Paithani


Paithani is a variety of sari, named after the Paithan town in Aurangabad Maharashtra state where the saree was first handmade. Present day Yeola town in Nashik, Maharashtra is the largest manufacturer of Paithani. Made from very fine silk, it is considered as one of the most expensive saris in India.
It is one of the most famous saris in India.It is also considered to be made from the finest silk in India.
Paithani is characterised by borders of an oblique square design, and a pallu with a Peacock design. Plain as well as spotted designs are available. Among other varieties, single colored and kaleidoscope-colored designs are also popular. The kaleidoscopic effect is achieved by using one color for weaving lengthwise and another for weaving width wise.

Specialty of Paithani

A pattan is a gold and silk sari. In the revival of Paithani weaving, the production was oriented towards export requirements, while saris were produced only for sophisticated buyers. Paithani evolved from a cotton base to a silk base. Silk was used in weft designs and in the borders, whereas cotton was used in the body of the fabric. Present day Paithani has no trace of cotton. There was a time when silk was imported from China. Now Yeola and Paithan buy silk from Bangalore.

Technical details

Paithani is a sari made of silk and zari. It is a plain weave, with weft figuring designs according to the principles of tapestry. Traditionally, Paithanis had a coloured, cotton muslin field that often contained considerable supplementary zari patterning. However, in the 19th century, silk fields were also woven.

Materials used

There are three types of silk threads used:
This raw silk is cleansed with caustic soda, dyed in the requisite shades, the threads are carefully separated. Khari zari costs about Rs. 1800 for 250 grams.
Golden threads are obtained from Surat, the quality being 1200 yard per tola. Gold threads are used in double and one of the finest varieties so much so that the closely woven surface looks like a mirror. The texture of the fabric is fairly compact with about 160 ends and 170 picks per inch.
Zari is a metallic yarn, made of pure silver. Originally, zari was manufactured in Yeola; Surat now being another zari-producing center. Initially, zari used in making Paithani was drawn from pure gold. However, silver is the affordable substitute today.

Material assembly

20-22 denier-organized silk is used in warp, while twofold, very lightly twisted 30-32 silk is used for weft. The warp yarn cost Rs. 2900-3200 per kg whereas weft yarn costs Rs. 2400-3000 per kg. A single sari may weigh from 1.45 kg or more depending upon the weight of the silk and zari used. The warp is usually made in the peg or drums warping process and is tied in ball form at the back of loom. It is usually made for 2 pieces of sari and is about 11.5 meters in length. While coloured silk is mostly used in figure work, the solid border have extra weft figuring threads. The weft for borders and body being different, three shuttle weaving is adopted, two for border and one for plain body. The border therefore appears as separately woven and then stitched to the body of the sari. Some times a separate pallu warp is twisted on the body. The end piece has fine silk. Warp threads are only of zari forming a golden ground upon which angular, brightly coloured silk designs are woven in the interlocked weft, producing a tapestry effect.

Motifs

Sari

Due to proximity to the Ajanta caves, the influence of the Buddhist paintings can be seen in the woven Paithani motifs:
Small motifs like circles, stars, kuyri, rui phool, kalas pakhhli, chandrakor, clusters of 3 leaves, were very common for the body of the sari.

Pallu

The weavers of Yeola dye yarns themselves. Yarn is purchased from Bangalore.
The dominant traditional colours of vegetable dyes included:

Dyeing

  1. The kali/vakhar is brought from Bangalore which is a bundle of silk threads ultimately known as one thok.
  2. The raw material is dipped in hot water and diluted in khar, for about 15 mins.
  3. The material is then squeezed by putting a rod in between the kali to remove the excess of impurities and again dipped in cold water for about 2-3 times.
  4. The dye bath is prepared in which the proportion varies according to the hues and shapes
  5. The kali is dipped in the dye bath, removed, and dried completely. This is repeated 2 to 3 times.
  6. It is then washed in cold water to make it much smoother and lustrous.
  7. After the dyeing process is completed, the silk threads are wounded upon the Asari with a very smooth touch which is done by the women. A Rahat was also used for wounding but since it was very much time consuming. They started using the machines made up of the cycle wheel which is less time consuming.
  8. From the asari, the silk threads are transferred on a kandi.
  9. The silk threads are finally set onto the loom.

    Loom

It takes approximately one day to set the silk threads on the loom. "Tansal" is used to put the "wagi". The "pavda" works like the paddle to speed up the weaving. The "jhatka" is used to push the "kandi" from one side to the other. "Pushthe" is used in designing the border of Paithani in which it is punched according to design application. "Pagey" are tied to the loom. The threads are then passed through "fani".
There are two types of motion:
  1. Shedding — dividing the warp sheet or shed into two layers, one above the other for the passage of shuttle with the weft threads.
  2. Picking — passing a pick of weft from one selvage of a cloth through the warp threads.
  3. Beating — dividing the last pick through the fell of cloth with the help of slay fixed on the reel.
  1. Take up motion — taking up the cloth when being woven and winding it on the roller.
  2. Let off motion — letting the warp wound on a warp beam, when the cloth is taken up on the cloth roller beam.
Taking up and letting off the warp are done simultaneously.

Weaving

Paithani saris are silks in which there is no extra weft forming figures. The figuring weave was obtained by a plain tapestry technique. There are three techniques of weaving;
Weaving could take between 18 and 24 months, depending upon the complexity of the design. Today there are many weavers who are working for the revival of this treasured weave.

Borders and the pallu

In the days of Peshwas, the borders and the pallu were made of pure gold mixed with copper to give it strength. The proportion was 1 kg of gold to 1 tola of copper. The combination was spun into a fine wire called the zari. In recent times, zari is made of silver, coated with gold plating. The borders are created with interlocked weft technique either with coloured silk or zari. In the border woven with a zari, ground coloured silk patterns are added as supplementary weft inlay against the zari usually in the form of flower or a creeping vine.
Two types of border are the Narali and the Pankhi.
Even if a very good weaver has woven the main body, a master weaver is needed for the intricate inlay border paths. The borders and the pallu are woven in zari regardless of the colour of the sari.

Types of paithani

Paithani can be classified by three criteria: motifs, weaving, and colours.

Motif