Mass attenuation coefficient


The mass attenuation coefficient, or mass narrow beam attenuation coefficient of the volume of a material characterizes how easily it can be penetrated by a beam of light, sound, particles, or other energy or matter. In addition to visible light, mass attenuation coefficients can be defined for other electromagnetic radiation, sound, or any other beam that can be attenuated. The SI unit of mass attenuation coefficient is the square metre per kilogram. Other common units include cm2/g and mL⋅g−1⋅cm−1. Mass extinction coefficient is an old term for this quantity.
The mass attenuation coefficient can be thought of as a variant of absorption cross section where the effective area is defined per unit mass instead of per particle.

Mathematical definitions

Mass attenuation coefficient is defined as
where
When using the mass attenuation coefficient, the Beer–Lambert law is written in alternative form as
where

Mass absorption and scattering coefficients

When a narrow beam passes through a volume, the beam will lose intensity to two processes: absorption and scattering.
Mass absorption coefficient, and mass scattering coefficient are defined as
where
In chemistry, mass attenuation coefficients are often used for a chemical species dissolved in a solution. In that case, the mass attenuation coefficient is defined by the same equation, except that the "density" is the density of only that one chemical species, and the "attenuation" is the attenuation due to only that one chemical species. The actual attenuation coefficient is computed by
where each term in the sum is the mass attenuation coefficient and density of a different component of the solution. This is a convenient concept because the mass attenuation coefficient of a species is approximately independent of its concentration.
A closely related concept is molar absorptivity. They are quantitatively related by

X-rays

Tables of photon mass attenuation coefficients are essential in radiological physics, radiography, dosimetry, diffraction, interferometry, crystallography, and other branches of physics. The photons can be in form of X-rays, gamma rays, and bremsstrahlung.
The values of mass attenuation coefficients are dependent upon the absorption and scattering of the incident radiation caused by several different mechanisms such as
The actual values have been thoroughly examined and are available to the general public through three databases run by National Institute of Standards and Technology :
  1. XAAMDI database;
  2. XCOM database;
  3. FFAST database.

    Calculating the composition of a solution

If several known chemicals are dissolved in a single solution, the concentrations of each can be calculated using a light absorption analysis. First, the mass attenuation coefficients of each individual solute or solvent, ideally across a broad spectrum of wavelengths, must be measured or looked up. Second, the attenuation coefficient of the actual solution must be measured. Finally, using the formula
the spectrum can be fitted using ρ1, ρ2, … as adjustable parameters, since μ and each are functions of wavelength. If there are N solutes or solvents, this procedure requires at least N measured wavelengths to create a solvable system of simultaneous equations, although using more wavelengths gives more reliable data.