Olympic-size swimming pool
An Olympic-size swimming pool conforms to regulated dimensions that are large enough for international competition. This type of swimming pool is used in the Olympic Games, where the race course is in length, typically referred to as "long course", distinguishing it from "short course" which applies to competitions in pools that are in length. If touch panels are used in competition, then the distance between touch panels should be either 25 or 50 metres to qualify for FINA recognition. This means that Olympic pools are generally oversized, to accommodate touch panels used in competition.
An Olympic-size swimming pool is used as a colloquial unit of volume, to make approximate comparisons to similarly sized objects or volumes. It is not a specific definition, as there is no official limit on the depth of an Olympic pool. The value has an order of magnitude of 1 mega liter.
Specifications
specifications for an Olympic-size pool are as follows:Physical property | Specified value |
Length | 50 m |
Width | |
Depth | minimum, recommended. |
Number of lanes | 10 |
Lane width | |
Water temperature | |
Light intensity | minimum 1500 lux |
Volume | , assuming a nominal depth of. in cubic units. About 2 acre-feet. |
There must be two spaces wide outside lanes 1 and 8. The length of must be between the touch pads at the end of each lane, if they are used. If starting blocks are used, then there must be a minimum depth of from between from the end of the pool to at least from the end of the pool. At all other points, the minimum depth is. If the pool is used for Olympic Games or World Championships, then the minimum depth is increased to.
long course swimming pool standard.
At FINA's 2009 Congress, rules were approved for 10-lane course for competition, as an alternative to the more traditional 8-lane course.