Rhombicuboctahedron


In geometry, the rhombicuboctahedron, or small rhombicuboctahedron, is an Archimedean solid with eight triangular and eighteen square faces. There are 24 identical vertices, with one triangle and three squares meeting at each one. The polyhedron has octahedral symmetry, like the cube and octahedron. Its dual is called the deltoidal icositetrahedron or trapezoidal icositetrahedron, although its faces are not really true trapezoids.

Names

in Harmonices Mundi named this polyhedron a rhombicuboctahedron, being short for truncated cuboctahedral rhombus, with cuboctahedral rhombus being his name for a rhombic dodecahedron. There are different truncations of a rhombic dodecahedron into a topological rhombicuboctahedron: Prominently its rectification, the one that creates the uniform solid, and the rectification of the dual cuboctahedron, which is the core of the dual compound.
It can also be called an expanded or cantellated cube or octahedron, from truncation operations on either uniform polyhedron.

Geometric relations

There are distortions of the rhombicuboctahedron that, while some of the faces are not regular polygons, are still vertex-uniform. Some of these can be made by taking a cube or octahedron and cutting off the edges, then trimming the corners, so the resulting polyhedron has six square and twelve rectangular faces. These have octahedral symmetry and form a continuous series between the cube and the octahedron, analogous to the distortions of the rhombicosidodecahedron or the tetrahedral distortions of the cuboctahedron. However, the rhombicuboctahedron also has a second set of distortions with six rectangular and sixteen trapezoidal faces, which do not have octahedral symmetry but rather Th symmetry, so they are invariant under the same rotations as the tetrahedron but different reflections.
The lines along which a Rubik's Cube can be turned are, projected onto a sphere, similar, topologically identical, to a rhombicuboctahedron's edges. In fact, variants using the Rubik's Cube mechanism have been produced which closely resemble the rhombicuboctahedron.
The rhombicuboctahedron is used in three uniform space-filling tessellations: the cantellated cubic honeycomb, the runcitruncated cubic honeycomb, and the runcinated alternated cubic honeycomb.

Dissection

The rhombicuboctahedron can be dissected into two square cupolae and a central octagonal prism. A rotation of one cupola by 45 degrees creates the pseudo­rhombi­cubocta­hedron. Both of these polyhedra have the same vertex figure: 3.4.4.4.
There are three pairs of parallel planes that each intersect the rhombicuboctahedron in a regular octagon. The rhombicuboctahedron may be divided along any of these to obtain an octagonal prism with regular faces and two additional polyhedra called square cupolae, which count among the Johnson solids; it is thus an elongated square orthobicupola. These pieces can be reassembled to give a new solid called the elongated square gyrobicupola or pseudorhombicuboctahedron, with the symmetry of a square antiprism. In this the vertices are all locally the same as those of a rhombicuboctahedron, with one triangle and three squares meeting at each one, but are not all identical with respect to the entire polyhedron, since some are closer to the symmetry axis than others.

Rhombicuboctahedron

Pseudorhombicuboctahedron

Orthogonal projections

The rhombicuboctahedron has six special orthogonal projections, centered, on a vertex, on two types of edges, and three types of faces: triangles, and two squares. The last two correspond to the B2 and A2 Coxeter planes.
Centered byVertexEdge
3-4
Edge
4-4
Face
Square-1
Face
Square-2
Face
Triangle
Solid
Wireframe
Projective
symmetry
Dual

Spherical tiling

The rhombicuboctahedron can also be represented as a spherical tiling, and projected onto the plane via a stereographic projection. This projection is conformal, preserving angles but not areas or lengths. Straight lines on the sphere are projected as circular arcs on the plane.

Pyritohedral symmetry

A half symmetry form of the rhombicuboctahedron,, exists with pyritohedral symmetry, , as Coxeter diagram, Schläfli symbol s2, and can be called a cantic snub octahedron. This form can be visualized by alternatingly coloring the edges of the 6 squares. These squares can then be distorted into rectangles, while the 8 triangles remain equilateral. The 12 diagonal square faces will become isosceles trapezoids. In the limit, the rectangles can be reduced to edges, and the trapezoids become triangles, and an icosahedron is formed, by a snub octahedron construction,, s.

Algebraic properties

Cartesian coordinates

for the vertices of a rhombicuboctahedron centred at the origin, with edge length 2 units, are all the even permutations of
If the original rhombicuboctahedron has unit edge length, its dual strombic icositetrahedron has edge lengths

Area and volume

The area A and the volume V of the rhombicuboctahedron of edge length a are:

Close-packing density

The optimal packing fraction of rhombicuboctahedra is given by
It was noticed that this optimal value is obtained in a Bravais lattice by. Since the rhombicuboctahedron is contained in a rhombic dodecahedron whose inscribed sphere is identical to its own inscribed sphere, the value of the optimal packing fraction is a corollary of the Kepler conjecture: it can be achieved by putting a rhombicuboctahedron in each cell of the rhombic dodecahedral honeycomb, and it cannot be surpassed, since otherwise the optimal packing density of spheres could be surpassed by putting a sphere in each rhombicuboctahedron of the hypothetical packing which surpasses it.

In the arts

The 1495 Portrait of Luca Pacioli, traditionally attributed to Jacopo de' Barbari, includes a glass rhombicuboctahedron half-filled with water, which may have been painted by Leonardo da Vinci.
The first printed version of the rhombicuboctahedron was by Leonardo and appeared in Pacioli's Divina proportione.
A spherical 180° × 360° panorama can be projected onto any polyhedron; but the rhombicuboctahedron provides a good enough approximation of a sphere while being easy to build. This type of projection, called Philosphere, is possible from some panorama assembly software. It consists of two images that are printed separately and cut with scissors while leaving some flaps for assembly with glue.

Objects

The Freescape games Driller and Dark Side both had a game map in the form of a rhombicuboctahedron.
The "Hurry-Scurry Galaxy" and "Sea Slide Galaxy" in the videogame Super Mario Galaxy have planets in the similar shape of a rhombicuboctahedron.
Sonic the Hedgehog 3's Icecap Zone features pillars topped with rhombicuboctahedra.
During the Rubik's Cube craze of the 1980s, at least two twisty puzzles sold had the form of a rhombicuboctahedron.

Related polyhedra

The rhombicuboctahedron is one of a family of uniform polyhedra related to the cube and regular octahedron.

Symmetry mutations

This polyhedron is topologically related as a part of sequence of cantellated polyhedra with vertex figure, and continues as tilings of the hyperbolic plane. These vertex-transitive figures have reflectional symmetry.

Vertex arrangement

It shares its vertex arrangement with three nonconvex uniform polyhedra: the stellated truncated hexahedron, the small rhombihexahedron, and the small cubicuboctahedron.

Rhombicuboctahedron

Small cubicuboctahedron

Small rhombihexahedron

Stellated truncated hexahedron

Rhombicuboctahedral graph

In the mathematical field of graph theory, a rhombicuboctahedral graph is the graph of vertices and edges of the rhombicuboctahedron, one of the Archimedean solids. It has 24 vertices and 48 edges, and is a quartic graph Archimedean graph.