SECR C class


The South Eastern and Chatham Railway C Class is a class of 0-6-0 steam locomotive, designed by Harry Wainwright and built between 1900 and 1908. They were designed for freight duties, although occasionally used for passenger trains. They operated over the lines of the railway in London and south-east England until the early 1960s. One example was rebuilt as an S Class saddle tank.

History

The SECR held trials in November 1898 to decide on a standard freight locomotive design. Two existing 0-6-0 locomotives were tested: former London, Chatham and Dover Railway B2 class No. 194 designed by William Kirtley; and former South Eastern Railway O class No. 436 designed by James Stirling. The Kirtley design proved superior and a new order for 40 locomotives based on it was placed. These new locomotives were designed by Harry Wainwright, the new Chief Mechanical Engineer of the railway, and formed the first of the C class.
The first fifteen locomotives were constructed by Neilson, Reid and Company and delivered in June 1900, followed by a further fifteen from Sharp, Stewart and Company. The remainder were built by the SECR workshops at Ashford and Longhedge Works.

Operational use

The locomotives were used on freight services and occasional passenger excursion trains, throughout the SER between Reading railway station and the Kent Coast. The last twelve locomotives were fitted with steam carriage heating equipment to enable them to be used to haul and prepare empty stock for express trains. The remainder of the class were also so equipped by the Southern Railway after 1923.

Accidents

In 1917 one example, no. 685 was converted into an S class 0-6-0ST for use as a heavy-duty shunter at Richborough port which was then being used to ship locomotives and armoured equipment to the Western Front. After the War it was used as a shunter at Bricklayers Arms until 1951.

Withdrawal

In common with other freight locomotives in Southern England, the class was very heavily used during the Second World War and repairs and maintenance deferred. As a result, one locomotive had to be withdrawn in December 1947, but the remaining 107 examples entered service with British Railways in 1948. Withdrawals of the remainder of the class began in 1953, but accelerated after the Kent Coast electrification in 1959-1960. However, three examples remained in Departmental stock as shunters at Ashford Works until 1966.
YearQuantity in
service at
start of year
Quantity
withdrawn
Locomotive numbersNotes
19171091685Rebuilt as 0-6-0ST, S class. Withdrawn 1951
1918–461080
194710821262, 1499
19481060
1949106231257, 31460
1950–511040
1952104131038
1953103631090, 31234/60/91, 31486, 31580
195497131572
195596731225/77/94, 31513, 31687, 31713/18
195689131063
195788331508, 31711–12
195885531018/59, 31461, 31582/93
1959801631071, 31191, 31219/21/27/43/45/52–53/70/72/97, 31576/85, 31681/8331272 to stationary boiler at Ashford Works as DS240.
1960641131033/54/86, 31102, 31223/87/98, 31581, 31688/92, 31725
1961530
1962535331004/37/61/68, 31112–13/50, 31218/29/42/55–56/67–68/71/80/93, 31317, 31480–81/95/98, 31510/73/75/78–79/83–84/88–90/92, 31682/84/86/89–91/93–95, 31714–17/19–2431592 to Ashford Works as DS239; withdrawn 1966.

Preservation

One, No. 592, has been preserved on the Bluebell Railway. In 2016, the locomotive was featured in the film, Fantastic Beasts and Where to Find Them.

Models

produce several versions of the C class in OO gauge with the initial release in 2013, they include the preserved example, as well as liveries from the Southern Railway and British Railways.
Bachmann announced on 8 January 2017 that an 'N' Gauge C Class would form part of their 2017 Graham Farish catalogue range. This is to be produced as SE&CR No. 271 in SE&CR plain green, as well as No. 1294 in Southern Railway Black and No. 31227 in British Railways Black with early British Railways emblem.