Misleading graph


In statistics, a misleading graph, also known as a distorted graph, is a graph that misrepresents data, constituting a misuse of statistics and with the result that an incorrect conclusion may be derived from it.
Graphs may be misleading through being excessively complex or poorly constructed. Even when constructed to accurately display the characteristics of their data, graphs can be subject to different interpretation, or unintended kind of data can seemingly and ultimately erroneously be derived.
Misleading graphs may be created intentionally to hinder the proper interpretation of data or accidentally due to unfamiliarity with graphing software, misinterpretation of data, or because data cannot be accurately conveyed. Misleading graphs are often used in false advertising. One of the first authors to write about misleading graphs was Darrell Huff, publisher of the 1954 book How to Lie with Statistics.
The field of data visualization describes ways to present information that avoids creating misleading graphs.

Misleading graph methods

There are numerous ways in which a misleading graph may be constructed.

Excessive usage

The use of graphs where they are not needed can lead to unnecessary confusion/interpretation. Generally, the more explanation a graph needs, the less the graph itself is needed. Graphs do not always convey information better than tables.

Biased labeling

The use of biased or loaded words in the graph's title, axis labels, or caption may inappropriately prime the reader.

Fabricated trends

Similarly, attempting to draw trend lines through uncorrelated data may mislead the reader into believing a trend exists where there is none. This can be both the result of intentionally attempting to mislead the reader, or due to the phenomenon of illusory correlation.

Pie chart

A perspective pie chart is used to give the chart a 3D look. Often used for aesthetic reasons, the third dimension does not improve the reading of the data; on the contrary, these plots are difficult to interpret because of the distorted effect of perspective associated with the third dimension. The use of superfluous dimensions not used to display the data of interest is discouraged for charts in general, not only for pie charts. In a 3D pie chart, the slices that are closer to the reader appear to be larger than those in the back due to the angle at which they're presented.. This effect makes readers less performant in judging the relative magnitude of each slice when using 3D than 2D
In the misleading pie chart, Item C appears to be at least as large as Item A, whereas in actuality, it is less than half as large.
Edward Tufte, a prominent American statistician, noted why tables may be preferred to pie charts in The Visual Display of Quantitative Information:

Tables are preferable to graphics for many small data sets. A table is nearly always better than a dumb pie chart; the only thing worse than a pie chart is several of them, for then the viewer is asked to compare quantities located in spatial disarray both within and between pies – Given their low data-density and failure to order numbers along a visual dimension, pie charts should never be used.

Improper scaling

When using pictograms in bar graphs, they should not be scaled uniformly, as this creates a perceptually misleading comparison. The area of the pictogram is interpreted instead of only its height or width. This causes the scaling to make the difference appear to be squared.
In the improperly scaled pictogram bar graph, the image for B is actually 9 times as large as A.
The perceived size increases when scaling.
The effect of improper scaling of pictograms is further exemplified when the pictogram has 3 dimensions, in which case the effect is cubed.
The graph of house sales is misleading. It appears that home sales have grown eightfold in 2001 over the previous year, wheareas they have actually grown twofold. Besides, the number of sales is not specified.
An improperly scaled pictogram may also suggest that the item itself has changed in size.
Assuming the pictures represent equivalent quantities, the misleading graph makes it appear that there are more bananas because the bananas occupy the most area and are furthest to the right.

Logarithmic scaling

Logarithmic scales are a valid means of representing data. But when used without being clearly labelled as log scales, or when displayed to a reader unfamiliar with them, they can be misleading. Log scales put the data values in terms of a chosen number to a particular power. The base is often e or 10. For example, log scales may give a height of 1 for a value of 10 in the data and a height of 6 for a value of 1,000,000 in the data. Log scales and variants are commonly used, for instance, for the volcanic explosivity index, the Richter scale for earthquakes, the magnitude of stars, and the pH of acidic and alkaline solutions. Even in these cases, the log scale can make the data less apparent to the eye. Often the reason for the use of log scales is that the graph's author wishes to display effects of vastly different scales on the same axis. Without log scales, comparing quantities such as 10 versus 10 becomes visually impractical. A graph with a log scale which was not clearly labelled as such, or a graph with a log scale presented to a viewer who did not have knowledge of logarithmic scales, would generally result in a representation which made data values look of similar size whilst in fact being of widely differing magnitudes. Misuse of a log scale can make vastly different values appear close together. Or it can make small values appear to be negative due to the way in which logarithmic scales represent numbers smaller than the base.
Misuse of log scales may also cause relationships between quantities to appear to be linear whilst those relationships are in fact exponentials or power laws which rise very rapidly towards higher values. It has been stated, although mainly in a humorous way, that "anything looks linear on a log-log plot with thick marker pen".
Both graphs show an identical exponential function of f = 2x. The graph on the left uses a linear scale, showing clearly an exponential trend. The graph on the right however uses a logarithmic scale, which generates a straight line. If the viewer of the graph was not aware of this, the graph would appear to show a linear trend.

Truncated graph

A truncated graph has a y axis that does not start at 0. These graphs can create the impression of important change where there is relatively little change.
While truncated graphs can be used to overdraw differences or to save space, their use is often discouraged. Commercial software such as MS Excel will tend to truncate graphs by default if the values are all within a narrow range, as in this example. To show relative differences in values over time, an index chart can be used. Truncated diagrams will always distort the underlying numbers visually. Several studies found that even if people were correctly informed that the y-axis was truncated, they still overestimated the actual differences, often substantially.
Both of these graphs display identical data; however, in the truncated bar graph on the left, the data appear to show significant differences, whereas in the regular bar graph on the right, these differences are hardly visible.
There are several ways to indicate y-axis breaks:

Axis changes

Changing the y-axis maximum affects how the graph appears. A higher maximum will cause the graph to appear to have less volatility, less growth and a less steep line than a lower maximum.
Changing the ratio of a graph's dimensions will affect how the graph appears.

No scale

The scales of a graph are often used to exaggerate or minimize differences.
The lack of a starting value for the y axis makes it unclear whether the graph is truncated. Additionally, the lack of tick marks prevents the reader from determining whether the graph bars are properly scaled. Without a scale, the visual difference between the bars can be easily manipulated.
Though all three graphs share the same data, and hence the actual slope of the data is the same, the way that the data is plotted can change the visual appearance of the angle made by the line on the graph. This is because each plot has different scale on its vertical axis. Because the scale is not shown, these graphs can be misleading.

Improper intervals or units

The intervals and units used in a graph may be manipulated to create or mitigate the expression of change.

Omitting data

Graphs created with omitted data remove information from which to base a conclusion.
In the scatter plot with missing categories on the left, the growth appears to be more linear with less variation.
In financial reports, negative returns or data that do not correlate a positive outlook may be excluded to create a more favorable visual impression.

3D

The use of a superfluous third dimension, which does not contain information, is strongly discouraged, as it may confuse the reader.

Complexity

Graphs are designed to allow easier interpretation of statistical data. However, graphs with excessive complexity can obfuscate the data and make interpretation difficult.

Poor construction

Poorly constructed graphs can make data difficult to discern and thus interpret.

Extrapolation

Misleading graphs may be used in turn to extrapolate misleading trends.

Measuring distortion

Several methods have been developed to determine whether graphs are distorted and to quantify this distortion.

Lie factor

where
A graph with a high lie factor would exaggerate change in the data it represents, while one with a small lie factor would obscure change in the data. A perfectly accurate graph would exhibit a lie factor of 1.

Graph discrepancy index

where
The graph discrepancy index, also known as the graph distortion index, was originally proposed by Paul John Steinbart in 1998. GDI is calculated as a percentage ranging from −100% to positive infinity, with zero percent indicating that the graph has been properly constructed and anything outside the ±5% margin is considered to be distorted. Research into the usage of GDI as a measure of graphics distortion has found it to be inconsistent and discontinuous, making the usage of GDI as a measurement for comparisons difficult.

Data-ink ratio

The data-ink ratio should be relatively high, otherwise the chart may have unnecessary graphics.

Data density

The data density should be relatively high, otherwise a table may be better suited for displaying the data.

Usage in finance and corporate reports

Graphs are useful in the summary and interpretation of financial data. Graphs allow trends in large data sets to be seen while also allowing the data to be interpreted by non-specialists.
Graphs are often used in corporate annual reports as a form of impression management. In the United States, graphs do not have to be audited, as they fall under .
Several published studies have looked at the usage of graphs in corporate reports for different corporations in different countries and have found frequent usage of improper design, selectivity, and measurement distortion within these reports. The presence of misleading graphs in annual reports have led to requests for standards to be set.
Research has found that while readers with poor levels of financial understanding have a greater chance of being misinformed by misleading graphs, even those with financial understanding, such as loan officers, may be misled.

Academia

The perception of graphs is studied in psychophysics, cognitive psychology, and computational visions.

Books