Smith & Wesson Model 15
The Smith & Wesson K-38 Combat Masterpiece, Revolver Model 15 is a six-shot double-action revolver, with adjustable open sights, built on the medium-size "K" frame. It is chambered for the.38 Special cartridge and is fitted with a barrel, though additional barrel options have been offered at various times during its production. Originally known as the "K-38 Combat Masterpiece", it was renamed the Model 15 in 1957 when all Smith & Wesson revolvers were given numerical model numbers. It is a shorter barrel version of the Smith & Wesson Model 14 Target Masterpiece and essentially an adjustable-sight version of the seminal Smith & Wesson Model 10 revolver with target shooting features. The main production run of the Model 15 was from 1949 through 1999. It was discontinued for approximately a decade until 2011, when a re-tooled version was re-released under S&W's Classics Revolvers line.
History
The Smith & Wesson K-38 Combat Masterpiece Revolver Model 15 is a derivative of the classic 1899 K-frame Military and Police.38 S&W Special six-shot double-action revolver. The M&P underwent steady evolution throughout the 20th century and S&W spun off several variations as separate models in the post World War II years. One of these was the K-38 Target Masterpiece, which began production in 1947. The Target Masterpiece included a number of new and/or special features, including a six-inch barrel with a narrow rib to provide a level sight plane, a Patridge front sight, a micrometer click rear sight, S&W’s.375” short-throw hammer, a trigger adjustment for overtravel, and improved grips. Noting the accuracy of the Target Masterpiece, a number of police departments and the FBI soon requested the same revolver with a four-inch barrel and a Baughman Quick Draw front sight. The result was the K-38 Combat Masterpiece. The major distinction between the K-38 Target Masterpiece and the K-38 Combat Masterpiece is the barrel length and the front sight.In 1957 the K-38 Combat Masterpiece was renamed the Model 15 when all Smith & Wesson revolvers were given numerical model numbers. The model number is stamped on the frame behind the cylinder yoke, so it is visible when the cylinder is open. A number of production and engineering changes have been made throughout the years, some of which are noted by a dash number suffixed to the Model number.
Over the years the Model 15 has been produced with several barrel lengths, with 4" and 2" being the most common. In 1972 S&W released a stainless steel version as the Model 67. In 1997 the hammer and internal lockworks were modified from an on-the-hammer firing pin / internal hammer block to a floating firing pin / MIM flat hammer, and kept the hammer block that, unlike a transfer bar safety design, moves up with the trigger pull. The hammer hits a transfer bar, transferring the strike to the firing pin, while the block in a hammer block system moves down with the trigger pull, unblocking the hammer from the firing pin, allowing the hammer to strike the firing pin. These two safety systems work oppositely, but achieve the same goal of only allowing the gun to fire when the trigger is pulled all the way.
The Model 15 was a popular sidearm for law enforcement and was the standard issue sidearm of the U.S. Air Force Police from 1962 until 1992 when it was replaced by the Beretta M9 pistol.
Production of the Model 15 was discontinued in 1999 when Smith & Wesson was purchased and reorganized, although a couple limited run "Heritage Series" models were released in 2001 and 2002. In 2011 Smith & Wesson re-introduced the Model 15 under their Classics Revolvers line, newly machined, with a shrouded redesigned barrel, and a built-in trigger lock.
Specifications
- Caliber: .38 S&W Special
- Capacity: 6
- Barrel: 4”
- Length overall: 9 1/8” With 4” barrel
- Weight loaded: 34 oz. With 4” barrel
- Sights: Front – 1/8” Baughman Quick Draw on plain ramp. Rear: S&W Micrometer Click Sight, adjustable for windage and elevation.
- Frame: square butt with grooved tangs
- Stocks: checked walnut service with S&W monograms
- Finish: S&W blued carbon steel with sandblasting and serrations around sighting area to break up light reflections
- Trigger: S&W grooving with adjustable trigger stop
- Ammunition: .38 S&W Special,.38 S&W Special Mid Range,.38 + p
Engineering and production changes timeline
- 1949, K-38 Combat Masterpiece introduced
- 1955, Delete upper sideplate screw
- 15, 1957 K-38 Combat Masterpiece continued as the Model 15; stamping of model number
- 15-1, 1959 Change extractor rod, right hand to left hand thread
- 15-2, 1961 Delete trigger guard screw, change cylinder stop
- 15-2, 1964 Introduce 2” heavy barrel
- 15-3, 1967 Relocation of rear sight leaf screw
- 15-3, 1968 Delete diamond grips
- 15-4, 1977 Change to put gas ring from yoke to cylinder; pinned barrel eliminated
- 15-5, 1982
- 15-5, 1986 Introduction of 6” and 8-3/8” barrel
- 15-6, 1988 New yoke retention system/ radius stud package/hammer nose bushing
- 15-6, 1988 Discontinue 8-3/8” and 2” barrel
- 15-6, 1992 Discontinue 6” barrel, blue finish only
- 15-7, 1994 Synthetic grips introduced, drill and tap frame, change rear seat leaf, change extractor
- 15-7, 1995 Delete square butt
- 15-7, 1996 Begin shipments in blue plastic case
- 15-7, 1997 4” barrel only; change to MIM thumbpiece; shipped with master trigger locks; change to MIM trigger
- 15-8, 1997 Changes in frame design: cylinder stop stud eliminated; eliminate serrated tangs; change to MIM hammer with floating firing pin and change internal lockworks
- 15-8, 1999 Model 15 discontinued in November
- 15-8, 2001 Limited run Lew Horton Heritage Series from the S&W Performance Center.
- 15-9, 2002 Limited run Lew Horton Heritage Series McGivern Models from the S&W Performance Center. 3 Models commemorating Ed McGivern’s world speed records in 1934 with a revolver. All models have a Patridge front sight with Gold Bead, round butt frame with Altamount Fancy checkered service grips of that era, 6” barrel, Ed McGivern commemorative plate mounted on right side of frame, Heritage Series box.
- 15-10, 2011 Reintroduced in Classics Revolvers line, re-tooled, shrouded redesigned barrel, internal trigger lock
Military and police usage
The Air Force issued two types of.38 Special duty ammunition for the Model 15, originally the M41.38 Special Ball cartridge, or the later-developed Caliber.38 Special, Ball, PGU-12/B High Velocity cartridge. The M41 was a low pressure cartridge rated at 13,000 psi, originally designed for 158-grain ball ammunition, but loaded with a 130-grain FMJ bullet. The PGU-12/B, issued only by the U.S. Air Force, had a greatly increased maximum allowable pressure rating of 20,000 psi, sufficient to propel the 130-grain FMJ bullet at from a solid test barrel, and from a revolver barrel.
The S&W Model 15 revolvers were replaced by the Beretta M9 pistol in 9×19mm caliber beginning in 1985, with complete turnover by the early 1990s.
In addition to military use, the Model 15 was issued by many police departments across the United States as well as various federal law enforcement agencies. In 1972 S&W produced a stainless steel version of the Model 15 which it termed the Model 67.
Users
The LAPD's Model 15 revolvers were modified to be fired double-action only. This was accomplished by the department armorer who ground the full cock notch from the hammers. Officers were then trained to shoot combat style without ever cocking the weapons. This change was likely the result of unintended injuries and/or property damage, and of litigation against the LAPD after officers had cocked their weapons only to have them discharge inadvertently, possibly as a result of physical attacks or having been startled in the course of searching for suspects. In lawsuits, the principle of res ipsa loquitur was easily affirmed because "an inadvertent weapon discharge is a negligent discharge".Overland Park Police Department used the revolver before going to semi-automatic Beretta 92 pistols.