Out Of Phase Stereo


Out Of Phase Stereo is an audio technique which manipulates the phase of a stereo audio track, to isolate or remove certain components of the stereo mix. It works on the principle of phase cancellation, in which two identical but inverted waveforms summed together will "cancel the other out".

Process

When a sine wave is mixed with one of identical frequency but opposite amplitude, the combined result is silence. A two-channel stereo recording contains a number of waveforms; sounds that are panned to the extreme left or right will contain the greatest difference in amplitude between the two channels, while those towards the centre will contain the smallest. A mix of the left channel with the polar inverse of the right channel will reduce centre-panned sounds towards silence, while preserving those towards the extremities.
In practice, the OOPS technique can be performed by inverting the polarity of one speaker or signal lead. It can also be performed using digital audio software by inverting one of the channels of a stereo audio waveform, and then summing both channels together to create a single mono channel.

Applications in music

This technique has been previously used to eliminate vocals in a stereo track to create crude karaoke tracks, or generate surround channels from a stereo source, such as in Dolby Pro Logic. It has also been used in the recording process to include tracks that were only audible once an OOPS technique was applied. This feature can be observed in several of the Beatles' stereo albums. Australian band Cinema Prague recorded a single track Meldatype that contained two songs played simultaneously, one of which was only audible after an OOPS technique was applied.