Ozone Enzo


The Ozone Enzo is a French single-place two-liner competition paraglider that was designed by Luc Armant and produced by Ozone Gliders. In 2020 it remained in production as the Enzo 3.

Design and development

The Enzo was designed as a competition glider. Until 2011, top level competition paragliders used to compete in an "open class", a class of paragliders that didn't require certification except for a mandatory load test of the lines. This resulted in very fast, but unsafe paragliders. After a series of fatal accidents, multiple national paragliding organizations made EN 926 certifications mandatory for wings used in competitions, essentially banning the open class. Manufacturers were now tasked with creating competition wings that would get an EN certification while still performing well. Ozone's take on this was the Enzo, with the name not only being a nod to Enzo Ferrari, but also a partial anagram of the company's name, and the 'EN' certification it achieved.
The Enzo and its variants dominated the paragliding competition scene that followed the end of the open class, with the only major competitors being the Gin Boomerang and the Niviuk Icepeak.. This trend continued throughout the 2010 years, the 2019 paragliding world championship saw 83 of 150 pilots flying an Enzo 3, with only two of the top 20 pilots flying something else.
The design has progressed through three generations of models as of 2020, the original Enzo and then Enzo 2 and 3, each improving on the last. The models are each named for their relative size.
The Enzo 3 is made from Dominico DOKDO 30D MF / Porcher 7000 E71 cloth on the upper surface, with Dominico DOKDO 30D MF / Porcher 7000 E71 on the lower wing surface. The ribs are Porcher 9017 E29 / Porcher 7000 E91. The upper lines are Edelrid 8000U 130/090/070/050/025kg, with the middle and lower lines all Edelrid 8000U.

Specifications (Enzo 3 L)