Shinai
A shinai is a Japanese sword typically made of bamboo used for practice and competition in kendo. Shinai are also used in other martial arts, but may be styled differently from kendo shinai, and represented with different characters. The light, soft wood used in a shinai distinguishes it from other wooden swords such as a bokken, which is generally made of heavier, sturdier wood.
History
The earliest use of a bamboo weapon to train with instead of a sword is credited to Kamiizumi Nobutsuna of the Shinkage-ryū. The modern shinai, with four slats of bamboo, is generally credited to Nakanishi Chuzo Tsugutate of Nakanishi-ha Ittō-ryū. The shinai was developed in an effort to reduce the number of practitioners being seriously injured during practice, making a practice weapon that was less dangerous than bokutō, the hard wooden swords they were previously using. This is also the motivation behind the development of bōgu, the armour that protects the kendoka.Due to its lighter weight compared to a bokken or a metal katana, a shinai can be wielded in a fashion that allows quicker strikes than would be practicable with a heavier sword. This also makes shinai popular in producing movies and television shows; a prop shinai with a thin metal covering can look similar to a metal sword, while allowing cinematic, showy strikes that are nevertheless fairly safe to perform.
Etymology
The word "shinai" is derived from the verb shinau, meaning "to bend, to flex", and was originally short for shinai-take. Shinai is written with the kanji, meaning "bamboo sword", and is an irregular kanji reading.In kendo, it is most common to use a single shinai, sometimes called itto style. Some kendoka choose to use two shinai. This kendo style is usually called ni-tō, a style that has its roots in the two-sword schools of swordsmanship such as Hyōhō Niten Ichi-ryū. A ni-to combatant uses a long shinai called the daitō, which is usually held in the right hand, and a shorter shinai, called the shōtō, which is usually held in the left hand. The holding position can be switched, however, with the daito in the left hand and the shoto in the right. The daitō is shorter and lighter than a shinai used in the itto style of kendo. Specifications for shinai used in kendo competitions that follow the International Kendo Federation rules, are below.
Construction
Sizes and style of shinai vary. For example, an adult may be able to use a shinai that is too heavy for a younger person, so shinai with different sizes and characteristics are made. Shinai are available in many styles and balances. A shinai should not be confused with a bokutō, which has a much more similar shape and length to a Japanese sword and is made from a single piece of wood. However, both shinai and bokken are used in kendo.The slats of a shinai are usually made from dried bamboo. Some may also be treated by smoking them, or soaking them in resin. Shinai slats are also made of carbon fibre, reinforced resin, or other approved alternative materials.
The shinai comprises four slats known as, which are held together by three leather fittings: a hilt, or handle wrapping ; a fitting at the tip and a leather strip that binds the four slats. The parts are all secured with a string.
The nakayui is tied about one-third of the length of the exposed bamboo from the tip. This holds the slats together and also marks the proper kendo striking portion of the shinai, or.
Inserted between the ends of the slats, under the saki-gawa, is a plastic plug, and under the tsuka-gawa there is a small square of metal, that holds the slats in place.
A hand-guard is then fitted on the tsuka-gawa before it ends and the bamboo slats show. This is held in place by a rubber ring.
Safety
Far from dangerous, a shinai is used as a practice sword in order to simulate the weight of a katana or a bokken without injuring the user or the target. The four slats tied together are specifically designed to reduce the force of impact of a blow. Upon hitting the target, the four staves flex and compact together, spreading the force of the blow over a longer period of time. This significantly reduces the harm it can impart on a target, leaving at worst a bruise even when wielded by the strongest users.Proper care
A shinai must be properly taken care of or it can pose a danger to both the user and the people around it. Shinai should be inspected for splinters and breaks before and after use, and maintained in a manner considered most appropriate by one's style, dōjō, or sensei.Many people believe that oiling and sanding a shinai prior to its first use, and then periodically during use, can greatly extend its life. However, some disagreement exists on what is considered proper shinai care.
To properly inspect a shinai, one first examines the area around the datotsu-bu, inspecting all sides of the shinai for splinters. This is very important, as bamboo splinters can easily cause injury. The saki-gawa should be intact and the tsuru should be tight so that the saki-gawa does not slip off the end of the shinai during use. In addition, the nakayui should be tight enough as not to rotate easily.
When not in use, shinai used in kendo practice should be either laid on the floor or leaned vertically against a wall. Some instructors require the base of the handle on the floor and the tip leaning against the wall. In kendo, the shinai is treated as a substitute for a metal sword and should be treated as if it was as dangerous.
When a shinai is placed on the floor, it is considered poor etiquette to step over it.
Regulations
In kendo competitions that follow the FIK rules, there are regulated weights and lengths for the use of shinai.| Specification | Gender | Junior High School | Senior High School | University students and Adults |
| Maximum length | Male & Female | 114cm | 117cm | 120cm |
| Minimum weight | Male | 440g | 480g | 510g |
| Minimum weight | Female | 400g | 420g | 440g |
| Minimum diameter of sakigawa | Male | 25mm | 26mm | 26mm |
| Minimum diameter of sakigawa | Female | 24mm | 25mm | 25mm |
| Minimum length of sakigawa | Male & Female | 50mm | 50mm | 50mm |
Shinai are weighed complete with leather fittings, but without tsuba or tsuba-dome. The full length is measured. Maximum diameter of the tsuba is 9cm.
| Specification | Gender | Daito | Shoto |
| Maximum length | Male & female | 114cm | 62cm |
| Weight | Male | 440g minimum | 280–300g maximum |
| Weight | Female | 400g minimum | 250–280g maximum |
| Minimum diameter of sakigawa | Male | 25mm | 24mm |
| Minimum diameter of sakigawa | Female | 24mm | 24mm |
Shinai are weighed complete with leather fittings, but without tsuba or tsuba-dome. The full length is measured. Maximum diameter of the tsuba is 9cm.
Fukuro-shinai
The ancestor of the modern kendo shinai is the fukuro-shinai, which is still in use in koryū kenjutsu. This is a length of bamboo, split multiple times on one end, and covered by a leather sleeve. This explains the name fukuro, which means bag, sack or pouch. Sometimes the older and rarer kanji tō is used, but has the same meaning as fukuro.Some schools cover the entire bamboo in the sleeve and add a tsuba, like Kashima Shinden Jikishinkage-ryū does. In Shinkage-ryū, the sleeve is lacquered Kamakura Red, and rather than covering the entire length, is tied off at the non-split end. This particular kind of fukuro-shinai is also called a hikihada, or toad-skin shinai. The name comes from how the leather looks after lacquering; the sleeves are actually made of cow or horse-hide.