M47 Patton


The M47 Patton was an American main battle tank, a development of the M46 Patton mounting an updated turret, and was in turn further developed as the M48 Patton. It was the second American tank to be named after General George S. Patton, commander of the U.S. Third Army during World War II and one of the earliest American advocates of tanks in battle.
The M47 was the U.S. Army's and Marine Corps' primary tank, intended to replace the M26 Pershing and M46 Patton medium tanks. The M47 was widely used by U.S. Cold War allies, both SEATO and NATO countries, and was the only Patton series tank that never saw combat while in US service.
Although similar in appearance to the later M48s and M60s, these were completely new tank designs. Many different M47 Patton models remain in service internationally. The M47 was the last US tank to have a bow-mounted machine gun in the hull.

Design

Although a new power plant corrected the mobility and reliability problems of the M26 Pershing, the subsequently renamed M46 was considered a stopgap solution that would be replaced later by the T42 medium tank. However, after fighting erupted in Korea, the Army decided that it needed the new tank earlier than planned. It was deemed that there was not enough time to finish the development of the T42. The final decision was to produce another interim solution, with the turret of the T42 mounted on the existing M46 hull. Although this interim tank was itself technically immature, Army officials felt the improvements over the M46 in firepower and armor were worth the risk. The composite tank, developed by the Detroit Arsenal, was named the M47 Patton.
In December 1950 the Army awarded a $100 million contract to the American Locomotive Company for the production of 500 tanks. It entered production in 1951. Its main gun was the M36 90 mm gun with an M12 optical rangefinder fitted. The secondary armament consisted of two.30 cal Browning machine guns, one in the bow and one coaxial with the 90mm main gun in the turret, and a.50 caliber Browning M2 on a pintle mount on the turret roof. The M47 was the last American-designed tank to include a bow machine gun. The T42 turret had a larger turret ring than the M26/M46 turret, and featured a needle-nose design, which improved armor protection of the turret front, an elongated turret bustle and storage bin which protruded halfway across the engine deck, and sloped sides to further improve ballistic protection; this gave the turret a decidedly lozenge-shaped profile. It also featured the M12 stereoscopic rangefinder, which was designed to improve first-round hit probability but proved difficult to use; the rangefinder protruded from both sides of the upper turret front, which would be a feature of American tanks until the advent of the M1 Abrams in 1980.
Production at American Locomotive began in July 1951. Logistical and technical issues plagued production almost from the start.
Truman administration policy sought to strengthen American arms makers' resilience to aerial attack by encouraging more decentralized weapons production — away from Detroit. The U.S. curtailed civilian automotive production to boost military production with the onset of the Korean War. As a result, Detroit's newly unemployed automotive workers found little work, while tank manufacturers outside Michigan lacked skilled workers. Truman's policy also counted on civilian factories being able to quickly transition to war-time production. However many factories lacked needed tank production machinery, done away with during World War II demobilization.
A faulty Ordnance Corps-designed hydraulic turret-control mechanism, shared by the M41 Walker Bulldog, kept the tanks from Korea while engineers worked on a fix. Engineers improved production quality controls of the hydraulics by April 1952, and set about correcting M47s sidelined in storage. By then Army officials had scrapped plans to send the tanks to Korea, in favor of providing them to troops stationed in Europe and at home.
The first M47s were not fielded to the 1st and 2nd Armored Divisions until summer 1952. Standardized in May 1952, the M47 Patton's production ran until November 1953; Detroit built 5,481 tanks, and American Locomotive Company produced 3,095, for a total production run of 8,576 M47 Pattons.

Deployment

After the U.S. Army in Germany was equipped with the M47, the first M47s delivered under the Mutual Security Agency program were delivered to Portugal in 1952. In October the agency announced that NATO member nations had agreed to adopt the British Centurion main battle tank and the M47 as standard. By October the At Camp Drum in July, the New Jersey Army National Guard was the first reserve force to train with the tank.
The Marine Corps also fielded M47s starting in late 1952; after the Korean War, all seven Marine tank battalions, three divisional, two reserve training, and two force level, each fielded M47s. But these were soon replaced with M48A1 Pattons and M103 heavy tanks, with the last M47s being retired in 1959.
American Locomotive production was halted in October when the company's ordnance and locomotive divisions went on strike. Production resumed in February when union leaders agreed to a pay raise. In December 1952 the Defense Department ordered cutbacks to M47 and M48 tank production. In November 1953 American Locomotive halted production of the M47 after operators found drive gear defects in Europe. Army officials quickly acknowledged the issue arose from their own expedient decision to use lower grades of steel to circumvent wartime shortages. Chrysler laid off about 1000 workers at Detroit Tank Arsenal when it wrapped up production in November. American Locomotive resumed production in November. The company closed its tank division in June 1954.
With the arrival of the improved M48 Patton in 1953, the M47 was declared "limited standard" in 1955, and examples in tank units were replaced with the M48 series before long. After being declared obsolete in 1957, M46s and M47s were retained in active duty infantry division battlegroup assault gun platoons until replaced with the light truck-mounted SS-10 anti-tank guided missile in the early 1960s. M47s were used by the Reserves for a relatively short time, soon being replaced by early production M48 Patton series tanks; thus, most of the M47s were exported in the late 1950s.
The M47 was widely used by many countries, especially NATO and SEATO allies, including Austria, Belgium, Ethiopia, France, Greece, Portugal, Iran, Italy, Japan, Jordan, Pakistan, Portugal, Saudi Arabia, Somalia, South Korea, Sudan, Spain, Switzerland, Turkey, West Germany, and Yugoslavia. Like the US Army of the time, the West German Bundeswehr also used some of their M47s as interim tank destroyers/assault guns until replaced by the Raketenjagdpanzer 1 tank destroyers armed with SS-11 anti-tank guided missiles in the early 1960s.
U.S. Army M47s remaining in storage were expended as targets. In the 1970s, they were used for the M60A1's 105mm gun with devastating effect. The 105 mm HEAT round would penetrate the frontal armor with ease. Many M47s in like-new condition met their fate in this manner, showing the M60 crews first hand the effects of modern tank weapons on conventional steel armor.

Combat service

Additional equipment

Current operators