List of moments of inertia
Moment of inertia, denoted by, measures the extent to which an object resists rotational acceleration about a particular axis, and is the rotational analogue to mass. Mass moments of inertia have units of dimension ML2. It should not be confused with the second moment of area, which is used in beam calculations. The mass moment of inertia is often also known as the rotational inertia, and sometimes as the angular mass.
For simple objects with geometric symmetry, one can often determine the moment of inertia in an exact closed-form expression. Typically this occurs when the mass density is constant, but in some cases the density can vary throughout the object as well. In general, it may not be straightforward to symbolically express the moment of inertia of shapes with more complicated mass distributions and lacking symmetry. When calculating moments of inertia, it is useful to remember that it is an additive function and exploit the parallel axis and perpendicular axis theorems.
This article mainly considers symmetric mass distributions, with constant density throughout the object, and the axis of rotation is taken to be through the center of mass unless otherwise specified.
Moments of inertia
Following are scalar moments of inertia. In general, the moment of inertia is a tensor, see below.| Description | Figure | Moment of inertia | ||||||||||||||||||||||||||||
| Point mass M at a distance r from the axis of rotation. A point mass does not have a moment of inertia around its own axis, but using the parallel axis theorem a moment of inertia around a distant axis of rotation is achieved. | ||||||||||||||||||||||||||||||
| Two point masses, m1 and m2, with reduced mass μ and separated by a distance x, about an axis passing through the center of mass of the system and perpendicular to the line joining the two particles. | ||||||||||||||||||||||||||||||
| Rod of length L and mass m, rotating about its center. This expression assumes that the rod is an infinitely thin wire. This is a special case of the thin rectangular plate with axis of rotation at the center of the plate, with w = L and h = 0. | ||||||||||||||||||||||||||||||
| Rod of length L and mass m, rotating about one end. This expression assumes that the rod is an infinitely thin wire. This is also a special case of the thin rectangular plate with axis of rotation at the end of the plate, with h = L and w = 0. | ||||||||||||||||||||||||||||||
| Thin circular loop of radius r and mass m. This is a special case of a torus for a = 0, as well as of a thick-walled cylindrical tube with open ends, with r1 = r2 and h = 0. | ||||||||||||||||||||||||||||||
| Thin, solid disk of radius r and mass m. This is a special case of the solid cylinder, with h = 0. That is a consequence of the perpendicular axis theorem. | ||||||||||||||||||||||||||||||
| Thin cylindrical shell with open ends, of radius r and mass m. This expression assumes that the shell thickness is negligible. It is a special case of the thick-walled cylindrical tube for r1 = r2. Also, a point mass m at the end of a rod of length r has this same moment of inertia and the value r is called the radius of gyration. | ||||||||||||||||||||||||||||||
| Solid cylinder of radius r, height h and mass m. This is a special case of the thick-walled cylindrical tube, with r1 = 0. | | |||||||||||||||||||||||||||||
| Thick-walled cylindrical tube with open ends, of inner radius r1, outer radius r2, length h and mass m. | where t = /r2 is a normalized thickness ratio; The above formula is for the xy plane being at the middle of the cylinder. If the xy plane is at the base of the cylinder, then the following formula applies: | |||||||||||||||||||||||||||||
| With a density of ρ and the same geometry note: this is for an object with a constant density | ||||||||||||||||||||||||||||||
| Regular tetrahedron of side s and mass m | ||||||||||||||||||||||||||||||
| Regular octahedron of side s and mass m | ||||||||||||||||||||||||||||||
| Regular dodecahedron of side s and mass m | ||||||||||||||||||||||||||||||
| Regular icosahedron of side s and mass m | ||||||||||||||||||||||||||||||
| Hollow sphere of radius r and mass m. A hollow sphere can be taken to be made up of two stacks of infinitesimally thin, circular hoops, where the radius differs from 0 to r. | ||||||||||||||||||||||||||||||
| Solid sphere of radius r and mass m. A sphere can be taken to be made up of two stacks of infinitesimally thin, solid discs, where the radius differs from 0 to r. | ||||||||||||||||||||||||||||||
| Sphere of radius r2 and mass m, with centered spherical cavity of radius r1. When the cavity radius r1 = 0, the object is a solid ball. When r1 = r2,, and the object is a hollow sphere. | ||||||||||||||||||||||||||||||
| Right circular cone with radius r, height h and mass m | About an axis passing through the tip: About an axis passing through the base: About an axis passing through the center of mass: | |||||||||||||||||||||||||||||
| Right circular hollow cone with radius r, height h and mass m | | |||||||||||||||||||||||||||||
| Torus with minor radius a, major radius b and mass m. | About an axis passing through the center and perpendicular to the diameter: About a diameter: | |||||||||||||||||||||||||||||
| Ellipsoid of semiaxes a, b, and c with mass m | ||||||||||||||||||||||||||||||
| Thin rectangular plate of height h, width w and mass m | ||||||||||||||||||||||||||||||
| Thin rectangular plate of height h, width w and mass m | ||||||||||||||||||||||||||||||
| Solid cuboid of height h, width w, and depth d, and mass m. For a similarly oriented cube with sides of length, | ||||||||||||||||||||||||||||||
| Solid cuboid of height D, width W, and length L, and mass m, rotating about the longest diagonal. For a cube with sides,. | ||||||||||||||||||||||||||||||
| Tilted solid cuboid of depth d, width w, and length l, and mass m, rotating about the vertical axis. For a cube with sides,. | ||||||||||||||||||||||||||||||
| Triangle with vertices at the origin and at P and Q, with mass m, rotating about an axis perpendicular to the plane and passing through the origin. | ||||||||||||||||||||||||||||||
| Plane polygon with vertices P1, P2, P3,..., PN and mass m uniformly distributed on its interior, rotating about an axis perpendicular to the plane and passing through the origin. | ||||||||||||||||||||||||||||||
| Plane regular polygon with n-vertices and mass m uniformly distributed on its interior, rotating about an axis perpendicular to the plane and passing through its barycenter. R is the radius of the circumscribed circle. | ||||||||||||||||||||||||||||||
| An isosceles triangle of mass M, vertex angle 2β and common-side length L | ||||||||||||||||||||||||||||||
Infinite disk with mass distributed in a Bivariate Gaussian distribution on two axes around the axis of rotation with mass-density as a function of the position vectorList of 3D inertia tensorsThis list of moment of inertia tensors is given for principal axes of each object.To obtain the scalar moments of inertia I above, the tensor moment of inertia I is projected along some axis defined by a unit vector n according to the formula: where the dots indicate tensor contraction and the Einstein summation convention is used. In the above table, n would be the unit Cartesian basis ex, ey, ez to obtain Ix, Iy, Iz respectively.
|