Roman metallurgy
and metal working had been known to the people of modern Italy since the Bronze Age. By 53 BC, Rome had expanded to control an immense expanse of the Mediterranean. This included Italy and its islands, Spain, Macedonia, Africa, Asia Minor, Syria and Greece; by the end of the Emperor Trajan's reign, the Roman Empire had grown further to encompass parts of Britain, Egypt, all of modern Germany west of the Rhine, Dacia, Noricum, Judea, Armenia, Illyria, and Thrace. As the empire grew, so did its need for metals.
Central Italy itself was not rich in metal ores, leading to necessary trade networks in order to meet the demand for metal. Early Italians had some access to metals in the northern regions of the peninsula in Tuscany and Cisalpine Gaul, as well as the islands Elba and Sardinia. With the conquest of Etruria in 275 BC and the subsequent acquisitions due to the Punic Wars, Rome had the ability to stretch further into Transalpine Gaul and Iberia, both areas rich in minerals. At the height of the Empire, Rome exploited mineral resources from Tingitana in north western Africa to Egypt, Arabia to North Armenia, Galatia to Germania, and Britannia to Iberia, encompassing all of the Mediterranean coast. Britannia, Iberia, Dacia, and Noricum were of special significance, as they were very rich in deposits and became major sites of resource exploitation.
There is evidence that after the middle years of the Empire there was a sudden and steep decline in mineral extraction. This was mirrored in other trades and industries.
One of the most important Roman sources of information is the Naturalis Historia of Pliny the Elder. Several books of his encyclopedia cover metals and metal ores, their occurrence, importance and development.
Types of metal used
Many of the first metal artifacts that archaeologists have identified have been tools or weapons, as well as objects used as ornaments such as jewellery. These early metal objects were made of the softer metals; copper, gold, and lead in particular, as the metals either as native metal or by thermal extraction from minerals, and softened by minimal heat. While technology did advance to the point of creating surprisingly pure copper, most ancient metals are in fact alloys, the most important being bronze, an alloy of copper and tin. As metallurgical technology developed, more metals were intentionally included in the metallurgical repertoire.By the height of the Roman Empire, metals in use included: silver, zinc, iron, mercury, arsenic, antimony, lead, gold, copper, tin. As in the Bronze Age, metals were used based on many physical properties: aesthetics, hardness, colour, taste/smell, timbre, aversion to corrosion, weight, and other factors. Many alloys were also possible, and were intentionally made in order to change the properties of the metal e.g. the alloy of predominately tin with lead would harden the soft tin, to create pewter, which would prove its utility as cooking and tableware.
Technology
The earliest metal manipulation was probably hammering, where copper ore was pounded into thin sheets. Beneficiation, or the process of ’making better’ could be carried out on the ore or after melting, where the prills of metal could be hand picked from the cooled slag. Melting beneficiated metal also allowed early metallurgists to use moulds and casts to form shapes of molten metal. Many of the metallurgical skills developed in the Bronze Age were still in use during Roman times. Melting—the process of using heat to separate slag and metal, smelting—using a reduced oxygen heated environment to separate metal oxides into metal and carbon dioxide, roasting—process of using an oxygen rich environment to isolate sulphur oxide from metal oxide which can then be smelted, casting—pouring liquid metal into a mould to make an object, hammering—using blunt force to make a thin sheet which can be annealed or shaped, and cupellation—separating metal alloys to isolate a specific metal—were all techniques which were well understood. However, the Romans provided few new technological advances other than the use of iron and the cupellation and granulation in the separation of gold alloys.While native gold is common, the ore will sometimes contain small amounts of silver and copper. The Romans utilised a sophisticated system to separate these precious metals. The use of cupellation, a process developed before the rise of Rome, would extract copper from gold and silver, or an alloy called electrum. In order to separate the gold and silver, however, the Romans would granulate the alloy by pouring the liquid, molten metal into cold water, and then smelt the granules with salt, separating the gold from the chemically altered silver chloride. They used a similar method to extract silver from lead.
While Roman production became standardised in many ways, the evidence for distinct unity of furnace types is not strong, alluding to a tendency of the peripheries continuing with their own past furnace technologies. In order to complete some of the more complex metallurgical techniques, there is a bare minimum of necessary components for Roman metallurgy: metallic ore, furnace of unspecified type with a form of oxygen source and a method of restricting said oxygen, a source of fuel, moulds and/or hammers and anvils for shaping, the use of crucibles for isolating metals, and likewise cupellation hearths.
Mechanisation
There is direct evidence that the Romans mechanised at least part of the extraction processes. They used water power from water wheels for grinding grains and sawing timber or stone, for example. A set of sixteen such overshot wheels is still visible at Barbegal near Arles dating from the 1st century AD or possibly earlier, the water being supplied by the main aqueduct to Arles. It is likely that the mills supplied flour for Arles and other towns locally. Multiple grain mills also existed on the Janiculum hill in Rome.Ausonius attests the use of a water mill for sawing stone in his poem Mosella from the 4th century AD. They could easily have adapted the technology to crush ore using tilt hammers, and just such is mentioned by Pliny the Elder in his Naturalis Historia dating to about 75 AD, and there is evidence for the method from Dolaucothi in South Wales. The Roman gold mines developed from c. 75 AD. The methods survived into the medieval period, as described and illustrated by Georgius Agricola in his De Re Metallica.
They also used reverse overshot water-wheel for draining mines, the parts being prefabricated and numbered for ease of assembly. Multiple set of such wheels have been found in Spain at the Rio Tinto copper mines and a fragment of a wheel at Dolaucothi. An incomplete wheel from Spain is now on public show in the British Museum.
Output
The invention and widespread application of hydraulic mining, namely hushing and ground-sluicing, aided by the ability of the Romans to plan and execute mining operations on a large scale, allowed various base and precious metals to be extracted on a proto-industrial scale only rarely matched until the Industrial Revolution.The most common fuel by far for smelting and forging operations, as well as heating purposes, was wood and particularly charcoal, which is nearly twice as efficient. In addition, coal was mined in some regions to a fairly large extent: Almost all major coalfields in Roman Britain were exploited by the late 2nd century AD, and a lively trade along the English North Sea coast developed, which extended to the continental Rhineland, where bituminous coal was already used for the smelting of iron ore. The annual iron production at Populonia alone accounted for an estimated 2,000 to 10,000 tons.
| Output per annum | Comment | |
| Iron | 82,500 t | Based on estimate of iron production at 1.5 kg per head in Roman Britain, extrapolated to population size of 55 million for entire empire |
| Copper | 15,000 t | Largest preindustrial producer. |
| Lead | 80,000 t | Largest preindustrial producer. |
| Silver | 200 t | At its peak around the mid-2nd century AD, Roman stock is estimated at 10,000 t, five to ten times larger than the combined silver mass of medieval Europe and the Caliphate around 800 AD. |
| Gold | 9 t | Production in Asturia, Callaecia, and Lusitania alone. |
Production of objects
Romans used many methods to create metal objects. Like Samian ware, moulds were created by making a model of the desired shape, which would then be pressed into a clay mould. In the case of a metal or wax model, once dry, the ceramic could be heated and the wax or metal melted until it could be poured from the mould. By pouring metal into the aperture, exact copies of an object could be cast. This process made the creation of a line of objects quite uniform. This is not to suggest that the creativity of individual artisans did not continue; rather, unique handcrafted pieces were normally the work of small, rural metalworkers on the peripheries of Rome using local techniques.There is archaeological evidence throughout the Empire demonstrating the large scale excavations, smelting, and trade routes concerning metals. With the Romans came the concept of mass production; this is arguably the most important aspect of Roman influence in the study of metallurgy. Three particular objects produced en masse and seen in the archaeological record throughout the Roman Empire are brooches called fibulae, worn by both men and women, coins, and ingots. These cast objects can allow archaeologists to trace years of communication, trade, and even historic/stylistic changes throughout the centuries of Roman power.