Octane rating


An octane rating, or octane number, is a standard measure of the performance of an engine or aviation gasoline. The higher the octane number, the more compression the fuel can withstand before detonating. In broad terms, fuels with a higher octane rating are used in high-performance gasoline engines that require higher compression ratios. In contrast, fuels with lower octane numbers are ideal for diesel engines, because diesel engines do not compress the fuel, but rather compress only air and then inject fuel into the air which was heated by compression. Gasoline engines rely on ignition of air and fuel compressed together as a mixture, which is ignited near the end of the compression stroke using electrically activated spark plugs. Therefore, high compressibility of the fuel matters mainly for gasoline engines. Use of gasoline with lower octane numbers may lead to the problem of engine knocking.

Principles

The problem: pre-ignition and knocking

In a normal Otto cycle spark-ignition engine, the air-fuel mixture is heated as a result of being compressed and is then triggered by the spark plug to burn rapidly. During this combustion process, if the unburnt portion of the fuel in the combustion chamber is heated too much, pockets of unburnt fuel may self-ignite before the main flame front reaches them. Shockwaves produced by detonation can cause much higher pressures than engine components are designed for, and can cause a "knocking" or "pinging" sound. Knocking can cause major engine damage if severe.
The most typically used engine management systems found in automobiles today have a knock sensor that monitors if knock is being produced by the fuel being used. In modern computer-controlled engines, the ignition timing will be automatically altered by the engine management system to reduce the knock to an acceptable level.

Isooctane as a reference standard

s are a family of hydrocarbons that are typical components of gasoline. They are colorless liquids that boil around 125 °C. One member of the octane family, isooctane, is used as a reference standard to benchmark the tendency of gasoline or LPG fuels to resist self-ignition.
The octane rating of gasoline is measured in a test engine and is defined by comparison with the mixture of 2,2,4-trimethylpentane and heptane that would have the same anti-knocking capacity as the fuel under test: the percentage, by volume, of 2,2,4-trimethylpentane in that mixture is the octane number of the fuel. For example, gasoline with the same knocking characteristics as a mixture of 90% iso-octane and 10% heptane would have an octane rating of 90. A rating of 90 does not mean that the gasoline contains just iso-octane and heptane in these proportions, but that it has the same detonation resistance properties.
Octane ratings are not indicators of the energy content of fuels.. They are only a measure of the fuel's tendency to burn in a controlled manner, rather than exploding in an uncontrolled manner.
This is important to know when choosing a fuel for a particular engine. Performance is optimized when the lowest octane rated fuel that can be used without detonation is used.
Where the octane number is raised by blending in ethanol, energy content per volume is reduced. Ethanol energy density can be compared with gasoline in heat-of-combustion tables.
It is possible for a fuel to have a Research Octane Number more than 100, because iso-octane is not the most knock-resistant substance available. Racing fuels, avgas, LPG and alcohol fuels such as methanol may have octane ratings of 110 or significantly higher. Typical "octane booster" gasoline additives include MTBE, ETBE, isooctane and toluene. Lead in the form of tetraethyllead was once a common additive, but its use for fuels for road vehicles has been progressively phased out worldwide, beginning in the 1970s.

Measurement methods

Research Octane Number (RON)

The most common type of octane rating worldwide is the Research Octane Number. RON is determined by running the fuel in a test engine with a variable compression ratio under controlled conditions, and comparing the results with those for mixtures of iso-octane and n-heptane. The Compression ratio is varied during the test in order to challenge the fuel's antiknocking tendency as an increase in the compression ratio will increase the chances of knocking.

Motor Octane Number (MON)

Another type of octane rating, called Motor Octane Number, is determined at 900 rpm engine speed instead of the 600 rpm for RON. MON testing uses a similar test engine to that used in RON testing, but with a preheated fuel mixture, higher engine speed, and variable ignition timing to further stress the fuel's knock resistance. Depending on the composition of the fuel, the MON of a modern pump gasoline will be about 8 to 12 octane lower than the RON, but there is no direct link between RON and MON. Pump gasoline specifications typically require both a minimum RON and a minimum MON.

Anti-Knock Index (AKI) or (R+M)/2

In most countries in Europe the "headline" octane rating shown on the pump is the RON, but in Canada, the United States, Brazil, and some other countries, the headline number is the simple mean or average of the RON and the MON, called the Anti-Knock Index, and often written on pumps as /2.

Difference between RON, MON, and AKI

Because of the 8 to 12 octane number difference between RON and MON noted above, the AKI shown in Canada and the United States is 4 to 6 octane numbers lower than elsewhere in the world for the same fuel. This difference between RON and MON is known as the fuel's sensitivity, and is not typically published for those countries that use the Anti-Knock Index labelling system.
See the table in the following section for a comparison.

Observed Road Octane Number (RdON)

Another type of octane rating, called Observed Road Octane Number, is derived from testing gasolines in real world multi-cylinder engines, normally at wide open throttle. It was developed in the 1920s and is still reliable today. The original testing was done in cars on the road but as technology developed the testing was moved to chassis dynamometers with environmental controls to improve consistency.

Octane Index

The evaluation of the octane number by the two laboratory methods requires a standard engine, and the test procedure can be both expensive and time-consuming. The standard engine required for the test may not always be available, especially in out-of-the-way places or in small or mobile laboratories. These and other considerations led to the search for a rapid method for the evaluation of the anti-knock quality of gasoline. Such methods include FTIR, near infrared on-line analyzers and others. Deriving an equation that can be used for calculating the octane quality would also serve the same purpose with added advantages. The term Octane Index is often used to refer to the calculated octane quality in contradistinction to the research or motor octane numbers. The octane index can be of great service in the blending of gasoline. Motor gasoline, as marketed, is usually a blend of several types of refinery grades that are derived from different processes such as straight-run gasoline, reformate, cracked gasoline etc. These different grades are considered as one group when blending to meet final product specifications. Most refiners produce and market more than one grade of motor gasoline, differing principally in their anti-knock quality. The ability to predict the octane quality of the blends prior to blending is essential, something for which the calculated octane index is specially suited.

Aviation gasoline octane ratings

s used in piston aircraft engines common in general aviation have a slightly different method of measuring the octane of the fuel. Similar to an AKI, it has two different ratings, although it is referred to only by the lower of the two. One is referred to as the "aviation lean" rating and is the same as the MON of the fuel up to 100. The second is the "aviation rich" rating and corresponds to the octane rating of a test engine under forced induction operation common in high-performance and military piston aircraft. This utilizes a supercharger, and uses a significantly richer fuel/air ratio for improved detonation resistance.
The most commonly used current fuel, 100LL, has an aviation lean rating of 100 octane, and an aviation rich rating of 130.

Examples

The RON/MON values of n-heptane and iso-octane are exactly 0 and 100, respectively, by the definition of octane rating. The following table lists octane ratings for various other fuels.
FuelRONMONAKI or /2
hexadecane< −30
n-octane−20−17−18.5
n-heptane 000
diesel fuel15–25
2-methylheptane2323.823
n-hexane2526.026
1-pentene34
2-methylhexane4446.445.2
3-methylhexane55.0
1-heptene60
n-pentane6261.962
requirement for a typical two-stroke outboard motor696567
Pertamina "Premium" in Indonesia887883
Pertamina "Pertalite" in Indonesia90
"Plus 91" in Costa Rica91
"Súper" in Costa Rica95
"Regular gasoline" in Japan 90
n-butanol927183
Neopentane 80.2
n-butane9490.192
Isopentane 90.3
"Regular Gasoline/Petroleum" in Australia, New Zealand, Canada and the United States91-9282-8387
Pertamina "Pertamax" in Indonesia928287
"Shell Super" in Indonesia, "Total Performance 92" in Indonesia92
2,2-dimethylbutane93.4
2,3-dimethylbutane94.4
"Mid-Grade Gasoline" in the United States94-9584-8589-90
"YPF Super" in Argentina958490
"Super/Premium" in New Zealand and Australia958590
"Aral Super 95" in Germany, "Aral Super 95 E10" in Germany958590
"Shell V-Power" in Indonesia, "Total Performance 95" in Indonesia, "Shell FuelSave " in Malaysia95
"EuroSuper" or "EuroPremium" or "Regular unleaded" in Europe, "SP95" in France, "Super 95" in Belgium9585-8690-91
"Premium" or "Super unleaded" gasoline in US 9787-8892-93
"Shell V-Power 97" in Malaysia and Chile97
"Premium Gasoline" in the United States96-9886-8891-93
"IES 98 Plus" in Italy, "Aral SuperPlus 98" in Germany, Pertamina "Pertamax Turbo" in Indonesia98
"YPF Infinia" in Argentina988793
"Corriente " in Colombia91.57081
"Extra " in Colombia957987
"SuperPlus" in Germany988893
"Shell V-Power 98", "Caltex Platinum 98 with Techron", "Esso Mobil Synergy 8000" and "SPC LEVO 98" in Singapore, "BP Ultimate 98/Mobil Synergy 8000" in New Zealand, "SP98" in France, "Super 98" in Belgium, Great Britain, Slovenia and Spain9889-9093-94
"Shell V-Power Nitro+ 99" "Tesco Momentum 99" In the United Kingdom998793
Pertamina "Pertamina Racing Fuel" in Indonesia1008693
"Premium" gasoline in Japan, "IP Plus 100" in Italy, "Tamoil WR 100" in Italy, "Shell V-Power Racing" in Australia - discontinued July 2008100
"Shell V-Power" in Italy and Germany1008894
"Eni Blu Super +" in Italy1008794
"isooctane" 100100100
"Petron Blaze 100 Euro 4M" in Philippines and Malaysia100
"San Marco Petroli F-101" in Italy 101
benzene101
2,5-Dimethylfuran101.388.194.7
Petro-Canada "Ultra 94" in Canada101.58894
Aral Ultimate 102 in Germany1028895
Gulf Endurance 102 Racing Fuel 10293-9497-98
ExxonMobil Avgas 10099.5
Petrobras Podium in Brazil1028897
E85 gasoline102-10585-8794-96
i-butane10297.6100
"BP Ultimate 102" - now discontinued10293-9497-98
t-butanol1039197
2,3,3-trimethylpentane106.199.4103
ethane108
ethanol108.689.799.15
methanol108.788.698.65
2,2,3-trimethylpentane109.699.9105
propane11297105
ethylbenzene11299106
isopropylbenzene 112102107
2,2,3-trimethylbutane112.1101.3106
VP C16 Race Fuel117118117.5
isopropanol11898108
1-propanol11898108
xylene118115116.5
methane120120120
toluene121107114
hydrogen> 130

Effects

Higher octane ratings correlate to higher activation energies: the amount of applied energy required to initiate combustion. Since higher octane fuels have higher activation energy requirements, it is less likely that a given compression will cause uncontrolled ignition, otherwise known as autoignition or detonation.
Because octane is a measured and/or calculated rating of the fuel's ability to resist autoignition, the higher the octane of the fuel, the harder that fuel is to ignite and the more heat is required to ignite it. The result is that a hotter ignition spark is required for ignition. Creating a hotter spark requires more energy from the ignition system, which in turn increases the parasitic electrical load on the engine. The spark also must begin earlier in order to generate sufficient heat at the proper time for precise ignition. As octane, ignition spark energy, and the need for precise timing increase, the engine becomes more difficult to "tune" and keep "in tune". The resulting sub-optimal spark energy and timing can cause major engine problems, from a simple "miss" to uncontrolled detonation and catastrophic engine failure.
The other rarely-discussed reality with high-octane fuels associated with "high performance" is that as octane increases, the specific gravity and energy content of the fuel per unit of weight are reduced. The net result is that to make a given amount of power, more high-octane fuel must be burned in the engine. Lighter and "thinner" fuel also has a lower specific heat, so the practice of running an engine "rich" to use excess fuel to aid in cooling requires richer and richer mixtures as octane increases.
Higher-octane, lower-energy-dense "thinner" fuels often contain alcohol compounds incompatible with the stock fuel system components, which also makes them hygroscopic. They also evaporate away much more easily than heavier, lower-octane fuel which leads to more accumulated contaminants in the fuel system. Its typically the and the compounds in the fuel that have the most detrimental effects on the engine fuel system components, as such acids corrode many metals used in gasoline fuel systems.
During the compression stroke of an internal combustion engine, the temperature of the air-fuel mix rises as it is compressed, in accordance with the ideal gas law. Higher compression ratios necessarily add parasitic load to the engine, and are only necessary if the engine is being specifically designed to run on high-octane fuel. Aircraft engines run at relatively low speeds and are "undersquare". They run best on lower-octane, slower-burning fuels that require less heat and a lower compression ratio for optimum vaporization and uniform fuel-air mixing, with the ignition spark coming as late as possible in order to extend the production of cylinder pressure and torque as far down the power stroke as possible. The main reason for using high-octane fuel in air-cooled engines is that it is more easily vaporized in a cold carburetor and engine and absorbs less intake air heat which greatly reduces the tendency for carburetor icing to occur.
With their reduced densities and weight per volume of fuel, the other obvious benefit is that an aircraft with any given volume of fuel in the tanks is automatically lighter. And since many airplanes are flown only occasionally and may sit unused for weeks or months, the lighter fuels tend to evaporate away and leave behind fewer deposits such as "varnish". Aircraft also typically have dual "redundant" ignition systems which are nearly impossible to tune and time to produce identical ignition timing so using a lighter fuel that's less prone to autoignition is a wise "insurance policy". For the same reasons, those lighter fuels which are better solvents are much less likely to cause any "varnish" or other fouling on the "backup" spark plugs.
Because of the high cost of unleaded, high-octane avgas, and possible increased range before refueling, some general aviation pilots attempt to save money by tuning their fuel-air mixtures and ignition timing to run "lean of peak". Additionally, the decreased air density at higher altitudes and temperatures requires leaning for the most power. In almost all general aviation piston engines, the fuel mixture is directly controlled by the pilot, via a knob and cable or lever similar to the throttle control. Leaning must be done carefully, as some combinations of fuel mixture and throttle position can cause detonation and/or pre-ignition, in the worst case destroying the engine within seconds. Pilots are taught in primary training to avoid settings that produce the highest exhaust gas temperatures, and run the engine either "rich of peak" or "lean of peak" as either will keep the fuel-air mixture from detonating prematurely.

Regional variations

The selection of octane ratings available at filling stations can vary greatly between countries.