care products – Antimicrobial preservative efficacy testing and guidance on determining discard date
- ISO 14739 Document management - 3D use of Product Representation Compact format
- * ISO 14739-1:2014 Part 1: PRC 10001
- ISO/TR 14742:2010 Financial services – Recommendations on cryptographic algorithms and their use
- ISO/IEC 14750:1999 Information technology – Open Distributed Processing – Interface Definition Language
- ISO/IEC 14752:2000 Information technology - Open Distributed Processing - Protocol support for computational interactions
- ISO/IEC 14753:1999 Information technology - Open Distributed Processing - Interface references and binding
- ISO/IEC 14754:1999 Information technology – Pen-Based Interfaces – Common gestures for Text Editing with Pen-Based Systems
- ISO/IEC 14755:1997 Information technology – Input methods to enter characters from the repertoire of ISO/IEC 10646 with a keyboard or other input device
- ISO/IEC 14756:1999 Information technology - Measurement and rating of performance of computer-based software systems
- ISO/IEC 14760:1997 Information technology - Data interchange on 90 mm overwritable and read only optical disk cartridges using phase change - Capacity: 1,3 Gbytes per cartridge
- ISO/IEC 14762:2009 Information technology - Functional safety requirements for Home and Building Electronic Systems
- ISO/IEC 14763 Information technology - Implementation and operation of customer premises cabling
- * ISO/IEC 14763-1:1999 Part 1: Administration
- * ISO/IEC 14763-2:2012 Part 2: Planning and installation
- * ISO/IEC TR 14763-2-1:2011 Part 2-1: Planning and installation - Identifiers within administration systems
- * ISO/IEC 14763-3:2014 Part 3: Testing of optical fibre cabling
- ISO/IEC 14764:2006 Software Engineering - Software Life Cycle Processes - Maintenance
- ISO/IEC 14765:1997 Information technology - Framework for protocol identification and encapsulation
- ISO/IEC 14766:1997 Information technology - Telecommunications and information exchange between systems - Use of OSI applications over the Internet Transmission Control Protocol
- ISO/IEC 14769:2001 Information technology - Open Distributed Processing - Type Repository Function
- ISO/IEC 14771:1999 Information technology - Open Distributed Processing - Naming framework
- ISO/IEC 14772 Information technology - Computer graphics and image processing - The Virtual Reality Modeling Language
- * ISO/IEC 14772-1:1997 Part 1: Functional specification and UTF-8 encoding
- * ISO/IEC 14772-2:2004 Part 2: External authoring interface
- ISO/IEC 14776 Information technology - Small Computer System Interface
- * ISO/IEC 14776-112:2002 Part 112: Parallel Interface-2
- * ISO/IEC 14776-113:2002 Part 113: Parallel Interface-3
- * ISO/IEC 14776-115:2004 Part 115: Parallel Interface-5
- * ISO/IEC 14776-121:2010 Part 121: Passive Interconnect Performance
- * ISO/IEC 14776-150:2004 Part 150: Serial Attached SCSI
- * ISO/IEC 14776-151:2010 Part 151: Serial Attached SCSI - 1.1
- * ISO/IEC 14776-153:2015 Part 153: Serial Attached SCSI - 2.1
- * ISO/IEC 14776-154:2017 Part 154: Serial Attached SCSI – 3
- * ISO/IEC 14776-222:2005 Part 222: Fibre Channel Protocol for SCSI, Second Version
- * ISO/IEC 14776-223:2008 Part 223: Fibre Channel Protocol for SCSI, Third Version
- * ISO/IEC 14776-232:2001 Part 232: Serial Bus Protocol 2
- * ISO/IEC 14776-251:2014 Part 251: USB attached SCSI
- * ISO/IEC 14776-261:2012 Part 261: SAS Protocol Layer
- * ISO/IEC 14776-262:2017 Part 262: SAS protocol layer - 2
- * ISO/IEC 14776-321:2002 Part 321: SCSI-3 Block Commands
- * ISO/IEC 14776-322:2007 Part 322: SCSI Block Commands - 2
- * ISO/IEC 14776-323:2017 Part 323: SCSI Block commands - 3
- * ISO/IEC 14776-326:2015 Part 326: Reduced block commands
- * ISO/IEC 14776-331:2002 Part 331: Stream Commands
- * ISO/IEC 14776-333:2013 Part 333: SCSI Stream Commands - 3
- * ISO/IEC 14776-341:2000 Part 341: Controller Commands
- * ISO/IEC 14776-342:2000 Part 342: Controller Commands - 2
- * ISO/IEC 14776-351:2007 Part 351: Medium Changer Commands
- * ISO/IEC 14776-362:2006 Part 362: Multimedia commands-2
- * ISO/IEC 14776-372:2011 Part 372: SCSI Enclosure Services - 2
- * ISO/IEC 14776-381:2000 Part 381: Optical Memory Card Device Commands
- * ISO/IEC 14776-411:1999 Part 411: SCSI-3 Architecture Model
- * ISO/IEC 14776-412:2006 Part 412: Architecture Model -2
- * ISO/IEC 14776-413:2007 Part 413: SCSI Architecture Model -3
- * ISO/IEC 14776-414:2009 Part 414: SCSI Architecture Model-4
- * ISO/IEC 14776-452:2005 Part 452: SCSI Primary Commands - 2
- * ISO/IEC 14776-453:2009 Part 453: Primary commands-3
- ISO 14785:2014 Tourist information offices – Tourist information and reception services – Requirements
- ISO/TR 14786:2014 Nanotechnologies – Considerations for the development of chemical nomenclature for selected nano-objects
- ISO 14801 Dentistry – Implants – Dynamic fatigue test for endosseous dental implants
- ISO/TR 14806:2013 Intelligent transport systems – Public transport requirements for the use of payment applications for fare media
- ISO 14813 Intelligent transport systems – Reference model architecture for the ITS sector
- * ISO 14813-1:2015 Part 1: ITS service domains, service groups and services
- * ISO 14813-5:2010 Part 5: Requirements for architecture description in ITS standards
- * ISO 14813-6:2009 Part 6: Data presentation in ASN.1
- ISO 14814:2006 Road transport and traffic telematics – Automatic vehicle and equipment identification – Reference architecture and terminology
- ISO 14815:2005 Road transport and traffic telematics – Automatic vehicle and equipment identification – System specifications
- ISO 14816:2005 Road transport and traffic telematics – Automatic vehicle and equipment identification – Numbering and data structure
- ISO 14817 Intelligent transport systems – ITS central data dictionaries
- * ISO 14817-1:2015 Part 1: Requirements for ITS data definitions
- * ISO 14817-2:2015 Part 2: Governance of the Central ITS Data Concept Registry
- * ISO 14817-3:2017 Part 3: Object identifier assignments for ITS data concepts
- ISO 14819 Intelligent transport systems – Traffic and travel information messages via traffic message coding
- * ISO 14819-1:2013 Part 1: Coding protocol for Radio Data System – Traffic Message Channel using ALERT-C
- * ISO 14819-2:2013 Part 2: Event and information codes for Radio Data System – Traffic Message Channel using ALERT-C
- * ISO 14819-3:2013 Part 3: Location referencing for Radio Data System – Traffic Message Channel using ALERT-C
- * ISO 14819-6:2006 Part 6: Encryption and conditional access for the Radio Data System – Traffic Message Channel ALERT C coding
- ISO 14823:2017 Intelligent transport systems – Graphic data dictionary
- ISO 14825:2011 Intelligent transport systems – Geographic Data Files – GDF5.0
- ISO 14827 Transport information and control systems – Data interfaces between centres for transport information and control systems
- * ISO 14827-1:2005 Part 1: Message definition requirements
- * ISO 14827-2:2005 Part 2: DATEX-ASN
- ISO/IEC 14833:1996 Information technology – Data interchange on 12,7 mm 128-Track magnetic tape cartridges – DLT 3 format
- ISO/IEC 14834:1996 Information technology - Distributed Transaction Processing - The XA Specification
- ISO 14837 Mechanical vibration – Ground-borne noise and vibration arising from rail systems
- * ISO 14837-1:2005 Part 1: General guidance
- * ISO/TS 14837-32:2015 Part 32: Measurement of dynamic properties of the ground
- ISO 14839 Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings
- * ISO 14839-1:2002 Part 1: Vocabulary
- * ISO 14839-2:2004 Part 2: Evaluation of vibration
- * ISO 14839-3:2006 Part 3: Evaluation of stability margin
- * ISO 14839-4:2012 Part 4: Technical guidelines
- ISO/IEC 14840:1996 Information technology – 12,65 mm wide magnetic tape cartridge for information interchange – Helical scan recording – Data-D3-1 format
- ISO/IEC 14841:1996 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call offer supplementary service
- ISO/IEC 14842:1996 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Do not disturb and do not disturb override supplementary services
- ISO/IEC 14843:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Offer supplementary service
- ISO/IEC 14844:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Do Not Disturb and Do Not Disturb Override supplementary services
- ISO/IEC 14845:1996 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call intrusion supplementary service
- ISO/IEC 14846:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Intrusion supplementary service
- ISO 14855 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions – Method by analysis of evolved carbon dioxide
- * ISO 14855-1:2012 General method
- * ISO 14855-2:2007 Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
- ISO/IEC 14863:1996 Information technology - System-Independent Data Format
- ISO/TR 14873:2013 Information and documentation - Statistics and quality issues for web archiving
- ISO 14879 Implants for surgery – Total knee-joint prostheses
- * ISO 14879-1:2000 Part 1: Determination of endurance properties of knee tibial trays
- ISO 14880 Optics and photonics - Microlens arrays
- * ISO 14880-1:2016 Part 1: Vocabulary and general properties
- * ISO 14880-2:2006 Part 2: Test methods for wavefront aberrations
- * ISO 14880-3:2006 Part 3: Test methods for optical properties other than wavefront aberrations
- * ISO 14880-4:2006 Part 4: Test methods for geometrical properties
- * ISO/TR 14880-5:2010 Part 5: Guidance on testing
- ISO 14881:2001 Integrated optics – Interfaces – Parameters relevant to coupling properties
- ISO/IEC 14882:2017 Programming Languages – C++
- ISO/IEC 14888 Information technology - Security techniques - Digital signatures with appendix
- * ISO/IEC 14888-1:2008 Part 1: General
- * ISO/IEC 14888-2:2008 Part 2: Integer factorization based mechanisms
- * ISO/IEC 14888-3:2016 Part 3: Discrete logarithm based mechanisms
- ISO 14889:2013 Ophthalmic optics – Spectacle lenses – Fundamental requirements for uncut finished lenses
- ISO/TS 14904:2002 Road transport and traffic telematics – Electronic fee collection – Interface specification for clearing between operators
- ISO 14906:2011 Electronic fee collection – Application interface definition for dedicated short-range communication
- ISO/TS 14907 Electronic fee collection – Test procedures for user and fixed equipment
- * ISO/TS 14907-1:2015 Part 1: Description of test procedures
- * ISO/TS 14907-2:2016 Part 2: Conformance test for the on-board unit application interface
- ISO/IEC 14908 Information technology - Control network protocol
- * ISO/IEC 14908-1:2012 Part 1: Protocol stack
- * ISO/IEC 14908-2:2012 Part 2: Twisted pair communication
- * ISO/IEC 14908-3:2012 Part 3: Power line channel specification
- * ISO/IEC 14908-4:2012 Part 4: IP communication
- ISO 14915 Software ergonomics for multimedia user interfaces
- * ISO 14915-1:2002 Part 1: Design principles and framework
- * ISO 14915-2:2003 Part 2: Multimedia navigation and control
- * ISO 14915-3:2002 Part 3: Media selection and combination
- ISO 14917:2017 Thermal spraying - Terminology, classification
- ISO 14949:2001 Implants for surgery – Two-part addition-cure silicone elastomers
- ISO 14963:2003 Mechanical vibration and shock – Guidelines for dynamic tests and investigations on bridges and viaducts
- ISO 14971:2007 Medical devices – Application of risk management to medical devices
- ISO 14972:1998 Sterile obturators for single use with over-needle peripheral intravascular catheters
- ISO 14975:2000 Surface chemical analysis – Information formats
- ISO 14976:1998 Surface chemical analysis – Data transfer format
- ISO/IEC 14977:1996 Information technology – Syntactic metalanguage – Extended BNF
- ISO 14978:2006 Geometrical product specifications – General concepts and requirements for GPS measuring equipment
- ISO 14982:1998 Agricultural and forestry machinery – Electromagnetic compatibility – Test methods and acceptance criteria