The oxygen-burning process is a set of nuclear fusion reactions that take place in massive stars that have used up the lighter elements in their cores. Oxygen-burning is preceded by the neon-burning process and succeeded by the silicon-burning process. As the neon-burning process ends, the core of the star contracts and heats until it reaches the ignition temperature for oxygen burning. Oxygen burning reactions are similar to those of carbon burning; however, they must occur at higher temperatures and densities due to the larger Coulomb barrier of oxygen. Oxygen in the core ignites in the temperature range of ×109 K and in the density range of ×109 g/cm3. The principal reactions are given below, where the branching ratios assume that the deuteron channel is open : Near 2×109 K, the oxygen-burning reaction rate is approximately 2.8×10−1233, where T9 is the temperature in billion kelvins. Overall, the major products of the oxygen-burning process are 28Si, 32,33,34S, 35,37Cl, 36,38Ar, 39,41K, and 40,42Ca. Of these, 28Si and 32S constitute 90% of the final composition. The oxygen fuel within the core of the star is exhausted after 0.01–5 years, depending on the star's mass and other parameters. The silicon-burning process, which follows, creates iron, but this iron cannot react further to create energy to support the star. During the oxygen-burning process, proceeding outward, there is an oxygen-burning shell, followed by a neon shell, a carbon shell, a helium shell, and a hydrogen shell. The oxygen-burning process is the last nuclear reaction in the star's core which does not proceed via the alpha process.
Pre-oxygen burning
Although 16O is lighter than neon, neon burning occurs before oxygen burning, because 16O is a doubly-magic nucleus and hence extremely stable. Compared to oxygen, neon is much less stable. As a result, neon burning occurs at lower temperatures than 16O + 16O. During neon burning, oxygen and magnesium accumulate in the core of the star. At the onset of oxygen burning, oxygen in the stellar core is plentiful due to the helium-burning process 12C, carbon-burning process20Ne, 12C, and neon-burning process. The reaction 12C16O has a significant effect on the reaction rates during oxygen burning, as it produces large quantities of 16O.
Convectively bounded flames and off-center oxygen ignition
For stars with masses greater than 10.3 solar masses, oxygen ignites in the core or not at all. Similarly, for stars with a mass of less than 9 solar masses oxygen ignites in the core or not at all. However, in the 9–10.3 solar mass range, oxygen ignites off-center. For stars in this mass range neon-burning occurs in a convective envelope rather than at the core of the star. For the particular example of a 9.5 solar mass star, the neon-burning process takes place in an envelope of approximately 0.252 solar masses off center. From the ignition flash, the neon convective zone extends further out to 1.1 solar masses with a peak power around 1043 erg/s. After only a month, the power declines to about 1042 erg/s and stays at this rate for about 10 years. After this phase, the neon in the shell is depleted, resulting in greater inward pressure on the star. This raises the shell's temperature to 1.65 billion kelvins. This results in a neon-burning, convectively-bound flame front that moves toward the core. The motion of the flame is what eventually leads to oxygen-burning. In approximately 3 years, the flame's temperature reaches about 1.83 billion kelvins, enabling the oxygen-burning process to commence. This occurs around 9.5 years before the iron core develops. Similarly to the beginning of neon-burning, off-center oxygen-burning commences with another flash. The convectively burning flame then results from both neon and oxygen burning as it advances towards the core, while the oxygen-burning shell continuously shrinks in mass.
Neutrino losses
During the oxygen-burning process, energy loss due to neutrino emission becomes relevant. Due to the large energy loss, oxygen must burn at temperatures higher than a billion kelvins in order to maintain a radiation pressure strong enough to support the star against gravity. Further, become significant when the matter density is high enough. Due to these factors, the timescale of oxygen burning is much shorter for heavy, dense stars.
Explosive oxygen burning
The oxygen-burning process can occur under hydrostatic and under explosive conditions. The products of explosive oxygen burning are similar to those in hydrostatic oxygen burning. However, stable oxygen burning is accompanied by a multitude of electron captures, while explosive oxygen burning is accompanied by a significantly greater presence of photodisintegration reactions. In the temperature range of ×109 K, photodisintegration and oxygen fusion occur with comparable reaction rates.
