In the context of mobile radiocommunication systems, RF planning is the process of assigning frequencies, transmitter locations and parameters of a wireless communications system to provide sufficient coverage and capacity for the services required. Cellular, trunked, Wi-Fi, or MANET radios, while each unique in modeling, still depend upon these fundamental aspects. The RF plan of a communication system has two objectives: coverage and capacity. Coverage relates to the geographical footprint within the system that has sufficient RF signal strength to provide for a call/data session. Capacity relates to the capability of the system to sustain a given number of participants. Capacity and coverage are interrelated. To improve coverage, capacity has to be sacrificed, while to improve capacity, coverage will have to be sacrificed The RF Planning process consists of four major stages.
Phase 1: initial radio link budgeting
The first level of the RF planning process is a budgetary level. It uses the RF link budget along with a statistical propagation model to approximate the coverage area of the planned sites and to eventually determine how many sites are required for the particular RF communication system. The statistical propagation of the model does not include terrain effects and has a slope and intercept value for each type of environment. Two essential inputs at this level are simple radio transceiver characteristics and 'flat' map of the area. This fairly simplistic approach allows for a quick analysis of the number of sites that may be required to cover a certain area. Following is a typical list of outputs produced at this stage:
Estimated number of sites.
Phase 2: detailed RF propagation modelling
The second level of the RF Planning process relies on a more detailed propagation model. Automatic planning tools are often employed in this phase to perform detailed predictions. The propagation model takes into account the characteristics of the selected antenna, the terrain, and the land use and land clutter surrounding each site. This requires a precise and accurate characterization of every transceiver and detailed, three-dimensional model of the terrain. Since these factors are considered, this propagation model provides a better estimate of the coverage of the sites than the initial statistical propagation model. Thus, its use, in conjunction with the RF link budget, produces a more accurate determination of the number of sites required. Following is a typical list of outputs produced at this stage:
The third phase of the RF planning process incorporates further detail into the RF plan. This stage includes items such as collecting drive data to be used to tune or calibrate the propagation prediction model, predicting the available data throughout each site, fine tuning of parameter settings. This process is required in the deployment of the system or in determining service contract based coverage. Following is a typical list of outputs produced at this stage:
The final phase of the RF planning process involves continuous optimisation of the RF plan to accommodate for changes in the environment or additional service requirements. This phase starts from initial network deployment and involves collecting measurement data on a regular basis that could be via drive testing or centralised collection. The data is then used to plan new sites or to optimize the parameter settings of existing sites.
