Machine tool builder


A machine tool builder is a corporation or person that builds machine tools, usually for sale to manufacturers, who use them to manufacture products. A machine tool builder runs a machine factory, which is part of the machine industry.
The machine tools often make interchangeable parts, which are assembled into subassemblies or finished assemblies, ending up sold to consumers, either directly or through other businesses at intermediate links of a value-adding chain. Alternatively, the machine tools may help make molds or dies, which then make the parts for the assemblies.

Overview

The term "machine tool builder" implies a company that builds machine tools for sale to other companies, who then use them to manufacture subsequent products. Macroeconomically, machine tools are only means to ends ; they are not the ends themselves. Thus it is in the nature of machine tools that there is a spectrum of relationships between their builders, their users, and the end users of the products that they make.
There is always natural potential for the machine tool users to be the same people as the builders, or to be different people who occupy an intermediate position in the value stream. Markets often have some proclivity for circumventing such a position, although the proclivity is often not absolute. Every variant on the spectrum of relationships has found some instances of empirical embodiment; and over the centuries, trends can be seen for which variants predominated in each era, as described below.
Machine tool builders tend not to be in the business of using the machine tools to manufacture the subsequent products ; and product manufacturers tend not to be in the business of building machine tools. In fact, many machine tool builders are not even in the business of building the control system that animates the machine; and makers of controls tend not to be in the machine building business.
For example, FANUC and Siemens make controls that are sold to many machine tool builders. Each segment tends to find that crossing into other segments involves becoming a conglomerate of dissimilar businesses, which is an execution headache that they don't need as long as focusing on a narrower field is often more profitable in net effect anyway. This trend can be compared to the trend in which companies choose not to compete against their own distributors. Thus a software company may have an online store, but that store does not undercut the distributors' stores on price.

History

The machine tool industry began gradually in the early nineteenth century with individual toolmakers who innovated in machine tool design and building. The ones that history remembers best include Henry Maudslay, Joseph Whitworth, Joseph Clement, James Nasmyth, Matthew Murray, Elisha K. Root, Frederick W. Howe, Stephen Fitch, J.D. Alvord, Frederick W. Howe, Richard S. Lawrence, Henry D. Stone, Christopher M. Spencer, Amos Whitney, and Francis A. Pratt.
The industry then grew into the earliest corporate builders such as Brown & Sharpe, the Warner & Swasey Company, and the original Pratt & Whitney company. In all of these cases, there were product manufacturers who started building machine tools to suit their own inhouse needs, and eventually found that machine tools had become product lines in their own right.
In contrast, Colt and Ford are good examples of product manufacturers that made significant advances in machine tool building while serving their own inhouse needs, but never became "machine tool builders" in the sense of having machine tools become the products that they sold. National-Acme was an example of a manufacturer and a machine tool builder merging into one company and selling both the machines and the products that they made. Hyundai and Mitsubishi are chaebol and keiretsu conglomerates, and their interests cover from ore mine to end user.
Until the 1970s, machine tool builder corporations could generally be said to have nationality, and thus it made sense to talk about an American machine tool builder, a German one, or a Japanese one. Since the 1970s, the industry has globalized to the point that assigning nationality to the corporations becomes progressively more meaningless as one travels down the timeline leading up to the present day; currently, most machine tool builders are multinational corporations or conglomerates. With these companies it is enough to say "multinational corporation based in country X", "multinational corporation founded in country X", etc. Subcategories such as "American machine tool builders" or "Japanese machine tool builders" would be senseless because, for example, companies like Hardinge and Yamazaki Mazak today have significant operations in many countries.

Trade associations

Machine tool builders have long had trade associations, which have helped with such tasks as establishing industry standards, lobbying, and training programs. For example, the National Machine Tool Builders' Association was the trade association of U.S. machine tool builders for many decades, and it helped establish standards such as the NMTB machine taper series. It has since been merged into the Association for Manufacturing Technology. Other examples have included CECIMO, the UK's ABMTM, MTTA, and MTA, and the Japan Machine Tool Builders' Association.
Just as machine tool builders have long had trade associations, so have machine tool distributors. Examples have been the American Machine Tool Distributors’ Association and the Japan Machine Tool Trade Association. In recent decades the builders' and distributors' associations have cooperated on shared interests to the extent that some of them have merged. For example, the former NMTBA and AMTDA have merged into the AMT.

Trade shows

Major trade shows of the industry include IMTS and EMO. There are also many smaller trade shows concentrating on specific geographical regions or on specific industries.

Historical studies of machine tool building

In the early 20th century, Joseph Wickham Roe wrote a seminal classic of machine tool history, English and American Tool Builders, which is extensively cited by later works. About 20 years later Roe published a biography of James Hartness that also contains some general history of the industry. In 1947, Fred H. Colvin published a memoir, Sixty Years with Men and Machines, that contains quite a bit of general history of the industry.
L. T. C. Rolt's 1965 monograph, A Short History of Machine Tools, is a widely read classic, as are the series of monographs that Robert S. Woodbury published during the 1960s, which were collected into a volume in 1972 as Studies in the History of Machine Tools.
In 1970, Wayne R. Moore wrote about the Moore family firm, the Moore Special Tool Company, who independently invented the jig borer. Moore's monograph, Foundations of Mechanical Accuracy, is a seminal classic of the principles of machine tool design and construction that yield the highest possible accuracy and precision in machine tools. The Moore firm epitomized the art and science of the tool and die maker.
David F. Noble's Forces of Production is one of the most detailed histories of the machine tool industry from World War II through the early 1980s, relayed in the context of the social impact of evolving automation via NC and CNC. Also in 1984, David A. Hounshell published From the American System to Mass Production, one of the most detailed histories of the machine tool industry from the late 18th century through 1932. It does not concentrate on listing firm names and sales statistics but rather is extremely detailed in exploring the development and spread of practicable interchangeability, and the thinking behind the intermediate steps. It is extensively cited by later works.
In 1989, Holland published a history, When the Machine Stopped, that is most specifically about Burgmaster ; but in telling Burgmaster's story, and that of its acquirer Houdaille, Holland provides a history of the machine tool industry in general between World War II and the 1980s that ranks with Noble's coverage of the same era as a seminal history. It was later republished under the title From Industry to Alchemy.