S number (wool)
An S number on the label of wool suits or other tailored apparel, wool fabric, or yarn, indicates the fineness of the wool fiber used in the making of the apparel, as measured by its maximum diameter in micrometres. Fiber fineness is one of the factors determining the quality and performance of a wool product. In recent years it has also become an important marketing device used by many mills, garment makers, and retailers. The S number appears as a plural with an s or 's following the number, such as 100s or 100's.
Super S
The S number often is used in conjunction with the word "super" which originally meant the best wool, As now used Super means pure new wool and can also be used for fabrics made from wool blended with rare fiber, and also with silk. The inclusion of Elastane to give the fabric a stretch effect is permitted, as also is the inclusion of up to 5% non-wool yarn for decorative effects. For wool blend fabric descriptions, the word Super is not permitted. Subject to the wool content being at least 45%, the S number may be used.The S-number indicates the thickness of the fibre as defined in the IWTO Super S Code of Practice. Each S-number correlates to a maximum fibre diameter measured in micrometers, as shown in the table below. Fiber diameters are measured from the finished, dyed fabric.
| Super … S number | Diameter of fibre in micrometers |
| 80 | 19.75 |
| 90 | 19.25 |
| 100 | 18.75 |
| 110 | 18.25 |
| 120 | 17.75 |
| 130 | 17.25 |
| 140 | 16.75 |
| 150 | 16.25 |
| 160 | 15.75 |
| 170 | 15.25 |
| 180 | 14.75 |
| 190 | 14.25 |
| 200 | 13.75 |
| 210 | 13.25 |
| 220 | 12.75 |
| 230 | 12.25 |
| 240 | 11.75 |
| 250 | 11.25 |
History
The S numbers originated in England, where the worsted spinning process was invented and arose from the worsted yarn count system for stating the fineness of yarn. The worsted count was the number of lengths of worsted yarn that of wool yields. The finer the wool, the more yarn and the higher the count.Metric yarn count
The worsted count was only a rough measurement and has been replaced by more exact methods such as the metric yarn count. However, for fine wool, the memory of the older system survives in the S numbers which have a very rough correspondence to worsted count. In other words, fiber that yielded about 80 worsted hanks is roughly comparable to fiber designated as 80s using the S numbers. The critical difference is that while the worsted number was an indirect measure of yarn thickness, the S number is a direct measurement of the thickness of the fiber. The S number of fiber, and hence of yarn, fabric, or garments made of that fiber, is determined using the international standard promulgated by the International Wool Textile Organisation.International standard
The International Wool Textile Organisation is the promulgator of the Fabric Labelling Code of Practice which governs the use of the "S" and "Super S" designations for fine wool and wool blend fabrics. The Code defines the S number by correlation to maximum fiber diameter. For example, 80s must have maximum fiber diameter of 19.75 micrometres or finer and 90s, 19.25 micrometres or finer. This scale continues to the 210s at 13.25 micrometre or finer. Thus each step of ten corresponds to 0.5 micrometre less in allowed maximum fiber diameter. It has been proposed to extend the scale to 250s at 11.25 micrometre or finer.IWTO is the international body representing the interests of the world's wool textile trade and industry. IWTO membership covers wool growers, traders, primary processors, spinners, weavers, garment makers and retailers of wool and allied fibers in its member-countries, as well as all kinds of organizations related to wool products and the wool business in general.