Matsumoku


Matsumoku Industrial was a Japanese manufacturing company based in Matsumoto, Nagano, between 1951 and 1987. Established in 1951 as a woodworking and cabinetry firm, Matsumoku is remembered as a manufacturer of guitars and bass guitars, including some Epiphone and Aria guitars.
.

History

In 1951, Matsumoku was founded as Matsumoto Mokko by Mr. Tsukada in Matsumoto, Nagano, Japan. It was a family-owned woodworking business that specialized in building tansu cabinets and butsudan.
Shortly after the World War II, the Singer Corporation had established a Japanese subsidiary, Singer Sewing Machine Company Japan, and set up production facilities in Nagoya. Singer contracted Matsumoku Industrial to build its sewing machine cabinets, and in 1951 Matsumoku became a partially owned subsidiary of Singer Japan. Matsumoku also branched out into building cabinets for manufacturers of televisions and "hi-fi" amplifiers.

Production

In the early 1960s, Matsumoku began to look into other woodworking markets when several subcontracts of Singer were moved to the Philippines and, as it had on its staff several skilled luthiers, ventured into guitar and violin production in 1963. Modest classical guitars, small steel-stringed acoustic guitars, mandolins and violins were built and marketed in the mid-1960s. However, as other Japanese companies were producing similar instruments, Matsumoku set out to distinguish itself by producing high-quality acoustic and electric archtop guitars. Several of Matsumoku's early archtop guitars survive, most owing their basic designs to Hofner, Framus, and Gibson. By the early 1960s, Matsumoku had acquired new mills, lathes and specialized presses and began to increase musical-instrument production. This new equipment, operated by its staff of skilled craftsmen, enabled Matsumoku to realize the mass production of high-quality guitars.
By the early 1970s, Matsumoku had begun using CNC mills, routers, and lathes, one of the first guitar makers to do so. This created a significant economy of scale, allowing the company to rely upon factory automation rather than skilled labor for rough shaping of components and basic assembly tasks. Even so, 60% of the construction process was still done by hand, including planing, fretting, joining, and assembly. This machine-cut yet hand-worked process offered improved profit margins at lower unit prices and yielded high quality instruments with unique character.
Matsumoku produced guitars, or parts of guitars, for Vox, Guyatone, FujiGen Gakki, Kanda Shokai, Hoshino Gakki, Nippon Gakki, Hondo professional series, Aria and Norlin. American owned Unicord contracted Matsumoku to build most of its Univox and Westbury guitars. St. Louis Music imported Matsumoku-built Electra Guitars. J. C. Penney sold Matsumoku-built Skylark guitars through its catalog division. Matsumoku built many early Greco guitars as well as Memphis, Vantage, Westbury, Westminster, C.G.Winner, Cutler, Lyle and Fell. Washburn Guitars contracted with Matsumoku to build some of its electric guitars and basses from 1979 through 1984. Though the names above reflect Matsumoku's involvement, many of the names were later sold to other companies, which made guitars that were completely different in quality and sound.
Although its name began appearing on neck-bolt plates, headstocks, and sound-hole labels in the 1970s, Matsumoku's role in the making of guitars under contract was largely unknown outside of Japan's guitar-making circles. Matsumoku's contract with St. Louis Music, which had marketed Matsumoku-made guitars under the Electra name, was taken over by Unicord, which owned the Westone name, and the guitars Matsumoku built during the resulting transitional phase bear the dual name Electra-Westone.
Matsumoku's final phase as a maker of guitars under contract was making the Westbury, Westminster and Westone brands owned by American importer/marketer Unicord. In 1979, however, when its contract with Matsumoku came to an end, Unicord chose not to renew it but rather to cut costs by moving production to Korea. Thus, once again, Matsumoku found itself in need of work. This time, though, rather than seeking a new distributor, Matsumoku began to self-market its guitars under its own brand name: Vantage.

Aria

Shiro Arai founded Arai and Company in 1953 as an importer of classical guitars. In 1960, Arai contracted Guyatone to manufacture guitars. At the time, Guyatone was one of Japan's leading musical instrument manufacturers. However, when exported to the western United States, the drier American climates caused early Guyatone-produced guitars various problems: bindings became unglued, backs split, and necks broke just below the headstock. Guyatone could not meet Arai's production requirements, and in 1964, Arai and Company contracted for musical instrument manufacturing with Matsumoku.
Arai addressed these issues early on with Matsumoku's management. The solution was to use wood that had been dried for at least two years, stronger glues with longer clamp times, and one feature that remained throughout Matsumoku's production: the 3-piece maple neck.
Besides Matsumoku, Aria had two factories that produced guitars, one of which made classical guitars, and another that made medium-grade and specialty guitars. But the relationship between the two companies was both amicable and symbiotic. Aria focused on sales in both domestic and export markets and provided design development, while Matsumoku devoted its energies to engineering and building guitars and other stringed instruments. Throughout its 22-year business relationship, Aria remained Matsumoku's principal client. Matsumoku often preferred using Aria as its business agent, and many of Matsumoku's contracts were written by Aria with Matsumoku stated or implied as sub-contracted manufacturer.
Arai and Company guitars were briefly labeled Arai, but switched to the familiar Aria around 1966. From the 1975 arrival of design engineer Nobuaki Hayashi currently with Atlansia) onward, however, all Aria guitars were labeled Aria Pro II. Hayashi's pseudonym, "H. Noble", appeared on many of the Aria Pro II instruments he designed. Aria's guitars that followed showed remarkable design innovation and a definitive move away from Gibson and Fender formats. Hayashi is best known as the designer of the Aria Pro II, SB-1000 bass and the Aria Pro II PE-series guitars. Some of these were made with maple bodies, but higher-end models such as the PE1000 with Protomatic pickups and the PE1500 with DiMarzio pickups, had ash bodies. These ash-bodied guitars were produced only in relatively small numbers for the domestic market; most, however, had maple bodies. Some guitars were produced with the urushi finish and, again, these, in both red and brown urushi lacquer, were produced mostly for the domestic market. The vast majority of these have ash bodies, whereas the export models were made mainly of maple.
Matsumoku also manufactured drum kits under the Aria name, initially under licence from Remo, which had identified a gap in the market for low-cost drum kits in the compact 5-piece "rock" configuration as innovated by the Rogers PowerTone range in the early 1970s.

Epiphone

Gibson decided to move Epiphone production to Japan in the early 1970s and chose Aria as its contractor. As a subcontractor to Aria, Matsumoku manufactured most electric Epiphones made in Japan from 1970 through 1986. Models include the solid body ET series the SC series and the Model 1140 as well as Epiphone's archtop electric guitars: 5102T/EA-250, Sheraton, Riviera, Casino, and Emperor.
Early Matsumoku made Epiphone archtops and hollow-body basses had four-point bolt on necks. As production costs of bolt on neck guitars were less, some guitarists regarded them as inferior instruments. However, it was not the neck construction that was inferior. Rather, it was the lack of reinforcement in the neck pocket area, which could enable, that area to act like a hinge, causing future problems with high action due to tension on the body's neck pocket from the strings. Collectors of Matsumoku guitars from this period have often solved this problem by fabricating and installing permanent custom neck shims. Set neck archtop guitars followed in late 1975. Specifications on Epiphone archtops changed throughout the Matsumoku era.
Gibson changed the look and sound of Epiphone's best selling archtop, the Casino, when production shifted to Japan. Upon its introduction in 1964, the Casino was a strong seller with rock guitarists, but sales stalled in the late 1960s. Gibson decided to remarket it toward jazz players and changed the tailpiece to one from a Riviera, and the pickups to mini-humbuckers. The result was a Casino that looked more like a short scale Riviera. The Casino was restored to its 1965 specifications around 1975, about the same time Matsumoku began production of set neck archtops.

Distinguishing characteristics

Many Matsumoku built guitars, including Epiphone archtops, utilized a 3 piece maple neck with the center section's grain oriented 90 degrees from the side wood. This created a very strong neck not prone to splitting or warping. An often used variation of this is the 5 piece neck with two thin trim strips of walnut or ebony separating the 3 sections. Matsumoku made many neck-through-body solid body electric guitars and basses, most with 5 piece necks.
Matsumoku often utilized the Nisshin Onpa company as a subcontractor for its pickups. Some Maxon pickups have Maxon's "M" logo stamped on the back.
The name Matsumoku appeared on the neck bolt plate of some guitars they built. Early Grecos and some 1980s Aria Pro IIs have Matsumoku on the neck bolt plate. Other neck plates were blank or simply had the word "Japan" stamped on them.
Many Matsumoku set neck guitars and basses have the inspector's hon stamped inside the neck pick-up cavity.

End of production

Gibson restructured after being sold by Norlin and began to move its Epiphone production to other Japanese manufacturers and to Korea. By 1986, the home sewing machine market was in heavy decline and Singer was nearly bankrupt. Matsumoku could not afford to buy itself out of Singer and in 1987, closed down.
After Matsumoku ceased operations, Aria continued production of Aria Pro II guitars and basses through its own factories and other manufactures. Some top line and special edition guitars are still manufactured in Japan, however, most Aria guitars are now produced in Korea and China.
Information about Matsumoku's contribution to guitar making is better known now due in large part to the Internet. Matsumoku's products enjoy a strong following among devoted enthusiasts.

Notable players of Matsumoku guitars