Mirage 35


The Mirage 35 is a Canadian sailboat, that was designed by American Robert Perry and first built in 1983.
The boat was built by Mirage Yachts in Canada, but it is now out of production.
The Mirage 35 design was developed from the Mirage 33 of 1982.

Design

The Mirage 35 differs from the very similar Miarge 33 only in fitting a reverse transom, which adds to the length overall, but does not affect the boat's other dimensions.
It is a small recreational keelboat, built predominantly of fiberglass. It has a masthead sloop rig, an internally-mounted spade-type rudder and a fixed fin keel. It displaces and carries of ballast.
The boat has a draft of with the standard keel and mounts a Volvo diesel engine. The fuel tank holds and the fresh water tank has a capacity of.
The boat has a PHRF racing average handicap of 150 with a high of 156 and low of 144. It has a hull speed of hull speed of.

Operational history

In a review Michael McGoldrick wrote, "For all practical purposes, the Mirage 33 and 35 are the same boat. The water line, sail area, beam, draft, and interior layout of these two boats is identical. The main difference is that the Mirage 35 has a reverse transom, weighs a few hundred pounds more, and has an overall length that's two feet longer than the 33 foot model. The 35 footer is also supposed to have been built with a slightly nicer interior. These boats have a fairly large interior which featured 6' 5" of headroom. In their day, the beams of these boats would have been considered slightly wider than average, and this would have been especially true of the 33 foot model."