RACER IV


RACER IV was a component of some of the first hydrogen bombs made by the United States during the 1950s. It was named after the snake of the same name as it was customary for Los Alamos to name primary devices after snakes and insects. RACER was the second fusion-boosted fission device type incorporating the principles tested first with the BOOSTER in the Greenhouse Item. It was initially intended to be the first stage for all but two of the devices tested in the Castle series. The shots intended to make use of it were Romeo, Union, and Yankee, which tested weapon systems aiming to ensure emergency capability, as well as shots Koon and Echo which were to test more exotic "next generation" systems. Its reliability issues ruled it out as a primary in the emergency capability devices, whose proper operation was imperative. Nevertheless it was fielded as primary to the relatively low risk Nectar with satisfactory performance, and to the highly innovative Koon with disastrous effects.
The RACER was developed in 1953 at Los Alamos, was DT gas-boosted and used a TOM initiator for internal initiation. The boosting capsule was made of steel and was internally lined with copper, a standardisation derived from the Booster Ball tested in the Item test. Inside the capsule, the TOM initiator was nested with a caltrop-like steel mounting. This method of assembly of the TOM initiator was known as sealed initiator, doing away with the mounting bracket employed in earlier pure-fission designs. Several RACER cores were proof-fired during Upshot–Knothole with mock-up secondary stages as shots Nancy with DT gas boosting, Badger with deuterium-only gas boosting, and a redesigned core as shot Simon with DT gas boosting. In its finalised, RACER IV configuration, two kilograms of HEU were added to the initial composite core design. According to Chuck Hansen, during the Upshot-Knothole tests RACER exhibited inconsistent yield, varying from 23 kilotons in the Badger and 24 kilotons in the Nancy shot, to 43 kilotons in the Simon shot ; the yields lay outside the predicted range of 35-40 kilotons. Concomitant to stringent yield predictability and reproducibility requirements, the design's bizarre yields meant that as a primary, RACER did not furnished the proper quantity and strength of x-rays and neutrons to implode and initiate respectively the secondary stage. Both x-ray and neutron fluxes were products of the fission process and the degree of fission in the RACER cores varied unpredictably as shown by the yield variability. The unpredictable neutron flux had a catastrophic impact to the TX-22 program, as the MORGENSTERN prototype fizzled and its sister project RAMROD was canceled due to the poor performance of RACER IV.