The OCO-2 satellite was built by Orbital Sciences Corporation, based around the LEOStar-2 bus. The spacecraft is being used to study carbon dioxide concentrations and distributions in the atmosphere. OCO-2 was ordered after the original OCO spacecraft failed to achieve orbit. During the first satellite's launch atop a Taurus-XL in February 2009, the payload fairing failed to separate from around the spacecraft and the rocket did not have sufficient power to enter orbit with its additional mass. Although a Taurus launch was initially contracted for the reflight, the launch contract was cancelled after the same malfunction occurred on the launch of the Glory satellite two years later. United Launch Alliance launched OCO-2 using a Delta II rocketat the beginning of a 30-second launch window at 09:56 UTC on 2 July 2014. Flying in the 7320-10C configuration, the rocket launched from Space Launch Complex 2W at Vandenberg Air Force Base. The initial launch attempt on 1 July at 09:56:44 UTC was scrubbed at 46 seconds on the countdown clock due to a faulty valve on the water suppression system, used to flow water on the launch pad to dampen the acoustic energy during launch. OCO-2 joined the A-train satellite constellation, becoming the sixth satellite in the group. Members of the A-train fly very close together in sun-synchronous orbit, to make nearly simultaneous measurements of Earth. A particularly short launch window of 30 seconds was necessary to achieve a proper position in the train. As of it was in an orbit with a perigee of, an apogee of and a 98.2° inclination. The mission is expected to cost, including design, development, launch and operations.
Column measurements
Rather than directly measuring concentrations of carbon dioxide in the atmosphere, OCO-2 records how much of the sunlight reflected off the Earth is absorbed by molecules in an air column. OCO-2 makes measurements in three different spectral bands over four to eight different footprints of approximately each. About 24 soundings are collected per second while in sunlight and over 10% of these are sufficiently cloud free for further analysis. One spectral band is used for column measurements of oxygen, and two are used for column measurements of carbon dioxide. In the retrieval algorithm measurements from the three bands are combined to yield column-averaged dry-air mole fractions of carbon dioxide. Because these are dry-air mole fractions, these measurements do not change with water content or surface pressure. Because the molecular oxygen content of the atmosphere is well known to be 20.95%, oxygen is used as a measure of the total dry air column. To ensure these measurements are traceable to the World Meteorological Organization, OCO-2 measurements are carefully compared with measurements by the Total Carbon Column Observing Network.
Data products
Mission data are provided to the public by the NASA Goddard Earth Science Data and Information Services Center. The Level 1B data product is the least processed and contains records for all collected soundings. The Level 2 product contains estimates of the column-averaged dry-air mole fractions of carbon dioxide, among other parameters such as surface albedo and aerosol content. The Level 3 product consists of global maps of carbon dioxide concentrations developed by OCO-2 scientists.
