Roundabout interchange


A roundabout interchange is a type of interchange between a controlled access highway, such as a motorway or freeway, and a minor road. The slip roads to and from the motorway carriageways converge at a single roundabout, which is grade-separated from the motorway lanes with bridges.

Design

A roundabout interchange is similar to a rotary interchange, which uses a rotary rather than a roundabout. Roundabouts may also be used in conjunction with other interchange types such as a standard or folded diamond interchange, but such use should not be confused with a roundabout interchange.
Roundabout interchanges are extremely common in the United Kingdom and Ireland with hundreds on the motorway network alone. However, recent cost cutting has meant that dumbbell interchanges are increasingly used instead. These are essentially diamond interchanges with roundabouts instead of signals or stop signs where the slip roads meet the minor road. They are cheaper than roundabout interchanges as only one bridge is required instead of two.
Roundabout interchanges are much less common in North America but have been built more frequently since 1995, to improve safety, and to reduce traffic delays and bridge widening costs. However, many of the older and more dangerous rotary-style overpass interchanges have been signalized to improve throughput and safety, such as the former Drum Hill Rotary in Chelmsford, Massachusetts, in New England, where such interchanges are unusually common.
A divided diamond, in which the minor road is separated into four intersections, rather than two, also acts like a roundabout interchange, but it is more square in shape and, typically, has traffic light control.

Examples

A roundabout is used as an interchange between Quebec Autoroute 20 and Quebec Autoroute 520 in Montreal, Quebec. The roundabout is known as the Dorval Circle. Ramps to side streets are added as well. The interchange is currently being replaced.
is a three-level roundabout

Three-level stacked roundabout

The three-level stacked roundabout is a variation on the roundabout interchange in which both roads are grade-separated. It is similar to the three-level diamond interchange except that the small square of that latter interchange is enlarged to a true roundabout.
Three-level stacked roundabouts are quite common in Britain because they use less land than other four-way junctions where both roads are grade separated. However, they have lower capacity for turning movements - some have had direct-linking slip roads added later in an attempt to solve this problem. Examples of such junctions are found at Lofthouse, West Yorkshire and Swanley, Kent .