Native American flute


The Native American flute is a flute that is held in front of the player, has open finger holes,
and has two chambers: one for collecting the breath of the player and a second chamber which creates sound.
The player breathes into one end of the flute
without the need for an embouchure.
A block on the outside of the instrument
directs the player's breath from the first chamber — called the slow air chamber —
into the second chamber — called the sound chamber.
The design of a sound hole at the proximal end of the sound chamber causes
air from the player's breath to vibrate.
This vibration causes a steady resonance of air pressure
in the sound chamber that creates sound.
Native American flutes comprise a wide range of designs, sizes, and variations — far more varied than most other classes of woodwind instruments.

Names

The instrument is known by many names. Some of the reasons for the variety of names include: the varied uses of the instrument,
the wide dispersal of the instrument across language groups and geographic regions,
legal statutes,
and the Native American name controversy.
Native American names for the flute include:
Alternative English-language names include:
American Indian courting flute,
courting flute,
Grandfather's flute,
Indian flute,
love flute,
Native American courting flute,
Native American love flute,
Native American style flute,
North American flute,
Plains flute,
and Plains Indian courting flute.
Names in other languages include:
By convention, English-language uses of the name of the instrument are capitalized as "Native American flute". This is in keeping with the English-language capitalization of other musical instruments that use a cultural name, such as "French horn".
The use of abbreviations is discouraged.
The prevalent term for a person who plays Native American flutes is "flutist". This term predominates the term "flautist". "Flute maker" is the predominant term for people who "craft" Native American flutes.

Organology

The instrument is classified in the 2011 revision of the Hornbostel–Sachs system by the MIMO Consortium
as 421.23 — Flutes with internal duct formed by an internal baffle plus an external tied-on cover . This HS class also includes the Suling.
Although Native American flutes are played by directing air into one end, it is not strictly an end-blown flute,
since the sound mechanism uses a fipple design
using an external block that is fixed to the instrument.
The use of open finger holes classifies the Native American flute as a simple system flute.

History

There are many narratives about how different Indigenous peoples of the Americas invented the flute. In one narrative, woodpeckers pecked holes in hollow branches while searching for termites; when the wind blew along the holes, people nearby heard its music. Another narrative from the Tucano culture describes
Uakti, a creature with holes in his body that would produce sound when he ran or the wind blew through him.
It is not well known how the design of the Native American flute developed before 1823.
Some of the influences may have been:
It is also possible that instruments were carried from other cultures during
migrations.
Flutes of the Mississippian culture have been found that appear to have the two-chambered design characteristic of Native American flutes. They were constructed of river cane. The earliest such flute is curated by the Museum Collections of the University of Arkansas, Fayetteville. It was recovered in about 1931 by Samuel C. Dellinger and more recently identified as a flute by James A. Rees, Jr. of the Arkansas Archeological Society. The artifact is known colloquially as "The Breckenridge Flute" and was conjectured to date in the range 750-1350 CE.
This conjecture proved to be accurate when, in 2013, a sample from the artifact yielded a date range of 1020-1160 CE.
The earliest extant Native American flute crafted of wood was collected by the Italian adventurer Giacomo Costantino Beltrami in 1823 on his search for the headwaters of the Mississippi River. It is now in the collection of the Museo Civico di Scienze Naturali in Bergamo, Italy.

Construction

Components

The two ends of a Native American flute along the longitudinal axis are called the
head end
and the foot end.
The Native American flute has two air chambers:
the slow air chamber
and the sound chamber.
A plug
inside the instrument separates the slow air chamber from the sound chamber.
The block on the outside of the instrument is a separate part that can be removed.
The block is also called the bird, the fetish, the saddle, or the totem.
The block is tied by a strap onto the nest of the flute.
The block moves air through a flue
from the slow air chamber to the sound chamber.
The block is often in the shape of a bird.
Note that flutes of the Mi'kmaq culture are typically constructed from a separate block, but the block is permanently fixed
to the body of the flute during construction.
Even though these flutes do not have a movable block, they are
generally considered to be Native American flutes.
The precise alignment and longitudinal position of the block is critical to getting the desired sound from the instrument.
The longitudinal position also has a modest effect on the pitches produced by the flute,
giving the player a range of roughly 10-40 cents of pitch adjustment.
The slow air chamber has a mouthpiece and breath hole for the player's breath.
Air flows through the slow air chamber and up the ramp, through the exit hole, and into the flue.
The slow air chamber can serve as a secondary resonator, which can give some flutes a distinctive sound.
The sound chamber contains the sound hole, which creates the vibration of air that causes sound when the airflow
reaches the splitting edge.
The sound hole can also be called the whistle hole, the window, or the true sound hole.
The splitting edge can also be called the cutting edge, the fipple edge, the labium, or the sound edge.
The sound chamber also has finger holes that allows the player to change the
frequency of the vibrating air.
Changing the frequency of the vibration changes the pitch of the sound produced.
The finger holes on a Native American flute are open, meaning that fingers of the player cover the finger hole
.
This use of open finger holes classifies the Native American flute as a simple system flute.
Because of the use of open finger holes, the flutist must be able to reach all the finger holes on the instrument with their fingers,
which can limit the size of the largest flute that a given flutist can play.
The finger holes can also be called the note holes, the playing holes, the tone holes, or the stops.
The foot end of the flute can have direction holes.
These holes affect the pitch of the flute when all the finger holes are covered.
The direction holes also relate to the Four Directions of
East, South, West, and North found in many Native American stories.
The direction holes can also be called the tuning holes or wind holes.
In addition to the Components of the Native American flute diagram shown above with :Image:Native American flute Composite Anatomy.jpg|English-language labels, diagrams are available with labels in
:Image:Native American flute Composite Anatomy Cherokee.jpg|Cherokee,
:Image:Native American flute Composite Anatomy Dutch.jpg|Dutch,
:Image:Native American flute Composite Anatomy Esperanto.jpg|Esperanto,
:Image:Native American flute Composite Anatomy French.jpg|French,
:Image:Indianerflöte Bauweise.jpg|German,
:Image:Native American flute Composite Anatomy Nihongo.jpg|Japanese,
:Image:Native American flute Composite Anatomy Korean.jpg|Korean,
:Image:Flet indiański - anatomia.jpg|Polish,
:Image:Native American flute Composite Anatomy Russian.jpg|Russian,
and
:Image:Native American flute Composite Anatomy Spanish.jpg|Spanish.

Spacer Plate

An alternate design for the sound mechanism uses a spacer plate to create the flue.
The spacer plate sits between the nest area on the body of the flute and the removable block.
The spacer plate is typically held in place by the same strap that holds the block on the instrument.
The splitting edge can also be incorporated into the design of the spacer plate.
The spacer plate is often constructed of metal, but spacer plates have been constructed of wood, bark, and ceramic.
When positioning and securing the removable block with the strap,
the use of a spacer plate provides and additional degree of control over the sound and tuning of the flute.
However, it also adds a degree of complexity when performing the task of securing both the block and the spacer plate.

Plains Style vs. Woodlands Style

Various sources describe attributes of Native American flute that are termed "Plains style" and "Woodlands style".
However, there is no general consensus among the various sources
about what these terms mean.
According to various sources the distinction is based on:

Branch flutes

While many contemporary Native American flutes are crafted from milled lumber, some flutes are crafted from a branch of a tree. The construction techniques vary widely, but some makers of branch flutes will attempt to split the branch down a centerline, hollow out the inside, and then mate the halves back together for the completed flute.

Double and Multiple flutes

A double Native American flute is a type of double flute. It has two sound chambers that can be played simultaneously. The two chambers could have the same length or be different lengths.
The secondary sound chamber can hold a fixed pitch, in which case the term "drone flute" is sometimes used. The fixed pitch could match the fingering of the main sound chamber with all the finger holes covered, or it could match some other pitch on the main sound chamber.
Alternately, various configurations of finger holes on the two sound chambers can be used, in which case terms such as "harmony flute" or "harmonic flute" are sometimes used.
Extending the concept, Native American flutes with three or more chambers have been crafted. The general term "multiple flute" is sometimes used for these designs.

Dimensions

Some Native American flutes constructed by traditional techniques were crafted using measurements of the body.
The length of the flute was the distance from inside of the elbow to tip of the index finger.
The length of the slow air chamber was the width of the fist.
The distance between the sound hole and first finger hole was the width of the fist.
The distance between finger holes would be the width of a thumb.
The distance from the last finger hole to the end of the flute was the width of the fist.
Flute makers currently use many methods to design the dimensions of their flutes.
This is very important for the location of the finger holes, since they control the pitches of the different notes of the instrument. Flute makers may use calculators to design their instruments,
or use dimensions provided by other flute makers.

Materials

Native American flutes were traditionally crafted of a wide range of materials, including
wood,
bamboo, and river cane. Flute makers from indigenous cultures would often use anything that could be converted or made into a long hollow barrel, such as old gun barrels.
Poetic imagery regarding the covenant between flute maker and player
was provided by Kevin Locke in the Songkeepers video:
Contemporary Native American flutes continue to use these materials, as well as plastics, ceramic, glass, and more exotic hardwoods such as ebony, padauk, and teak.
Various materials are chosen for their aromatic qualities, workability, strength and weight, and compatibility with construction materials such as glue and various finishes. Although little objective research has been undertaken, there are many subjective opinions expressed by flute makers and players about the sound qualities associated with the various materials used in Native American flutes.

Physical and Mental Benefits of the flute

Heart Rate Variability

One study that surveyed the physiological effects of
playing Native American flutes
found a significant positive effect on
heart rate variability, a metric that is indicative of resilience to stress.

Music Therapy

The Native American flute is still used today in Music Therapy settings.
Known as Ojibwe music, usage of the flute is extremely beneficial for
hospice, cancer, and cardiac patients to assist in managing anxiety, restlessness, fear, and pain.
Flutes can provide a source of rehabilitation and encourage a sense of accomplishment.
It guides patients in taking a deep breath and using controlled exhalations to blow through the flute,
helping with exercising the lungs.

Ergonomics

Contemporary Native American flutes can take ergonomic considerations into account,
even to the point of custom flute designs for individual flute players.
However, the ergonomic issues related to these instruments are not well-studied and
ergonomic designs are not widespread; one study reported that
47–64% of players reported physical discomfort at least some of the time,
while over 10% of players reported moderate discomfort on an average basis.

Sound and Tuning

The predominant scale for Native American flutes crafted since the mid-1980s is the pentatonic minor scale. The notes of the primary scale comprise the
root,
minor third, perfect fourth, perfect fifth, minor seventh, and the octave.
Recently some flute makers have begun experimenting with different scales, giving players new melodic options.
The pitch standard used by many Native American flutes before the mid-1980s was arbitrary.
However, contemporary Native American flutes are often tuned to a concert pitch standard
so that they can be easily played with other instruments.
The root keys of contemporary Native American flutes span a range of about three and a half octaves, from C2 to A5.
Early recordings of Native American flutes are available from several sources.

Fingering

Native American flutes typically have either five or six finger holes, but any particular instrument may have from zero to seven finger holes. The instrument may include a finger hole covered by the thumb.
The fingerings for various pitches are not standardized across all Native American flutes. However,
many contemporary Native American flutes will play the primary scale using the fingering shown in the adjacent diagram.
While the pentatonic minor scale is the primary scale on most contemporary Native American flutes,
many flutes can play notes of the chromatic scale using cross-fingerings.

Tuning

Native American flutes are available in a wide variety of keys and musical temperaments —
far more than typically available for other woodwind instruments.
Instruments tuned to equal temperament are typically available in all keys within the range of the instrument.
Instruments are also crafted in other musical temperaments, such as just intonation, and pitch standards, such as A4=432 Hz.

The Warble

A distinctive sound of some Native American flutes, particularly traditional flutes, is called the "warble".
The warble sounds as if the flute is vacillating back and forth between distinct pitches. However, it is actually the sound of different harmonic components of same sound coming into dominance at different times.
John W. Coltman, in a detailed analysis of flute acoustics, describes two types of warbles in Native American flutes: One "of the order of 20 Hz" caused by a "nonlinearity in the jet current", and a second type "in which amplitude modulation occurs in all partials but with different phases". The first type is analyzed by Coltman in a controlled setting, but he concluded that analysis of the second type of warble "is yet to be explained".
The warble can be approximated by use of vibrato techniques. The phase shift that occurs between different harmonics can be observed on a spectrograph of the sound of a warbling flute.

Written Music

Written music for the Native American flutes is often in the key of F-sharp minor, although some music is scored in other keys. However, the convention for this music written in F-sharp minor is to use a non-conforming key signature of four sharps, creating what is known as "Nakai tablature".
Note that the use of finger diagrams below the notes that is part a high percentage of written music for the Native American flutes is not necessarily part of Nakai tablature.
The use of a standard key signature for written music that can be used across Native American flutes in a variety of keys classifies the instrument as a transposing instrument.

Music

Extensive ethnographic recordings were made by early anthropologists such as Alice Cunningham Fletcher,
Franz Boas,
Frank Speck,
Frances Densmore,
and Francis La Flesche.
A small portion of these recordings included Native American flute playing.
One catalog lists 110 ethnographic recordings made prior to 1930.
These recordings capture traditional styles of playing the instrument in a sampling of indigenous cultures and settings in which the instrument was used.
However, the legal and ethical issues surrounding access to these early recordings are complex.
Because of incidents of misappropriation of ethnographic materials recorded within their
territories, Indigenous communities today claim a say over whether, how and on what terms
elements of their intangible cultural heritage are studied, recorded, re-used and
represented by researchers, museums, commercial interests and others.
During the period 1930-1960, few people were playing the Native American flute.
However, a few recordings of flute playing during this period are commercially available.
One such recording is by Belo Cozad, a Kiowa flute player who made recordings for the U. S. Library of Congress in 1941.

Revival

During the late 1960s, the United States saw a roots revival of the Native American flute, with a new wave of flutists and artisans such as Doc Tate Nevaquaya, John Rainer, Jr., Sky Walkinstik Man Alone, and Carl Running Deer.
The music of R. Carlos Nakai became popular in the 1980s,
in particular with the release of the album "Canyon Trilogy" in 1989.
His music was representative of a shift in style from a traditional approach to playing the instrument
to incorporate the New-age genre. Mary Youngblood won two Grammy Awards
in the Native American Music category for her Native American flute music
in 2002 and 2006. She remains the only Native American flutist to be distinguished in this way, as the National Academy of Recording Arts and Sciences retired the category in 2011.
Today, Native American flutes are being played and recognized by many different peoples and cultures around the world.

Community Music

The Native American flute has inspired hundreds of informal community music groups which meet periodically to play music and further their interest in the instrument. These groups are known as flute circles.
Several national organizations have formed to provide support to these local flute circles:
The chart below depicts the activity in publicly accessible social media groups specific to the Native American flute. Three domains are shown:
The chart shows an average 39% annual growth rate in aggregate activity from 1998 through 2015. However, note that these statistics do not take into account the change over this period in accessibility to the Internet, use of social media vs. private messages, the use of closed and secret groups on Facebook, and other confounding factors. Despite these limitations, the chart does indicate a substantial rate of growth in activity and interest.

Colors=
id:lightgrey value:gray
id:darkgrey value:gray
id:sfondo value:rgb
id:barra value:rgb
ImageSize = width:650 height:350
PlotArea = left:50 bottom:50 top:30 right:30
DateFormat = x.y
Period = from:0 till:25000
TimeAxis = orientation:vertical
AlignBars = justify
ScaleMajor = gridcolor:darkgrey increment:5000 start:0
ScaleMinor = gridcolor:lightgrey increment:1000 start:0
BackgroundColors = canvas:sfondo
BarData=
bar:1998 text:1998
bar:1999 text:1999
bar:2000 text:2000
bar:2001 text:2001
bar:2002 text:2002
bar:2003 text:2003
bar:2004 text:2004
bar:2005 text:2005
bar:2006 text:2006
bar:2007 text:2007
bar:2008 text:2008
bar:2009 text:2009
bar:2010 text:2010
bar:2011 text:2011
bar:2012 text:2012
bar:2013 text:2013
bar:2014 text:2014
bar:2015 text:2015
PlotData=
color:barra width:16 align:left
bar:1998 from: 0 till:0 color:green
bar:1998 from: 0 till:91 color:red
bar:1998 from: 91 till:91 color:blue
bar:1999 from: 0 till:0 color:green
bar:1999 from: 0 till:1799 color:red
bar:1999 from: 1799 till:1799 color:blue
bar:2000 from: 0 till:0 color:green
bar:2000 from: 0 till:2818 color:red
bar:2000 from: 2818 till:2818 color:blue
bar:2001 from: 0 till:194 color:green
bar:2001 from: 194 till:4297 color:red
bar:2001 from: 4297 till:4297 color:blue
bar:2002 from: 0 till:1359 color:green
bar:2002 from: 1359 till:5783 color:red
bar:2002 from: 5783 till:5783 color:blue
bar:2003 from: 0 till:963 color:green
bar:2003 from: 963 till:6764 color:red
bar:2003 from: 6764 till:6764 color:blue
bar:2004 from: 0 till:1070 color:green
bar:2004 from: 1070 till:7516 color:red
bar:2004 from: 7516 till:7516 color:blue
bar:2005 from: 0 till:936 color:green
bar:2005 from: 936 till:10229 color:red
bar:2005 from: 10229 till:10229 color:blue
bar:2006 from: 0 till:509 color:green
bar:2006 from: 509 till:12998 color:red
bar:2006 from: 12998 till:12998 color:blue
bar:2007 from: 0 till:348 color:green
bar:2007 from: 348 till:11782 color:red
bar:2007 from: 11782 till:11782 color:blue
bar:2008 from: 0 till:473 color:green
bar:2008 from: 473 till:9887 color:red
bar:2008 from: 9887 till:11900 color:blue
bar:2009 from: 0 till:318 color:green
bar:2009 from: 318 till:8266 color:red
bar:2009 from: 8266 till:12354 color:blue
bar:2010 from: 0 till:166 color:green
bar:2010 from: 166 till:7056 color:red
bar:2010 from: 7056 till:13206 color:blue
bar:2011 from: 0 till:95 color:green
bar:2011 from: 95 till:7875 color:red
bar:2011 from: 7875 till:16660 color:blue
bar:2012 from: 0 till:25 color:green
bar:2012 from: 25 till:4823 color:red
bar:2012 from: 4823 till:16235 color:blue
bar:2013 from: 0 till:64 color:green
bar:2013 from: 64 till:3518 color:red
bar:2013 from: 3518 till:14742 color:blue
bar:2014 from: 0 till:0 color:green
bar:2014 from: 0 till:2069 color:red
bar:2014 from: 2069 till:17903 color:blue
bar:2015 from: 0 till:0 color:green
bar:2015 from: 0 till:1085 color:red
bar:2015 from: 1085 till:24391 color:blue
PlotData=
bar:1998 at: 91 fontsize:S text: 0.1 shift:
bar:1999 at: 1799 fontsize:S text: 1.8 shift:
bar:2000 at: 2818 fontsize:S text: 2.8 shift:
bar:2001 at: 4297 fontsize:S text: 4.3 shift:
bar:2002 at: 5783 fontsize:S text: 5.8 shift:
bar:2003 at: 6764 fontsize:S text: 6.8 shift:
bar:2004 at: 7516 fontsize:S text: 7.5 shift:
bar:2005 at: 10299 fontsize:S text: 10.3 shift:
bar:2006 at: 12998 fontsize:S text: 13.0 shift:
bar:2007 at: 11782 fontsize:S text: 11.8 shift:
bar:2008 at: 11900 fontsize:S text: 11.9 shift:
bar:2009 at: 12354 fontsize:S text: 12.3 shift:
bar:2010 at: 13206 fontsize:S text: 13.2 shift:
bar:2011 at: 16660 fontsize:S text: 16.7 shift:
bar:2012 at: 16235 fontsize:S text: 16.2 shift:
bar:2013 at: 14742 fontsize:S text: 14.7 shift:
bar:2014 at: 17903 fontsize:S text: 17.9 shift:
bar:2015 at: 24391 fontsize:S text: 24.4 shift:
TextData=
fontsize:M pos: text:Social media activity in Native American flute groups

For additional statistics, see the flute circle article.

Popular Appeal

The Native American flute has gained popularity among flute players, in large part because of its simplicity.
According to a thesis by Mary Jane Jones:

Flutists and composers

Notable and award-winning Native American flutists include:
R. Carlos Nakai,
Charles Littleleaf,
Joseph Firecrow,
John Two-Hawks,
Kevin Locke,
Aaron White,
Robert Mirabal,
A few classical composers have written for the Native American flute, including
James DeMars,
David Yeagley,
Frank Martinez,
Brent Michael Davids,
Philip Glass,
Jerod Impichchaachaaha' Tate.

Legal Issues

1990 Indian Arts And Crafts Act

The 1990 [|Indian Arts And Crafts Act] of the United States criminalized deceptive product-labeling of goods that are ostensibly made by Native Americans.
In the United States, wrongfully claiming that an artifact is crafted by "an Indian" is a felony offense.
The US Department of the Interior explicitly states on its informational website about the Act that, "Under the Act, an Indian is defined as a member of any
federally or
State recognized Indian Tribe,
or an individual certified as an Indian artisan by an Indian Tribe."
Based on this statue, only a flute fashioned by a person who qualifies as an Indian under the terms of the statue can legally be sold as a "Native American flute" or "American Indian flute".
However, although there is no official public ruling on alternative terms that are acceptable,
it is general practice that any manufacturer or vendor may legally label their work-product by other terms such as "Native American style flute" or "North American flute".
Labels such as "in the style of", or "in the spirit of", or "replica" may also be used.
However, while the Act applies to offering handmade arts and crafts offered to the public for sale, it does not apply to the use of Native American flutes in situations such as performance, workshops, or recording.

Migratory Bird Treaty Act of 1918

The Migratory Bird Treaty Act of 1918 makes it unlawful to use materials from species protected by the Act in a musical instrument.
This statute applies to the eagle-bone whistle, examples of which might or might not be classified as a Native American flute depending on the particulars of their construction.

Documentaries