National Topographic System


The National Topographic System or NTS is the system used by Natural Resources Canada for providing general purpose topographic maps of the country. NTS maps are available in a variety of scales, the standard being 1/50,000 and 1/250,000 scales. The maps provide details on landforms and terrain, lakes and rivers, forested areas, administrative zones, populated areas, roads and railways, as well as other man-made features. These maps are currently used by all levels of government and industry for forest fire and flood control, depiction of crop areas, right-of-way, real estate planning, development of natural resources and highway planning.

Subdivisions

The National Topographic System is split into three major "zones" defined by latitude spans. The "Southern zone" covers latitudes between 40°N and 68°N, the "Arctic zone" covers latitudes between 68°N and 80°N, and the "High Arctic zone" covers latitudes between 80°N and 88°N.
A map sheet is classified by a string containing a number identifying the 1:1,000,000 scale "map series" that contains the sheet, a letter identifying a 1:250,000 scale "map area", and finally a number identifying the 1:50,000 scale map sheet itself.
All map series span four degrees of latitude, but are split differently east-to-west depending on the zones they are located in. Map series in the Southern and Arctic zones span eight degrees of longitude, while those in the High Arctic zone span sixteen degrees of longitude. The NTS designates the southernmost set of map series, from 40 to 44 degrees north latitude, with numbers that end with the digit 0, using 10, 20, 30 and 40. The third row, ending with the digit 2, spans from 2, 12, 22, 32 and so on to 102 off the west coast, while the fourth, fifth, sixth and seventh rows extend furthest west, using 114, 115, 116 and 117.
In the Southern zone, map series are split into sixteen map areas, while in the Arctic and High Arctic zones, they are split into eight. All map areas are in turn split into sixteen map sheets.
Map areas in a series are assigned letters in a boustrophedon pattern starting in the southeastern part of the series. In the Southern zone, the letters run from A through P, while in the Arctic and High Arctic zones, they run from A through H.
Each map area in turn is split into sixteen map sheets, numbered from 1 through 16 in an identical boustrophedon pattern to the map areas.
Each of these 1:50,000 sheets, in turn, was at one time split into eight map sheets, lettered as lower-case a to h, starting at the southeast corner and ending in the northeast corner; these identified 1:25,000 scale maps that were produced from the 1960s to about 1975, then abandoned, and liquidated in the 1980s.
Not all topographic paper maps produced by Natural Resources Canada strictly follow this rectangular grid pattern. Some maps also cover land in an area which would otherwise be covered by an adjacent map sheet, simply because the latter area does not contain enough land in Canada to warrant a separate printing.