Musgrave rifle


The Musgrave rifles are a series of bolt-action target and hunting rifles produced in South Africa.
These guns have their roots in target shooting and were designed for full-bore target shooters in an era when surplus war rifles such as the Lee–Enfield, Lee–Metford, P14 and others were used. The Musgrave facility where they were built housed a giant gunsmithing concern. RSA actions and earlier hammer-forged barrels were manufactured at Lyttelton Engineering Works.
By 1989, Musgrave employed 220 people and produced 6,000 hunting rifles per year over a ten model range. Musgrave's product range diversified to include shotguns, sporting equipment, fuel locking devices and other items.
Though Musgrave was an ARMSCOR subsidiary since 1971, the name finally disappeared under Denel control, in August 1996. The end of this era came about when Musgrave's Bloemfontein facility was closed down and some of the equipment and personnel relocated to Lyttelton Engineering Works where hunting rifles under the "Vektor" name were built for a short while, alongside the R4 assault rifle, Z88 pistol and other small armament which forms DENEL's main focus.
The dormant Musgrave name was revived by a private owner and new semi-custom built Musgrave rifles from the town of Ermelo, Mpumalanga, RSA entered the market.
Jul 2009

The Musgrave RSA Target Rifle

The single-shot Musgrave RSA action is based on Mauser's design and feature a controlled feed extractor. The actions have a large flat bedding area underneath and a short case extraction port which contribute to its stiffness. The original Musgrave target rifles were fitted with 26.5" barrels and designated "7,62".
The top part of the fitted hammer forged barrels from Lyttleton, were encased by a handgueard, while M&S 1/3 MOA rear sights were installed. Parker Hale 1/4 MOA rear sights were available as an option. Stocks were made of unimpressive, but dense and strong beech wood. The handguard is absent from later models, which had significantly bulkier fore-ends to allow for an open barrel with effective cooling while still reducing potential fliers due to contact between the free floated barrel and the shooter's fingers. Accurate Musgrave-manufactured button rifled barrels were usually matched with these stocks.
Musgrave triggers were mass-produced and designed to work reliably to around a minimum of 2 pounds of pressure. Various bolt stop configurations exist on these extremely hard actions—it will damage machining tools carelessly applied.
Musgraves were proofed by a recognised Proof-House. The SABS stamped the metalwork on a proofed rifle with two proofmarks in the shape of a capital letter "T" within "Springbok horns", one on the action, the other on the barrel. These two marks are normally in very close proximity to one another, and horizontally aligned. A notable exception is the early Bloemfontein Musgrave RSA Rifle, which carries only one SABS proofmark.
A SABS inspector fired a high pressure round through every rifle manufactured on Musgrave's site and signed off. Musgrave's quality control department did a rigorous functional test on every rifle, testing the trigger, safety catch, firing pin protrusion, extractor and headspace against strict standards while evaluating the rifles accuracy.
The SOUTH AFRICAN BISLEY UNION site states:

Musgrave hunting rifles

;Surplus rifle conversions
Many.303 rifles were available in South Africa after the 2nd Anglo-Boer war, and conversions of these served well as hunting rifles. For plains game, a flatter shooting alternative was found in the 6 mm Musgrave, which is basically a.303 cartridge case with a 6mm projectile. The performance of this calibre is slightly below that of the 243 Win, due to the lower pressure that these actions could handle. In later years, Musgrave had a section focussed solely on these conversions.
;Production Rifles
Three models of Musgrave hunting rifles for which the RSA action served as platform were manufactured from 29 May 1970, namely the
Several other models followed, including:
;.22 Rimfire:
Some Musgraves were exported to Europe and the US, either as complete rifles or components.

Custom rifles

A range of unique rifles from Musgrave's custom shop includes beautiful custom rifles that were built according to customer specifications, usually sporting high quality metal components, beautiful high grade wood, inspiring engraving and metal inlet work, and fine checkering.
The Musgrave Custom Shop housed capable smiths, of which one mainly focussed on barrels and three were engravers.
Historic rifles were refurbished or rebarrelled here and a number of "prototype" hunting rifles built.
Some limited series runs, e.g. a run of "Plezier" Mausers with octagonal barrels, were commissioned. Custom artwork including engraving by Armin Winkler and others appears on the series of 7×57mm rifles commissioned by the war museum to depict different battles.
A number of the talented gunsmiths from this custom shop are still building rifles across South Africa.

Shotguns

Pistols built by Musgrave include: