18 Class WT locomotives were built at Derby Works in England to the design of George Ivatt between 1946 and 1950. They were numbered 1–10 and 50–57. They were a tank engine version of the NCC Class W moguls. A tank engine did not require turning at termini and the LMS had produced a series of successful 2-6-4Ts. Like the LMS Fairburn 2-6-4T built at the same time, they had a hopper bunker and absence of plating ahead of the cylinders. They were based on the LMS Fowler 2-6-4T by Sir Henry Fowler. In December 1962 locomotive No.50 received a boiler from one of the ex-NCC 2-6-0 tender locomotives, the boiler and firebox being overhauled and repaired at Derby. In early 1966 and towards the end of their careers, the Class WT locomotives were involved in working notable traffic. This was on spoil trains that transported fill for motorway construction from the Blue Circlecement works at Magheramorne to Greencastle near Belfast. Three trains of twenty hopper wagons each were made up, with a Class WT locomotive at each end. Each train when filled carried of rock and in all, some 7,600 trains had carried of material by the time the contract ended in May 1970. The last of the Class WT locomotives were officially withdrawn in 1971 the last time one was in traffic being 22 October 1970. This made them the last steam locomotives in mainline operation in the British Isles; Córas Iompair Éireann steam in the Republic of Ireland having ended in 1962 and British Railways steam in Great Britain having finished in 1968.
Preservation
One of these locomotives, No.4, has been preserved by the Railway Preservation Society of Ireland which operates it on special mainline trains. It is currently operational after an overhaul was completed in June 2015.
No. 58 Project
The RPSI was considering the possibility of building a new member of the class to give them a second mainline tank locomotive considering the low availability of turntables on modern day lines. However, a NCC Class W Mogul is being built instead, due to the longer range between coaling and watering allowed by a tender engine.
Technical details
The locomotives were built with many LMS standard features such as a self-cleaning smokebox, rocking firegrate, self-emptying ashpan, side window cab and a simplified footplate together with others which followed NCC practice, such as a water top-feed on a parallel boiler, Dreadnought type vacuum brake gear, Detroit sight feed cylinder lubricator and a cast number plate.
