, and Richard Lindon started making footballs for the neighbouring Rugby School in 1823. The balls had an inner-tube made of a pig's bladder. Both men owned boot and shoe making businesses located close to Rugby school. In 1870, Richard Lindon introduced rubber inner-tubes and because of the pliability of rubber, the shape gradually changed from a sphere to an egg. Lindon and Bernardo Solano started making balls for Rugby School out of hand stitched, leather casings and pigs' bladders. The rugby ball's distinctive shape is supposedly due to the pig's bladder, although early balls were more plum-shape than oval. The balls varied in size in the beginning depending upon how large the pig's bladder was. Around 1862, Richard Lindon was desperate to find a replacement for the pig’s bladder and used an India rubber bladder instead. India rubber was too tough to inflate by mouth and so having been inspired by air syringes, he created a larger brass version to inflate his rugby balls. Lindon also claimed to invent the rugby ball and its distinctive oval shape but he didn't patent either the ball, the bladder or the pump. By the 1880s there were several manufacturers of 'footballs' in England all using the same process. The size and shape of the ball was not written into the rules until 1892, when it was determined as follows: - Length 11 to 11 1/4 inches - Circumference 30 to 31 inches - Circumference 25 1/2 to 26 inches - Weight: 12 to 13 ounces - Hand sewn with not less than 8 stitches to the inch In 1892 the RFU endorsed ovalness as the compulsory shape. The gradual flattening of the ball continued over the years. The introduction of synthetic footballs over the traditional leather balls, in both rugby codes, was originally governed by weather conditions. If the playing surface was wet, the synthetic ball was used, as it didn't absorb water and become heavy. Eventually, the leather balls were phased out completely. Polyester is used as backing material to hold the ball's oval shape, along with additional material for grips to enhance performance. The ball is stitched with polyester thread and coated with wax to make it more water-resistant.
Rugby union
The rugby ball used in rugby union is a prolate spheroid essentially elliptical in profile. Modern footballs are manufactured in a variety of colors and patterns. A regulation football is long and in circumference at its widest point. It weighs and is inflated to. In 1980, traditional leather-encased balls, which were prone to water-logging, were replaced with balls encased in synthetic waterproof materials. The Gilbert Synergie was the match ball of the 2007 Rugby World Cup. Most of the professional leagues use Adidas, Gilbert, Mitre or Webb Ellis manufactured balls.
is played with a prolate spheroid shaped football which is inflated with nitrogen. A referee will stop play immediately if the ball does not meet the requirements of size and shape. Traditionally made of brown leather, modern footballs are synthetic and manufactured in a variety of colours and patterns. Senior competitions should use light coloured balls to allow spectators to see the ball more easily. The football used in rugby league is known as "international size" or "size 5" and is approximately long and in circumference at its widest point. Smaller-sized balls are used for junior versions of the game, such as "Mini" and "Mod". A full size ball weighs between. Rugby league footballs are slightly more pointed than rugby union footballs and larger than American footballs. Both the AustralianNational Rugby League and the Super League use balls made by Steeden. Steeden is also sometimes used as a noun to describe the ball itself.
