Mack model EH trucks


The Mack model EH trucks were a family of 4x2 trucks used by the US and British military before and during World War II. They were built in conventional and cab over engine models, and were used as both trucks and semi-tractors. Originally a commercial design, in 1943 a military version became standard.

History

From 1937 the US armed forces had bought Mack's commercial E series in small orders, the EH was the largest model. In 1942 large numbers of modified trucks were supplied under Lend-Lease to Britain and many could be seen carrying the L or H-numbers of the British War Department. They differed from the commercial type by lacking chrome trim and nameplates, and were fitted with a military style cargo body with canvas cover. They were painted olive drab all over. 510 EH, 70 EHU, 140 EHT with semi-trailers ST20, 180 EHUT with semi-trailers ST20 were delivered.
In 1943 a military design version of the EH type was destined mainly for Defense Aid. From the total of 3450 EH produced, 2400 were supplied to Britain.
After the war the E series commercial production continued until 1950.

Engine and driveline

The standard engine was the EN310 6 cylinder L-head petrol engine, a Buda 6DT389 diesel was available. Some modified EH and all military design trucks had an EN354 engine, a Engine displacement| L-head inline 6 cylinder gasoline engine developing Horsepower| at 2800 rpm and of torque at 1150rpm. Some transmissions were direct in 4th and overdrive in 5th gear, while others were direct in 5th. The rear axle was a double-reduction full-floating “banjo” type.

Chassis

The EH had a ladder frame with two beam axles on leaf springs. The military models had two wheelbases, the short for tractors and the long for straight trucks. The variant EHUS had a shorter wheelbase at. They were used as fuel servicing trucks in the US Navy or as wreckers for the USMC. Bus chassis had a wheelbase.
Commercial types had split-rim wheels and hydraulic brakes, military types had disk type wheels and air-brakes. Tires were 9.00x20.

Models

There were four basic models. The EH was a conventional straight truck chassis, EHT was a conventional semi-tractor. The EHU was a C.O.E. straight truck chassis, and the EHUT was a C.O.E. semi-tractor. A C.O.E. can have a longer body, but the engine is harder to work on.
Besides the cargo and semi-tractor, there were fuel and water tankers, van bodies, wreckers, bus chassis, and fire trucks.