Open-pan salt making


Open-pan salt making is a method of salt production wherein salt is extracted from brine using open pans.
Virtually all European domestic salt is obtained by solution mining of underground salt formations although some is still obtained by the solar evaporation of sea water.

Types of Open-Pan Salt Production

Salt is made in two ways traditionally. Rock salt is mined from the ground. The other type known as white salt is made by the evaporation of brine. Brine is obtained in several ways. Wild brine streams, occurring from the natural solution of rock salt by ground water, can come to the surface as natural brine springs or can be pumped up to the surface at well, shafts or boreholes. Artificial brine is obtained through solution mining of rock salt with fresh water and is known as ‘controlled brine pumping’. A Bastard Brine used to be made by allowing fresh water to run through abandoned rock salt mines. A Salt-on-Salt process strengthens brine by dissolving rock salt, and/ or, crystal salt in weak brine or sea water prior to evaporation. Solar Evaporation uses the sun to strengthen and evaporate sea water trapped on the sea-shore to make sea salt crystals, or to strengthen and evaporate brine sourced from natural springs where it is made into white salt crystals.
This led to three types of salt production all of which used a variation of the open-pan salt method:
Coastal salt production. The process involved solar evaporation of seawater, followed by artificial evaporation of salt using the open-pan technique in structures known as ‘salterns’. Inland salt production. The process used brine from natural brine streams flowing over buried salt deposits that was pumped up from the ground and evaporated using the open-pan technique. Salt Refining. This was a large-scale salt industry developed in coastal locations, based on a combination of inland salt mining and coastal salt production. Referred to as salt refining or salt-on-salt the process it combined weak brine from seawater with mined rock salt, and evaporated the brine into a white salt.

Inland Open-Pan Salt Production

Open-pan salt production was confined to a few locations where geological conditions preserved layers of salt beneath the ground. Only four complexes of inland open-pan salt works now survive in the world: Lion Salt Works, Cheshire, United Kingdom; Royal Saltworks at Arc-et-Senans, Salins-les-Bains, France; Saline Luisenhall, Göttingen, Germany; and the Colorado Salt Works, USA.
The earliest examples of pans used in the solution mining of salt date back to prehistoric times and the pans were made of ceramics known as briquetage and Cheshire VCP, a coarse low-fired pottery. In Britain these materials began to be identified from the early 1980s in the Marches and later in Northern England
The Romans introduced small pans made from lead using wood as a fuel. In Britain they established towns for salt production at Droitwich in Worcestershire, and Nantwich, Middlewich and Northwich in Cheshire. In the early Middle Ages these developed into the 'wich' towns of Cheshire. Small 'wich' houses containing several lead pans to evapourate the brine into salt, clustered around brine springs within each of the towns. The open-pan process continued largely unchanged throughout the medieval period. A 17th-century German wood-cut by Georgius Agricola shows the process in detail. Excavated evidence has uncovered wooden rakes to draw salt crystals to the side of the pan, and conical wicker baskets in which the wet salt was drained and dried.
By the 17th century the pans started to be made from iron, firstly in pans by. William Brownrigg writing in 1748 in his ‘Book of Common Salt’, shows a wood-cut of one of these salt-making pans. The change from lead to iron coincided with a change from wood to coal for the purpose of heating the brine. Gradually the pans increased in size Christoph Chrysel writing in 1773 in his ‘Remarkable and very useful Information about the present Salt Works and Salt pans in England’ noted salt pans that were wide and long and deep. Brine would be pumped into the pans, and concentrated by the heat of the fire burning underneath. As crystals of salt formed these would be raked out and more brine added.
By the 19th century the open-pan salt process had reached its zenith in Britain. Two principal regions of production existed, Worcestershire and Cheshire. Brine shafts were sunk to the level of the brine stream that flowed over the natural rock salt or halite. Brine was pumped from the ground using wind and later, steam-driven beam engines and redistributed to large iron pans.
These fell into two categories: Smaller fine pans were and about wide and about deep. They were housed in pan houses and had associated stove houses. The salt was evaporated in the pan at a high temperature of around. This produced higher quality grades of salt including 'Butter Salt', 'Dairy Salt', 'Calcutta Salt' and Lagos Salt'. After about six hours the salt would crystallise out of the brine solution and fall to the base of the pan. It was then the job of the lumpman to rake-up the salt and skim it into wooden tubs to create lumps, hence the name. The lumps would then be sent to the stove house or 'hothouse' to dry. Here the lumps would be piled up and the recycled heat from the fires beneath the pans used to heat the room before exhausting through a chimney. The salt lumps would be 'lofted' or passed up to a warehouse above by a man called the lofter. The lumps would be sold known as 'hand-it' lumps or processed in a crushing mill and then bagged.
The second larger common or fishery pans were long x wide x deep and were built outside. The pans were usually heated by coal and were controlled by a fireman. The larger pans would be heated at a much lower temperature between for several days or even weeks. This would produce a much denser crystal with a variety of sizes known as common or fishery salt. Common salt was used for a variety of reasons but included the chemical industry. Fishery salt was used in the packing and processing of fish. The salt would not be made into lumps but instead was skimmed and turned out onto the wooden platforms around the pans> It was then barrowed in large wooden store houses.

Occupations in an Open-Pan Salt Works

The following are historical names given to occupations in open pan salt works, primarily in Cheshire, England.