They were probably best known for their 'Mega' range of ice skates and most notably the Micron Mega 10-90, Micron Mega 10-70 and Micron Mega 10-50. They invented "Power Clip" technology, which they claimed to give increased power to the skater. The "Power Clip" was a white plastic square attached to the sole of the boot on the inside of the foot and had the first three or four lace holes of the boot in it. The design of the boots made the skater lean forward slightly when skating which company claimed improved balancing of weight when skating backwards. They were often used by ice hockey players that played defence. The 10-50 versions were the mid-range junior skates and 10-70s were the mid-range adult skates. They were comparable to the Daoust 301 or the Bauer 200/300 series and used similar construction materials. The 10-90 model came in two completely different configurations: Street and Pro. Within the Pro version there were two configurations: an early, initial version and a later modified second, final version. The early version of the 10-90 PRO was distinguished by a white chevron on the ankle-quarter area. On the final modified version, the chevron was black and there was a small notch added to the lace hole area between the third and fourth eyelets, intended to improve front to rear ankle movement. Also added was an improved tongue. The Mega 10-90 came in two versions: The retail store "street" version and the specialty store "Pro" version, distinguished by the red stripe down the side of the skate boot. The Pro versions were priced at $350–$400 in the early 1990s, and came with a pro level rear quarter package and a thicker tongue. The Pro version was available with either the one-piece ICM holder and carbon steel blade combo or the TUUK holder that provided the option of using V2 stainless blades or standard stainless steel blades. The V2 blades, which were only available for two years in the early 1990s, were about half the thickness of a standard blade and very similar to that used by Olympic speed skaters. At the front or toe end of the blade, the steel was regular thickness, which the company claimed provided a "kick" when changing direction or starting from a dead stop. Due to high cost to produce these blades and the poor acceptance at the pro level, they were eventually discontinued. The Micron Mega 10-90 Pro version also had an inner boot with soft lambskin leather and memory-gel ankle padding. The 10-90s were available in a wide range of widths as they catered to the high-end player who wanted an exact fit. They were particularly designed for taller, heavier skaters. Micron Mega 10-90 skates were used at various points by such NHL players as Mario Lemieux, Ray Bourque, Cam Neely, Pavel Bure and Bernie Nicholls. The Mega 10-90 Pro version skates remain sought after for play and by collectors 15 years after being discontinued. Nike, Inc. bought out Bauer-Canstar in the late 1990s. The replacement skate for the 10-90 was the Canstar-Bauer Mega Air 90. Bauer did not use the "last" or basic footbead of the original Micron Mega 10-90 in the production of the Bauer Mega Air 90 or the Bauer Air 90.
