Power, root-power, and field quantities


A power quantity is a power or a quantity directly proportional to power, e.g., energy density, acoustic intensity, and luminous intensity. Energy quantities may also be labelled as power quantities in this context.
A root-power quantity is a quantity such as voltage, current, sound pressure, electric field strength, speed, or charge density, the square of which, in linear systems, is proportional to power. The term root-power quantity was introduced in the ; it replaces and deprecates the term field quantity.

Implications

It is essential to know which category a measurement belongs to when using decibels for comparing the levels of such quantities. A change of one bel in the level corresponds to a 10× change in power, so when comparing power quantities x and y, the difference is defined to be 10×log10 decibel. With root-power quantities, however the difference is defined as 20×log10 dB. In linear systems, these definitions allow the distinction between root-power quantities and power quantities to be ignored when specifying changes as levels: an amplifier can be described as having "3 dB" of gain without needing to specify whether voltage or power are being compared; for a given linear load, such an increase will result in a 3 dB increase in both the sound pressure level and the sound power level at a given location near the speaker. Conversely, when ratios cannot be identified as either power or root-power quantities, the units neper and decibel cannot be sensibly used.
In the analysis of signals and systems using sinusoids, field quantities and root-power quantities may be complex-valued.

"Root-power quantity" vs. "field quantity"

In justifying the deprecation of the term "field quantity" and instead using "root-power quantity" in the context of levels, ISO 80000 draws attention to the conflicting use of the former term to mean a quantity that depends on the position, which in physics is called a field. Such a field is often called a field quantity in the literature, but is called a field here for clarity. Several types of field meet the definition of a root-power quantity, whereas others do not. Conversely, not every root-power quantity is a field.