Rover V8 engine


The Rover V8 engine is a compact V8 internal combustion engine with aluminium cylinder heads and cylinder block, originally designed by General Motors and later re-designed and produced by Rover in the United Kingdom. It has been used in a wide range of vehicles from Rover and other manufacturers since its British debut in 1967.

History

The Rover V8 began life as the Buick 215, an all-aluminium OHV pushrod engine introduced in 1960 for the 1961 US model year. The compact, all aluminium alloy engine was light, at just, and capable of high power outputs: the most powerful Buick version of this engine rated, and the very similar Oldsmobile "Jetfire" turbocharged version made, both numbers SAE gross. Based on sales volume and press reports, the engine was a success. Buick produced 376,799 cars with this engine in just three years. A comparable number of Oldsmobile 215 engines were produced. In addition, some Pontiac models were fitted with the Buick 215, leading to the nickname "BOP 215" for the engine. The aluminium engine was relatively expensive to produce, however, and it suffered problems with oil and coolant sealing, as well as with radiator clogging from use of antifreeze incompatible with aluminium. As a result, GM ceased production of the all-aluminium engine after 1963, although Buick retained a similar 300/340/350 cid engine , as well as a V6 derivative which proved to have a very long and successful life.
In January 1964 Rover gave American operations head J. Bruce McWilliams permission to investigate the possible purchase of an American V8 engine for Rover cars. History relates that McWilliams first saw the Buick V8 at the works of Mercury Marine, where he was discussing the sale of Rover gas turbines and diesel engines to the company. However, it is likely that McWilliams was aware of the Buick engine before this. In any case, McWilliams realised that the lightweight Buick V8 would be ideal for smaller British cars. McWilliams and William Martin-Hurst began an aggressive campaign to convince GM to sell the tooling, which they finally agreed to do in January 1965. Retiring Buick engineer Joe Turlay moved to the UK to act as a consultant.
The Rover V8 has long been a relatively common engine for kit car use in Britain, much as the Chevrolet small-block V8 is for American hot rod builders. Even in the US there is a strong contingent of builders who select the Buick or Rover aluminium V8 engine for use in small sporty cars like the MGB. The 1964 Buick iron-block engine had aluminium cylinder heads, 3.75 bore and a longer 3.4" stroke crankshaft, which with modification can be used with the Buick 215 or Rover engine blocks to produce a high-output, very light weight V8 with displacement of up to about. The 300 crank, after machining the mains to the 215 size in the 215 block yields. Traco in the USA were prominent builders of such engines.
The British made engines were run on two SU carburettors, initially HS6 then HIF6 and HIF44 variants, then two CD175 Stromberg carburettors, Bosch L-Jetronic, then Hitachi Hotwire, then the GEMS system and finally Bosch Motronics for 2 years. The engine is still cast now, in an improved version, by Coscast in Birmingham, UK.
As well as appearing in Rover cars, the engine was sold by Rover to small car builders, and has appeared in a wide variety of vehicles. Rover V8s feature in some models from Morgan +8, TVR, Triumph TR8, Land Rover and MGB V8, among many others.
By the early 2000s, the Rover V8 started to become uncompetitive with other V8 engines in its class. It produced between 80-100 hp less than more modern V8 engines, it was not as fuel-efficient as newer V8s, and used an outdated 16-valve pushrod architecture, while V8 engines made by other luxury automakers used dual overhead-cams and 32 valves. With the switch to the BMW M62 V8 in the 2003 Range Rover, and the switch to Jaguar AJ-V8 engines in the 2005 Land Rover Discovery, the last mass-produced Rover V8 was made in May 2004, after 37 years of production, with the 2004 Land Rover Discovery being the last mass-produced vehicle to use it. The last Rover-branded vehicle that used the Rover V8 was the Rover SD1, which was discontinued in 1986 and replaced by the Rover 800, a rebadged version of the Honda Legend, a vehicle that was co-developed with Honda and Rover Group. It used a 2.7 litre variant of the Honda C engine as its top engine choice. MG Rover Group used a SOHC variant of the 4.6 L Ford Modular V8 engine for the Rover 75 and MG ZT 260 from 2003-2005. The Rover V8 remained with Land Rover when it was sold to Ford by BMW. Although Land Rover has switched to the Jaguar AJ-V8 engine for new applications, they wanted production of the engine to continue, and they arranged for production to restart in Weston-super-Mare under MCT, an engineering and manufacturing company. MCT will continue limited production of the engine for the foreseeable future, supplying engines for aftermarket and replacement use.
The Rover V8 based on the Buick design was not the first V8 engine produced by Rover. When the Rover Company was having engineering differences of opinion regarding the development of the Whittle turbine engine, the Wilks brothers did a deal with Rolls-Royce to swap technologies. The turbine engine project at Barnoldswick went to Rolls-Royce and Rover Co took over the V12 Meteor engine production used in a range of world war two tanks and the post war Centurion Tank -. From this a V8 variant was developed. The Rover Meteorite, also known as Rolls-Royce Meteorite, was a V8 petrol engine of capacity. In essence it was two-thirds of a V12 Meteor, and it shared the Meteor's 60° bank angle. Meteorites were built for heavy duty vehicles, for marine use and as stationary power units: it powered the Thornycroft Antar or Mighty Antar Tank Transporter – and as such was used to transport Meteor-engined tanks – and also heavy transport on the Snowy Mountains Hydro-Electric Scheme in Australia.

Racing

As the aluminium block made this engine one of the lightest stock V8s built, it was an obvious choice for use in racing. Mickey Thompson entered a car powered by this engine in the 1962 Indianapolis 500. From 1946 to 1962 there had not been a single stock-block car entered in this famous race. In 1962 the Buick 215 was the only non-Offenhauser powered entry in the field of 33 cars. Rookie driver Dan Gurney qualified eighth and raced well for 92 laps before retiring with transmission problems.
The Rover version of this engine was extensively developed and used for rallying, especially in Triumph TR8 sports cars.
The Australian Repco V8 F1 engine being based on Buick 215 block is technically a common misconception, as the Rover/Buick V8 had only 5 cylinderhead studs around each cylinder unit and that cannot accommodate the 6 stud Repco RB620 heads. The Repco V8 was based on Oldsmobile 215 block of the same era, which was very similar in appearance, size and material, but used 6 cylinderhead studs per cylinder. The subtle difference in block design/head clamping originated in Oldsmobile's intention to produce the higher power, turbo-charged Jetfire version of the small/light V8, however, the public/press tended not to be aware of the internal difference.
Hotstox use Rover V8 in their stock cars.

3.5 L

The initial Rover version of the engine had a displacement of. The bore and the stroke was. All Rover V8s were OHV pushrod engines with two valves per cylinder. It used a sand-cast block with pressed-in iron cylinder liners, and a new intake manifold with two HS6 type SU Carburettors. The Rover engine was heavier but stronger than the Buick engine, with a dry weight of about. It was first offered in the 1967 Rover P5B saloon, initially making at 5,200 rpm and of torque at 2,600 rpm on 10.5:1 compression. With the introduction of the Rover SD1 in 1976, the engine was improved with the 'rope' oil seals for the crankshaft ends replaced with lip seals, spark plug dimensions changed and the compression ratio lowered to 9.35:1.
Applications:
In the late 1970s, British Leyland became aware of the increasing importance of diesel engined cars to the British, European and North American markets in the wake of the 1979 energy crisis. It was decided that a new series of diesel engines powerful, refined and economical enough for use in BL cars was needed. However, with development funding tight, it was necessary to use existing BL petrol engines as a base. This included a diesel version of the V8, the development project for which was code-named 'Iceberg'.
BL collaborated with Perkins Engines of Peterborough to develop the engine. Both naturally aspirated and turbocharged versions were produced, both using a Stanadyne rotary mechanical fuel injection system. Power outputs of around 100 and 150 horsepower were achieved.
The Iceberg engine was slated for fitment in the Range Rover, Rover SD1 and the Jaguar XJ but the project encountered problems with failure of the alloy cylinder heads and internal cooling. They were limited by the need to use the same basic block casting as the petrol engine to allow the Iceberg engine to be produced on the same production line to reduce costs. Whilst these problems could have been overcome, the project ran into financial and logistical problems caused by the reorganisation of BL and specifically the splitting of Land Rover and Rover into separate divisions.
Land Rover took over production of the V8 engine in 1982, moving it from the main BL engine plant at Acock's Green into a new, much lower-capacity production line in the Solihull works, where it was built alongside the other Land Rover engines. This meant that there was no spare capacity to build diesel versions of the engine. Coupled to this, it was clear that the market for large diesel engined cars in North America had not developed as expected.
BL finally pulled out of the project in 1983. Perkins initially decided to pursue the project alone, and even produced advertising brochures for the engine as an industrial power unit, but BL withdrew all technical support and Project Iceberg was wrapped up in late 1983. BL's other collaboration with Perkins produced the highly successful 'Prima' unit. BL bought in 2.5-litre 4-cylinder turbodiesel units from VM Motori to use in the SD1 and Range Rover.

3.9/4.0

Land Rover used a version of the Rover V8 throughout the 1990s. Bore was increased to and stroke remained the same at. The engine was revised in 1995 and thereafter referred to as a 4.0 to differentiate it from the earlier version, although displacement was unchanged. The revisions consisted of a new intake and exhaust system, extra block ribbing, revised pistons, and larger cross-bolted main bearings. The 1995 4.0 produced and.
Production of the 4.0 ended in 2003. The final version of the engine, used in the 2003 Land Rover Discovery, produced at 4,750 rpm and at 2,600 rpm.
Applications:
In the early 1980s TVR approached Andy Rouse with a view to using his race-developed variant of the V8 in their Rover-powered TVR 350i 'wedge'; Rouse had successfully campaigned a Rover SD1 with a modified V8 on the track. For a number of reasons Rouse's version was not used, but the concept was passed to alternative engineering firms which resulted in a rare variant of the 3.9. This unit has cylinder bores and thus has a capacity of. Flat-topped pistons and high-lift camshaft gave a compression ratio of 10.5:1. TVR claimed 275 bhp as the output and whilst this is generally disregarded by aficionados, a healthy engine will produce in excess of 240 bhp. Once a reproducible specification had been determined, the bulk of engine production was undertaken by North Coventry Kawasaki, which company was subsequently purchased by TVR to become their in-house engine division known as TVR Power.
About 100 cars were built with the engine; TVR's later '400' offering being based on the then-current Range Rover 4L of.
Applications:
Land Rover extended the engine for the top LSE specification of the Classic Range Rover. The 4.2 L engine had a displacement of, and used the crankshaft castings from the failed "Iceberg" diesel engine project. Bore remained the same at, while stroke increased to.
Applications:
For the Griffith and Chimaera, TVR Power, a Coventry-based subsidiary of sportscar maker TVR, built a Rover V8-version with a displacement using the stroke crankshaft and bore size. The bore and stroke were identical to Rover's 4.2 engine but Rover rounded down to 4.2 L while TVR rounded up to 4.3 L.
The main difference between the Land Rover and TVR versions lies in the usage of Land Rover 3.9 pistons of which the tops were machined down to match the deck height, thus increasing static compression ratio. Head gaskets were originally copper and slightly thicker than the composite gaskets of later engines. TVR 4.3 engines tended to have elaborately ported cylinder heads with minimized valve guide protrusion into the ports, and Duplex timing chain with timing adjustment by vernier gear were specified although in practice, not all engines received it. Camshafts were usually Kent Cams 214 spec, although 'big valve' versions could have a 224 or even a 234 cam installed.
The so-called 'pre-cat' versions of the Griffith predominantly used this engine, although a 4.0-litre version was also available. The Chimaera was introduced with choice of 4.0- and 4.3-litre engines. A small number of 'Big Valve' versions, sporting modified cylinder heads with intake and exhaust valves and a more radical camshaft profile, found their way to early Griffiths and Chimaeras.
Applications:
produced a version of the aluminium V8 for their Australia-only 1973 Leyland P76. The bore and the stroke was, making it a square engine. The block deck height was extended and longer conrods were fitted between centres.
A Bendix Stromberg two-barrel carburettor was used in place of SU carburettors. This rare engine produced and and, although export versions were planned, the closure by British Leyland of their Australian operations in 1975 precluded the widespread application of this engine.
British Leyland did import one complete P76 engine for assessment but it was never fitted to a vehicle and was sold off on the demise of the company.
Applications:
Not to be confused with the later 4.6-litre engine which TVR badged as a '4.5' for the Chimaera, there also existed a version with an crank and bore giving capacity, which was used by TVR in the low-volume special 450 SEAC, the race version thereof and the subsequent Tuscan Challenge racers. A tiny number of Griffith and Chimaera road cars were built with a version of this engine, known as the '450 BV'.

4.6

In 1996, Land Rover enlarged the Rover V8 to. The bore remained the same size as the previous 4.0 at, but the engine was stroked by giving in total. Output was and.
Production of the 4.6 ended at Solihull, UK, in 2004. The final version, introduced in the Range Rover P38, produced at 4,750 rpm and at 2,600 rpm.
The last mass-produced application of the Rover V8 was in the Land Rover Discovery, up until the vehicle was redesigned in 2005. It is still used by some hand-built sports cars built by some independent manufacturers.
Applications:
A variant of the Rover V8 was used in two models by British sportscar manufacturer TVR. The bore and the stroke was. These models, the Griffith and Chimaera used the unit in their top-end specifications. The factory quotes up to and of torque.
Applications:
Moreover, in the mid-1980s, hot rodders discovered the 215 could be stretched to as much as, using the Buick 300 crankshaft, new cylinder sleeves, and an assortment of non-Buick parts. It could also be fitted with high-compression cylinder heads from the Morgan +8. Using the 5-litre Rover block and crankshaft, a displacement of is possible and used primarily in racing applications, stretching the design to its limits it is possible to achieve displacements of over and possibly even displacements near of, though the latter has not been tested in practice as of yet.
In addition to the 5.2, the V8 is available in 5.4 and 5.5 litre displacement.
There are also various specialist manufacturers who offer big valve cylinder heads with Chevy style adjustable roller rocker in standard to stage 4 performance configurations.